• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.2
• /
• pp.14-26
• /
• 2002

A new model for degenerate semiconductor quantum well devices was developed. In this model, the multi-subband Boltzmann transport equation was formulated by applying the Pauli exclusion principle and coupled to the Schrodinger and Poisson equations. For the solution of the resulted nonlinear system, the finite difference method and the Newton-Raphson method was used and carrier energy distribution function was obtained for each subband. The model was applied to a Si MOSFET inversion layer. The results of the simulation showed the changes of the distribution function from Boltzmann like to Fermi-Dirac like depending on the electron density in the quantum well, which presents the appropriateness of this modeling, the effectiveness of the solution method, and the importance of the Pauli -exclusion principle according to the reduced size of semiconductor devices.

• Water for future
• /
• v.27 no.1
• /
• pp.141-150
• /
• 1994

The purpose of this study is develope the algorithm of channel routing model which can be used for flood forecasting. In routing model, the hydrulic technique of the implicit scheme in the dynamic equation is chosen to route the unsteady varied flow. The channel routing model is connected with conceptual watershed model which is able to compute the flood hydrograph from each subbasin. The comparative study shows that the conceptual model can simulate the watershed runoff accurately. As a result of investigating the channel routing model, the optimal weighting factor $\theta$ which fixes two points between time line is selected. And also, the optimal error tolerance which satisfies computing time and converge of solution is chosen.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.8
• /
• pp.648-653
• /
• 2014

Fly-wheel, gimbal antenna, mechanical gyro and cryocooler with moving parts generate a micro-vibration during their on-orbit operation. For the acquisition of high quality image of observation satellite, additional technical efforts are required to reduce the micro-vibration level from the vibration sources. In this study, we proposed a passive isolation system combined with a tuned mass damper-type energy harvester to generate electrical energy from the micro-vibration which has always been subjected to useless isolation objectives. The feasibility of the system has been investigated through the numerical simulation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.145-152
• /
• 1997

A coupling of two-dimensional model and GIS technique is applied to simulate sediment transport analysis. Accurate transformations are performed for the data which have various reduced scales. Basic maps are discretized the mesh of true scale for the finite element model by using the digital map and the Traverse Mercator coordinate. Under $200m^3/s$ flow rate condition, velocity vectors, depth contours, velocity contours and deposition contours are Presented for the 5km reach of midstream of Keum River from confluence of Ji-chun to Baekche Bridge. The simulation results of the study agree well with those of one-dimensional varied flow analysis and observed data. The flow and deposition pattern revealed a meandering characteristics of the river qualitatively.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.6
• /
• pp.605-611
• /
• 2007

A ship is composed of many grillage structures especially the deck which is consists of primary girders, transverse and longitudinal members. Several holes are arranged on these primary members for pipes, vents, etc. which cause stress concentration due to the discontinuity of the member. It is not easy to get the stress values around all these holes because of the huge amount of time necessary for computations. In this paper, a simple method to compute for the stress around the holes is suggested. This method is composed of two steps which are grillage analysis for primary members and detailed stress analysis using the results of the grillage analysis. This method is made for the design of the primary members with openings supporting the deck structure.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.217-218
• /
• 2016

본 논문에서는 LCCL-S 토폴로지를 가지는 무선전력전송 시스템에서 부하 및 결합계수에 따른 입력 전류 고조파를 분석한다. 분석한 입력전류의 고조파를 통하여 스위칭 손실 및 도통 손실을 예측한다. 고조파 해석의 타당성을 검증하기 위해 PSIM 시뮬레이션 및 실험을 수행한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.413-418
• /
• 2006

본 연구는 자갈하상을 갖는 하천에 대해 조도계수를 산정하고자 하상에 분포하는 입자에 작용하는 전단응력을 이용하여 등가조도를 산정하고 대상유량에 대해 수위를 산정할 수 있는 모형을 개발하였다. 개발된 모형의 적용성은 섬진강 하류부의 구례수위표와 송정수위표 구간에 대해 적용하였다. 그 결과 구례수위표지점에서 등가조도는 0.088m로 산정되었고, 이를 이용하여 Wark(1990)가 제시한 단위유량에 대한 연속방정식과 운동량방정식을 결합한 간단한 모형을 이용하여 각각의 대상유량에 대해 수위를 산정하였으며, 그 결과 6%이내의 오차를 보였다. 그리고 대상유량에 대해 계산된 수위를 이용한 부등류 해석을 실시하여 조도계수를 각각의 유량에 대해 산정하였다. 그 결과 관측된 수위와 계산된 수위에 의해 산정된 조도계수의 오차가 $0{\sim}0.002(6%)$의 오차를 보였고, 유량별로 조도계수를 산정할 수 있어 조도계수의 가변성도 고려할 수 있었다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.157-162
• /
• 2010

This paper describes the thermal fatigue life prediction models for 95.5Sn-4.0Ag-0.5Cu solder joints of Flip chip package considering Under Bump Metallurgy(UBM). A 3D Finite element slice model was used to simulate the viscoplastic behavior of the solder. For two types of solder bump pitches, simulations were analyzed and the effects of underfill packages were studied. Consequently, it was found out that solder joints with underfill had much better fatigue life than solder joints without underfill, and solder joints with $300{\mu}m$ bump pitch had a longer thermal fatigue life than solder joints with $150{\mu}m$ bump pitch. Through the simulations, flip chip with lead-free solder joints should be designed with underfill and a longer bump pitch.

• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.206-208
• /
• 2005

본 논문에서는 휴대용 소형 무선기기에 적용 될 수 있는 광 대역 소형 무선랜 안테나가 소개되었다. 제안된 안테나는 전형적인 역-F형 방사부를 가지고 결합급전을 사용하는 1/4파장 안테나를 모델로 개발되었다. 수치해석 결과에 따라 견본 안테나가 제작되었고 특정 기기에서 최적의 특성을 얻기 위해 수정을 거친 후에 본 논문에서 제안된 안테나가 제작되었다. 본 논문에서 제안된 안테나는 5GHz 주파수 대역에서 동작하고 주로 PDA나 노트북에 장착되어 사용 될 수 있다. 제시된 모든 결과들은 실제 실험용 PDA에 장착된 상태에서 얻어진 것이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.38-42
• /
• 2010

기후변화에 의해 집중호우의 빈도 및 강도가 증가하고 지속적인 유역개발에 따른 토지이용의 증가는 토양침식 및 토사유출로 인한 재해 및 환경문제를 야기한다. 현재 광범위하게 사용되고 있는 토양침식량 산정기법은 대부분 대상유역내의 평균 토양침식량을 산출하는 총량적 개념의 경험식이므로 호우기간동안의 유역 침식/퇴적의 시 공간적 변화양상을 모의할 수 없다는 한계를 지니고 있다. 따라서 보다 합리적인 유역규모의 강우-유사-유출 메카니즘 해석을 위해서는 집중형(lumped) 모의기법을 대체하고 다양한 기상학적/지형학적 디지털 정보를 활용할 수 있는 물리적 기반의 분포형 모형이 요구된다. 본 연구에서는 사면의 지표 및 지표하 흐름을 고려한 유출모의 모듈과 단위수류력(Unit Stream Power)이론을 기반으로 유사유출 모의모듈을 결합한 분포형 강우-유사-유출 모형을 개발하고, 용담댐 상류부의 천천유역에 적용하여 개발된 모형의 재현성 평가를 수행하였다.