• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.551-556
• /
• 2004

The theoretical method is developed to investigate the vibration characteristics of the combined cylindrical shells with an annular plate joined to the shell at any arbitrary axial position. The structural rotational coupling between shell and plate is simulated using the rotational artificial spring. For the translational coupling, the continuity conditions for the displacements of shell and plate are used. For the uncoupled annular plate, the transverse motion is considered and the in-plane motions are not. And the additional transverse and in-plane motions of the coupled annular plate by shell deformation are considered in analysis. Theoretical formulations are based on Love's thin shell theory. The frequency equation of the combined shell with an annular plate is derived using the Rayleigh-Ritz approach. The effect of inner-to-outer radius ratio, axial position and thickness of annular plate on vibration characteristics of combined cylindrical shells is studied. To demonstrate the validity of present theoretical method, the finite element analysis is performed.

• 한국소음진동공학회논문집
• /
• 제13권10호
• /
• pp.767-776
• /
• 2003

The theoretical method is developed to Investigate the nitration characteristics of the combined cylindrical shells with an annular plate joined to the shell at any arbitrary axial position. The structural coupling between shell and plate is simulated using two types of artificial springs a translational spring is introduced for translational coupling and a rotational spring is used for rotational coupling. The springs are continuously distributed along circumferential direction. Using the Rayleigh-Ritz method the natural frequencies and mode shapes of the combined shell with an annular plate examine. The effect of Inner-to-outer radius ratio, axial position of annular plate and length-to-radius ratio of shell on vibration characteristics of combined cylindrical shells is studied. The theoretical results are verified by comparison with FEM results.

• 기계저널
• /
• 제33권7호
• /
• pp.636-647
• /
• 1993

평판과 셸은 그 하중 지지의 효율성 때문에 각종 구조물에 널리 사용되고 있다. 그러나 여러 종류의 불연속은 어쩔 수 없이 존재하게 된다. 대형 구조물의 출입을 위한 개구부의 존재나, 관과 노즐의 결합 부위 등 복잡한 형상을 가지면서 생기는 기하학적 문제, 재료에 원래 존재하는 균 열이나 개재물(inclusion) 등의 문제가 그 예가 될 것이다. 집중하중이나 선하중 등은 넓은 의미의 불연속으로서 힘에 의한 것으로 볼 수 있으나, 보다 문제가 되는 것은 변위의 불연속으로 이해될 수 있는 균열의 문제일 것이다. 이균열의 존재는 구조물의 안전성에 미치는 효과가 커서 중요한 연구 대상이 되어 있다. 또 해석적 방법으로 풀기도 까다로운데, 여기서는 이 문제를 다루는 해 석적 방법들을 살펴보고, 또 효율적으로 계산할 수 있는 반해석적(semi-analytical) 방법을 도입한 수 대표적인 평판과 셸 문제를 예로 들어본다.

• 대한기계학회논문집A
• /
• 제29권3호
• /
• pp.439-446
• /
• 2005

The theoretical method is developed to investigate the vibration characteristics of the combined cylindrical shells with an annular plate joined to the shell at any arbitrary axial position. The structural rotational coupling between shell and plate is simulated using the rotational artificial spring. For the translational coupling, the continuity conditions for the displacements of shell and plate are used. For the uncoupled annular plate, the transverse motion is considered and the in-plane motions are not. And the additional transverse and in-plane motions of the coupled annular plate by shell deformation are considered in analysis. Theoretical formulations are based on Love's thin shell theory. The frequency equation of the combined shell with an annular plate is derived using the Rayleigh-Ritz approach. The effect of inner-to-outer radius ratio, axial position and thickness of annular plate on vibration characteristics of combined cylindrical shells is studied. To demonstrate the validity of present theoretical method, the finite element analysis is performed.

• 소음진동
• /
• 제8권5호
• /
• pp.936-948
• /
• 1998

A theoretical formulation for the analysis of free vibration of a cylindrical shell with a circular plate attached at an arbitrary axial position of the shell under various kinds of boundary conditions was derived and programed to get the numerical results for natural frequencies and mode shapes of the combined system. The boundary conditions of the shell to be considered here are clamped-free, clamped-simply supported, both ends clamped and both ends simply supported. The frequencies and mode shapes from theoretical calculation were compared with those of commercial finite element code, ANSYS. The results showed good agreement with those of ANSYS in frequencies and mode shapes. The program will contribute to the design optimization of a shell/plate combined system through the analysis of natural frequencies and mode shapes for the system.

• 소음진동
• /
• 제9권1호
• /
• pp.149-162
• /
• 1999

A method for the analysis of free vibrations of steel and plain weave composite cylindrical shells with a longitudinal, interior rectangular plate is developed by using the receptance method. This method is based on the ratio of a deflection (or slope) response to a harmonic force(or moment) at the joint. In this study, after getting the free vibration characteristics of the simply supported plate and shell, the frequency equation of the combined system is obtained by considering the continuity condition at the joint between the plate and the shell. The numerical results are compared with published results and experiment results in order to show the validate of the formulation, and shown that the analytical results agreed with those from other methods. The effects of the location and the thickness of the plate on the natural frequencies are also investigated.

• 소음진동
• /
• 제7권2호
• /
• pp.331-345
• /
• 1997

A theoretical formulation for the analysis of free vibration of clamped-free cylindrical shells with plates attached at arbitrary axial position(s) was completed and it was programed to get the numerical results which yield natural frequencies and mode shape of the combined system of the plate and the shells. The frequencies and mode shapes from theoretical calculation were compared with those of commercial finite element code, ANSYS. In order to validate the theory, modal test was also performed by impact test and FFT analysis. The results shows good agreement with those of ANSYS and test results in frequencies and mode shapes. The method developed herein is likely to be used for the analysis of the free vibration of the clamped-free circular cylindrical shells with any kinds of lids such as hollow circular plates, conical shells, spherical shells, or semi-spherical shells.

• 한국소음진동공학회논문집
• /
• 제14권5호
• /
• pp.370-376
• /
• 2004

The overall aim of this paper is to determine coupling loss factor of welding point between shell and cylinder using loss factor and structural loss factor. For this purpose, two kinds of loss factor were adopted. One is loss factor of each sub structure, another is structural loss factor based on the complex welded or assembled structure. Using these two parameters, it ispossible to derive the coupling loss factor which represent characteristic condition of SEA theory. Coupling loss factor of conjunction in complex structure was expressed as power balance equation. The derived equation for a coupling loss factor has been simplified on the assumption of one way (uni-directional) power flow between multi-sub structures. Using these conditions, it is possible to find the equation of coupling loss factor expressed as above two loss factors. To check the effectiveness of above equation, this paper used two-stage application. The first approach was application between simple cylinder and shell. The next was adopted rotary compressor. Rotary compressor has three main conjunctions between shell and internal vibration part. This equation was applied to find out the optimum welding point with respect to reduce the noise propagation. It shows the effective tool to evaluate the coupling loss factor in complex structure

• 동력기계공학회지
• /
• 제19권5호
• /
• pp.52-59
• /
• 2015

This paper is presented for the free vibration of a conical shell with annular plates or circular plate using the transfer of influence coefficient. The governing equations of vibration of a conical shell, including annular plate, are written as a coupled set of first order differential equations by using the transfer matrix of the shell. Once the transfer matrix of a single component has been determined, the entire structure matrix is obtained by the product of each component matrix and the joining matrix. The natural frequencies and the modes of vibration were calculated numerically for joined conical-annular plates. The validity of the present method is demonstrated through simple numerical examples, and through comparison with the results of finite element method, transfer matrix method and ANSYS. The conclusion show that the present method can accurately obtain natural vibration characteristics of the conical shell with annular or circle end plates.

• Journal of the Korean Wood Science and Technology
• /
• 제46권1호
• /
• pp.17-28
• /
• 2018

본 연구에서는 당화 공정 중 축합된 구조로 발생되는 고형 부산물인 황산리그닌(Sulfuric acid lignin; SAL)의 나노 세공 탄소 소재로의 활용 가능성을 살펴보고자 수산화칼륨 촉매를 투입하여 $750^{\circ}C$에서 1 h 동안 고온 촉매 활성화 공정을 진행하였다. 이때 타 바이오매스 시료 유래 활성탄과의 물성 비교를 위해 코코넛셸(CCNS), 소나무(Pinus), Avicel로부터 각각 같은 방법으로 활성탄을 제조하였으며 화학 조성과 결합 구조, 표면 및 기공 분포 특성을 분석하였다. 열중량 분석 결과 최종 온도 $750^{\circ}C$에서 잔존 고형분 함량은 SAL > CCNS > Pinus > Avicel 순서였으며 이 경향은 활성화 공정 후 생성된 활성탄의 수율 순서와 동일하였다. 특히, SAL 유래 활성탄은 탄소 함량이 91.0%, $I_d/I_g$ peak ratio가 4.2로 가장 높게 나타났으며 이는 높은 탄소 고정성과 더불어 비정질의 거대 방향족 구조층이 형성되었음을 의미한다. 또한 제조된 활성탄은 모두 최초 시료의 비표면적($6m^2/g$)과 기공 부피($0.003cm^3/g$)에 비해 촉매 활성화 공정 후 각각 $1065{\sim}2341m^2/g$, $0.412{\sim}1.270cm^3/g$로 크게 증가하였으며 이 중 SAL 유래 활성탄의 표면 변화율이 가장 크게 나타났다. 이후 3종의 유기 오염물질(페놀, 2,4-Dichlorophenoxyacetic acid, 카보퓨란)에 대한 제거율을 평가해보았을 때 모든 활성탄에서 표준 용액 100 ppm 대비 90 mg/g 이상의 높은 흡착 능력을 보였다. 따라서 축합된 구조인 SAL으로부터 고비표면적의 나노 세공 활성탄 제조가 가능할 뿐만 아니라 추후 유기 오염 물질 제거를 위한 카본 필터의 친환경 흡착 소재로 활용가능성이 높을 것으로 기대된다.