• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.238-243
• /
• 1994

본 논문에서는 여러가지 형태의 결합부에 적용할 수 있는 일반적인 모델링 기법에 대하여 기술하였다. 기존의 해석방법은 특정한 결합부에만 적용이 가능하고 유한요소해석과 실험이 상호 보완적인 관계를 가진 형태의 해석방법이므로 실험이 불가능한 경우에 대해서는 적용하기 어려운 경우도 있다. 본 논문에서는 별도의 실험을 수행하지 않고 결합부 영역만을 상세하게 유한요소 모델링을 하여서 선택된 자유도에 대한 유연성 행렬(Flexibility Matrix)을 구하여 결합부의 특성을 구하는 일반적 모델링 기법을 제시하였다. 이 방법은 수치적으로 축약할 수 없는 모델-결합부가 접촉면(Contact Surface)을 가지고 있는 구조물을 효과적으로 축약할 수 있는 장점이 있다. 또한 모델링되는 결합부의 경계조건의 영향을 배제할 수 있으며 결합부에 존재하는 비선형성도 적정범위내에서 선형화할 수 있다. 제시한 일반적 모델링 기법을 나사 결합부, 접착제 결합부(Glued Joints), 볼트 결합부에 적용하여 결합부이 특성을 구하였으며 실험을 통하여 제시한 해석방법의 타당성을 검증하였다.

• Journal of KSNVE
• /
• v.9 no.2
• /
• pp.258-264
• /
• 1999

The purpose of this paper is to investigate the damping behavior of a flexible joint. The slip at a structrual joint is selected at the tips of two identical cantilever beams adjoining each other. Both the direction of normal force and its magnitude varies due to the global deformation of the structure from mode to mode in the friction model. The friction dependent on vibration displacements resultsin the same functional behavior of the hysteretic material damping. Linearized energy loss factors are obtained as functions of both linear and torsional spring stiffness for their groups of symmetric and anti-symmetric modes, respectively. Experimental measurements as made for comparisons with analytical estimations by controlling the magnitude of fastening torque in the fastener, Hi-Lite. Trends on damping levelsmeasured in a very common vibration test method make an excellent agreement on the estimated damping levels.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.6
• /
• pp.589-596
• /
• 2014

Joints, fasteners or connected parts frequently have a significant effect on the dynamical behavior of assembled mechanical structures. Therefore, the analytical prediction of structural responses depends on the accuracy of joint modeling. This paper deals with the formulation and analysis of dynamic mechanism for joint flexibilities whose relevant magnitudes of stiffnesses are investigated by using linear and torsional springs. The equation of motion is derived by using a generic joint in the middle of clamped-clamped beam. A reanalysis due to changes in magnitudes of joint stiffnesses is based on the reduced analysis where the binomial series terms are used as basis vectors. The solution procedures are straightforward and the method can be readily used with a general finite element method. The computational effort needed by this approach is usually much smaller than the effort needed for complete vibration analysis. Two numerical examples show that accurate results are obtained efficiently by reducing the number of degree in the reduced model.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04a
• /
• pp.608-614
• /
• 1995

공작기계 등과 같이 복잡한 대형 구조물의 구조해석에 있어서 결합부요소의 강성과 질량특성을 모델링하는 일반적 인 방법이 없는 실정이므로 어려움이많다. 본 연구에서는 공작기계에서 흔히 쓰이는 Slide-way contact joint 결 합부를 등가의 강성행렬 요소(Generalized stiffness matrix element)로 모델링하는 방법을 제안하였다.. 기존의 유 한용소 해석법 프로그램을 이용하여 결합부 유한요소 모델의 유연도계수(Flexibility influence coefficients)를 계산하고 Guyan의 정축약이론을 이용하여 등가의 강성행렬요소로 축약시키는 방법이다. 제안된 방법을 대형 평면연 삭기 구조해석에 적용하고, 그 결과를 강결합 모델의 결과 및 Yoshimura의 등가스프링결합부 모델을 사용한 경우의 결과와 비교하므로써 본 연구에서 제안한 결합부 모델링 방법의 유용성을 확인하였다.

• Journal of Korean Foot and Ankle Society
• /
• v.5 no.1
• /
• pp.91-101
• /
• 2001

편평족은 내측 세로궁이 소실되어 족저부가 편평하게 되는 변형의 총칭으로, 소아에서 흔하 고 보호자들의 관심이 많은 질환이다. 이학적 검사상 후족부의 외반과 전족부의 외전소견을 보이며, 감별질환을 위해 정확한 이학적 검사와 방사선학적 검사를 필요로 한다. 원인으로는 유연성 편평족, 종골 외반, 선천성 수직 거골, 부주상골, 족근골 결합등이 있으며 정상적 유 아의 경우 시간경과에 따라 저절로 호전되는 유연성 편평족이 대부분이다. 따라서 병적 편평족이 아닌 경우 편평족의 원인과 양호한 자연경과를 보호자에게 설명하는 것이 중요하다. 본 논문에서는 소아 편평족의 감별질환을 위한 각 질환에 있어서의 이학적 소견과 검사소견 그리고 이들의 치료에 대해 살펴 보고자 한다.

• Journal of Sensor Science and Technology
• /
• v.8 no.5
• /
• pp.377-387
• /
• 1999

A piezoelectric flextentional deep-water sonar transducer has been designed using a coupled FE-HEM. The dynamics of the sonar transducer is modelled in three dimensions and is analyzed with external electrical excitation conditions. Different results are available such as steady-state frequency response for TX displacement modes, directivity patterns, resonance frequencies, TVRs. While the conventional barrel-stave typed sonar transducer of the piezoelectric material is designed, the external surface of the transducer is modified in order to allow the same hydrostatic pressure to be applied onto the inner and the outer surfaces of the transducer. With this modification for deep-water application, a new resonance mode is generated at lower frequency. This lower resonance mode can be adjusted according to the degree of the outer surface modification.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.444-447
• /
• 2007

인터넷 환경의 변화와 함께 많은 서비스가 오픈 API 형태로 지원되면서 이들을 결합하고 이용하는 웹 기반의 클라이언트 프로그램이 모바일 환경의 주요한 어플리케이션 형태로 등장했다. 또한 차세대 웹 폼 언어인 XForms는 간편하고 효과적인 UI기술 언어로서 알려져 있으며, 다양한 모달리티를 지원할 수 있고 장치 독립성을 제공할 수 있어 모바일 장치에 더 적합하다. 본 논문에서는 오픈 API를 지원하는 XFroms 페이지를 설계하고, XForms의 특징을 살려 성능 및 표현력을 개선한 브라우저를 구현하였다. 또한 오픈 API를 사용하는 모바일 블로그 서비스를 XForms기반 오픈 API 페이지들을 통해 작성함으로써 제안된 시스템의 표현력과 유연성을 증명하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.559-567
• /
• 1999

A piezoelectric flextentional sonar transducer has been simulated using a coupled FE-BEM. The dynamics of the sonar transducer is modelled in three dimensions and is analyzed with external electrical excitation conditions. Different results are available such as steady-state displacement modes, underwater directivity patterns, resonant frequencies, bandwidths, quality factors, output acoustic powers and transmitting voltage responses. It is shown that the present barrel-stave sonar transducer of the piezoelectric material produces flextentional displacements which could be related with higher output power, lower quality factor and more omnidirectional beam pattern than other types of sonar transducers. The results of the present sonar transducer modelling are also compared with those of a commercial package such as ATILA.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.831-836
• /
• 1994

This paper presents rational modeling and analysis method for complex structures with various structural joints. For modeling of structural joint, a general modeling technique is newly proposed by flexibility influence coefficient and inverse of flexibility matrix and static reduction concept which is applied to the retained DOFs(degrees of freedom) of detailed finite element model of struction joints. By this method,joint model with contact surface. which can not be reduced by the general reduction theory such as Guyan reduction theory ,can be reduced effectively. And in this method, the nonlinearity of the contact surface can be linearized within a proper range and the boundary effects of joint region can be excluded. Using the proposed method, screwed joint,glued joint and bolted joint are analyzed. And the effectiveness of the proposed method is verified by experiments.

• Journal of KSNVE
• /
• v.8 no.1
• /
• pp.57-74
• /
• 1998

This paper is concerned with a combination of experimental and analytical investigation aimed at identifying modeling errors, accounted for the lack of correlation between experimental measurements and analytical predictions of the modal parameters for lap joint panels. A nonlinearity vibration test methodology, initiated from the theoretical analysis, is suggested for measurements of dynamic stiffnesses in a lap joint using the rivet fastener. Based on the experimental evidence on discrepancies between measured and predicted frequencies, improved finite element models of the joint are developed using PATRAN and ABAQUS, in which the beam element size is evaluated from the joint stiffnesses readily determined in the test. The beam element diameter as a principal design parameter is tuned to match experimental results within the evaluated bound value. Frequencies predicted by the proposed numerical model are compared with frequencies measured by the test. Improved predictions based on this new model are observed when compared with those based on conventional modeling practices.