• Applied Chemistry for Engineering
• /
• v.2 no.3
• /
• pp.222-228
• /
• 1991

The cmc values of the arbitrary surfactants were estimated by the method of the multivarial explanation by the computer that put in the suitable score of the various kinds of the structural unit. The 1.00 in the total. We can obtain reasonably accurate cmc values for the surfactant with the simple molecular structure.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.237-237
• /
• 2003

교환바이어스(exchange bias)현상은 강자성과 반강자성의 접합계면에서 강한 상호 교환결합력에 의해 발생하는 것으로 알려져 있다. 이 현상은 1956년 Meiklejohn과 Bean에 의해 CoO층으로 둘러싸인 Co 입자에서 발견된 이후[1], 강자성과 반강자성의 접합계면을 가지는 다층박막에서의 교환바이어스에 대한 연구가 진행되어왔다[2-6]. 이는 강자성/반강자성 박막의 교환바이어스 특성을 이용하여, 강자성 박막의 스핀방향을 고정시킬 수 있기 때문이다. 이러한 교환바이어스 특성은 하드드라이브의 고밀도 자기헤드소자 및 비휘발성 자기메모리소자에 응용되어지는 등 경제적 가치를 갖는 기술적인 면과 교환바이어스라는 자기특성의 학문적인 가치로 인해 이 분야에 대한 집중적인 투자와 연구가 이루어지고 있다. 최근에는 교환바이어스 현상의 원인과 형성기구에 대한 연구가 활발히 진행되고 있다. 그러나 강자성과 반강자성 박막의 단거리 상호 교환결합력에 의한 교환바이어스 현상은, 계면의 원자구조, 자기구조 및 각자성층의 여러 가지 인자들에 대해서 지속적으로 연구되고 있다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.236-236
• /
• 2003

교환바이어스(exchange bias)현상은 강자성과 반강자성의 접합계면에서 강한 상호 교환결합력에 의해 발생하는 것으로 알려져 있다. 이 현상은 1956년 Meiklejohn과 Bean에 의해 CoO층으로 둘러싸인 Co 입자에서 발견된 이후[l], 강자성과 반강자성의 접합계면을 가지는 다층박막에서의 교환바이어스에 대한 연구가 진행되어왔다[2-6]. 이는 강자성/반강자성 박막의 교환바이어스 특성을 이용하여, 강자성 박막의 스핀방향을 고정시킬 수 있기 때문이다. 이러한 교환바이어스 특성은 하드드라이브의 고밀도 자기헤드소자 및 비휘발성 자기메모리소자에 응용되어지는 등 경제적 가치를 갖는 기술적인 면과 교환바이어스라는 자기특성의 학문적인 가치로 인해 이 분야에 대한 집중적인 투자와 연구가 이루어지고 있다. 최근에는 교환바이어스 현상의 원인과 형성기구에 대한 연구가 활발히 진행되고 있다. 그러나 강자성과 반강자성 박막의 단거리 상호 교환결합력에 의한 교환바이어스 현상은, 계면의 원자구조, 자기구조 및 각자성층의 여러 가지 인자들에 대해서 지속적으로 연구되고 있다.

• Journal of the Korean Vacuum Society
• /
• v.6 no.3
• /
• pp.187-193
• /
• 1997

We investigated the initial growth mode of Cu deposited on polyimide at room temperature using x-ray photoelectron spectroscopy. We could find that when Cu is sputter-deposited on the polymide, Cu-N-O complex of strong interaction is mainly formed first, Cu-oxide of weak interaction is formed successively, and then finally metallic Cu grow. From these results, we could conclude that Cu/polyimide interface consists of Cu-N-O complex and Cu-oxide.

• Korean Journal of Materials Research
• /
• v.7 no.7
• /
• pp.582-586
• /
• 1997

본 연구에서는 플라즈마 화학 증착법으로 기판에 따른 DLC 박막의 접착력 변화를 조사하였다. 박막의 분리가 발생하기 시작하는 경우의 두께를 임계두께로 정하여 스크래치 테스터로 측정된 임계하중과 더불어 박막의 잡착강도값으로 사용하였다. 다이아몬드상 탄소박막은 실리콘 기판에서 가장 우수한 접착력을 가지는 것으로 나타났으며, 크롬>티타늄>철>세라믹 기판의 순으로 접착력이 감소하였다. XPS, AES 분석을 사용하여 계면에서 결합구조와 결합형태 등을 관찰하여 접착력과의 관계를 조사하였다. 그 결과 다이아몬드상 탄소박막의 접착강도는 막/기판의 계면에서의 탄화물 형성에 영향을 받으며, 계면에서의 초기산화물층에 큰 영향을 받는것을 확인하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.2
• /
• pp.52-59
• /
• 2023

The effects of dielectric curing temperature and temperature/humidity treatment conditions on the interfacial adhesion energies between Ti diffusion barrier/polybenzoxazole (PBO) dielectric layers were systematically investigated for Cu redistribution layer applications of fan-out wafer level package. The initial interfacial adhesion energies were 16.63, 25.95, 16.58 J/m² for PBO curing temperatures at 175, 200, and 225 ℃, respectively. X-ray photoelectron spectroscopy analysis showed that there exists a good correlation between the interfacial adhesion energy and the C-O peak area fractions at PBO delaminated surfaces. And the interfacial adhesion energies of samples cured at 200 ℃ decreased to 3.99 J/m² after 500 h at 85 ℃/85 % relative humidity, possibly due to the weak boundary layer formation inside PBO near Ti/PBO interface.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.1
• /
• pp.105-112
• /
• 2008

The purpose of this study was to evaluate the contact angle made by 3 kinds of self etching primers (Clearfil SE Bond, AdheSE, and Tyrian) on dentin and to measure the microtensile bond strength of resin composite to dentin using these self-etching primers. Contact angle between each of 3 self etching primers and polished dentin surface was measured (n=30) by contact angle analyzer and the result was analyzed by One-way ANOVA. For the measurement of microtensile bond strength, polished dentin surface was treated with each of 3 self etching primers and dentin adhesives. Z-250 composite resin was built-up with a height of 5 mm on the adhesive-treated surface and light cured for 40s with a halogen light curing unit. Thereafter, each tooth was sectioned into slabs perpendicular to the bonded interface and trimmed (n=45). The microtensile bond strength was measured with universal testing machine and the result was analyzed with Kruskal-Wallis test. AdheSE group showed the highest contact angle followed by Clearfil SE group and Tyrian group (p<0.05). AdheSE group and Clearfil SE group showed significantly higher microtensile bond strength than Tyrian group (P<0.05).

• Polymer(Korea)
• /
• v.27 no.4
• /
• pp.275-284
• /
• 2003

The positive temperature coefficient (PTC) effects of high density polyethylene (HDPE)/carbon black composite materials were investigated by enhancing adhesive characteristics of electrodes and controlling HDPE chemical crosslinking. When the silver paste was used as an electrode for the same 45 wt% HDPE/carbon composites, the resistance was over 1 $\Omega$, which should be compared with the resistance of 0.2 $\Omega$ for the dendritic copper electrode. In general, the silver-paste electrode exhibited higher electrical resistance than cupper electrode due to the interfacial resistance between the electrode and PTC composites. The HDPE/carbon composite exhibited typical PTC characteristics maintaining a constant resistance up to vicat point and showing a maximum at the melting point of HDPE. The crosslinked HDPE significantly decreased the negative temperature coefficient (NTC) phenomena, and desirably showed a constant or slightly increasing feature of electrical resistance in the high temperature region.

• Composites Research
• /
• v.30 no.4
• /
• pp.247-253
• /
• 2017

In this study, the mechanical behavior and interface properties of boron nitride nanotube-poly(methyl methacrylate) nanocomposites are predicted using the molecular dynamics simulations and the double inclusion model. After modeling nanocomposite unit cell embedding single-walled nanotube and polymer, the stiffness matrix is determined from uniaxial tension and shear tests. Through the orientation average of the transversely isotropic stiffness matrix, the effective isotropic elastic constants of randomly dispersed microstructure of nanocomposites. Compared with the double inclusion model solution with a perfect interfacial condition, it is found that the interface between boron nitride nanotube and polymer matrix is weak in nature. To characterize the interphase surrounding the nanotube, the two step domain decomposition method incorporating a linear spring model at the interface is adopted. As a result, various combinations of the interfacial compliance and the interphase elastic constants are successfully determined from an inverse analysis.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.4
• /
• pp.1003-1009
• /
• 2021

A study on the associative properties of sodium hyaluronate (NaHA) and Alkane-bis (dimethylalkylammonium bromide) surfactants in aqueous solution was investigated in relation to the chemical structure of surfactants. As a result of measuring the interfacial tension, a parabolic graph showing the minimum value (c_min) at a specific concentration was shown. Above this minimum concentration the increase in interfacial tension is thought to be related to the formation of aggregates of NaHA chains and dimeric surfactants. The plot of viscosity vs surfactant concentration shows a slight maxium at c_min and a viscosity decrease at high surfactant concentrations. Viscosity nonlinear behavior is related to the size increase due to the complex growth and to the size shrinkage following from the interaction with electrolyte ions and free micelles. The results of surface tension measurements show a broad region of surface tension decrease, indicating the NaHA-surfactant interaction. The increase in surface tension above c_min may be related to the adsorption of clusters, consisting of free NaHA chains and dimeric surfactant. The strong adsorption of surfactant is observed at high concentrations.