• Journal of the Korean earth science society
• /
• v.30 no.2
• /
• pp.153-164
• /
• 2009

We examined the regional 1-D deep resistivity structure of the Korean Peninsula using MT data acquired at seven sites located in the Kyongsang Basin and Kyonggi Massif. At the sites located in the Kyongsang Basin, surrounding sea distorts observed MT response and hence this distortion, so called "sea effect", is corrected using an iterative tensor stripping method. The 1-D layered inversion results for the seven MT sites reveal 4 layered structure, which is composed of 1) near surface layer, 2) upper crust, 3) lower crust and upper mantle, and 4) asthenosphere from the surface downward. Conrad interface, which is a boundary between upper and lower crust, is distinctly identified beneath all the MT sites. Conrad interface depth is estimated to about be 17km in the Kyongsang Basin and about 12km in the Kyonggi Massif, while the upper crust of the Kyongsang Basin is about 5 times more resistive than that of the Kyonggi Massif. Finally, asthenosphere is inferred to exist below a depth of approximately 100km with a resistivity of 200-300 ohm-m.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.73-78
• /
• 2005

본 연구에서는 서울시 한강에 위치한 교량을 대상으로 다양한 조망점에 따른 경관조명의 물리량을 측정하고 그 특성을 분석함으로써 동일한 연구대상에 대하여 조망점이 달라졌을 때 나타나는 물리적 변화를 통해 경관조명분야의 물리량평가방법론의 새로운 접근방법론을 제시하는 것이 목적이다. 이를 위하여 연구대상의 선정은 교량구조형식에 따라 분류하고. 경관조명이 설치된 교량 17개소 중 다양한 조망점과 현장측정의 편리성 등을 고려하여 광진교(거더교), 올림픽대교(사장교), 동작대교(트러스교), 동작대교(아치교)를 연구대상으로 선정하였다. 조망점은 한강둔치를 이용하는 방문객들이 바라보는 투시뷰, 교량주변 건축물에서 바라보는 건물뷰 그리고 교량 위를 이동하면서 바라보는 주행뷰로 구분하였다. 이러한 연구방법으로 도출된 결과는 동일한 경관조명연출을 토대로 교량별 조망점에 따른 휘도측정 및 분석에서 측정되는 각도, 거리, 방향에 따라 정형화된 비율은 아니지만 휘도값에 있어서 차이가 있다는 것을 확인 할 수 있었으며, 투시뷰와 건물뷰는 동일한 교량 구성요소를 갖고 있어 상호간 비교 분석이 가능하고 경관조명평가 요소로서 그 기능을 담당 할 수 있다고 판단되며, 주행뷰는 교량형식과 가로등의 영향을 많이 받으므로 평가요소로써 조망점을 활용하기에는 조금 더 깊은 연구가 선행되어야 할 것으로 보인다. 따라서 경관조명을 평가함에 있어 다양하게 바라보는 조망점은 조명연출로 인한 시각적 인식에 차이를 유발시킬 수 있어 경관조명을 평가할 때 다양한 조망점의 설정이 보다 객관적이고 정확한 분석이 가능할 것으로 판단된다.ridinium의 분포는 chlorophyll-a농도와 밀접한 관련성이 있었다. 담수적조의 현존량은 상류지역에서 $8.5\;{\times}\;10^3\;cell\;mL^L{-1}$로서 많았고, 댐부근의 하류지역($4.4\;{\times}\;10^2\;cell\;mL^L{-1}$)으로 갈수록 감소하는 양상을 보였다. 또한, 담수적조의 원인종으로 규조류 Synedra acus와 남조류 Microcystis aeruginosa도 소량관찰되었다. 저수지의 수질 부영양화 현상은 기존 경사사면형 농경지를 기반으로 조성되었으므로 저층으로부터 풍부한 영양환경을 내재하고 있었고, 담수 초기에 발생할 수 있는 가능성을 포함하고 있었다. 또한 유입수량의 부족과 현재 수질개선을 위해 적용하고 있는 수중폭기시설등의 물리적인 영향도 직 ${\cdot}$ 간접적으로 작용하였을 것으로 추정되었다 따라서 향후 이에 대한 중장기적인 모니터링이 필요하였고 유역과 저수지의 통합적인 수질관리계획 이 요구되었다.group으로, 용존산소량, 전기전도도, pH, 인산염이 정점 3, 4, 5에서 같은 group으로 묶였다.유의적인 CAT 활성 증가효과가 나타났고, 간조직의 시토졸 1획분에서는 대조군 대비 15${\sim}$27%의 CAT 활성 증가효과가 인정되었다. 이상의 결과에서 목초액의 장기간 투여는 간조직 중의 활성산소의 억제효과뿐만 아니라 방어시스템으로서 활성산소 제거효소의 역할도 충실히 수행하여 노화를 효과적으로 예방하고 억제할 수 있을 것으로 기

• Journal of KIISE:Software and Applications
• /
• v.31 no.4
• /
• pp.411-419
• /
• 2004

When the imaging object rotates in image plane during MRI scan, its rotation causes phase error and non-uniform sampling to MRI signal. The model of the problem including phase error non-uniform sampling of MRI signal showed that the MRI signals corrupted by rotations about an arbitrary center and the origin in image plane are different in their phases. Therefore the following methods are presented to improve the quality of the MR image which includes the artifact. The first, assuming that the angle of 2-D rotational motion is already known and the position of 2-D rotational center is unknown, an algorithm to correct the artifact which is based on the phase correction is presented. The second, in case of 2-D rotational motion with unknown rotational center and unknown rotational angle, an algorithm is presented to correct the MRI artifact. At this case, the energy of an ideal MR image is minimum outside the boundary of the imaging object to estimate unknown motion parameters and the measured energy increases when the imaging object has an rotation. By using this property, an evaluation function is defined to estimate unknown values of rotational angle at each phase encoding step. Finally, the effectiveness of this presented techniques is shown by using a phantom image with simulated motion and a real image with 2-D translational shift and rotation.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.2
• /
• pp.227-234
• /
• 2020

Under consideration of construction waste recycling, candidate secondary products applicable for the civil and construction areas can be reliably employed based on the recycling cost analysis. For the validation purpose, probability-based cost analyses were performed to estimate recycling cost profit considering uncertainties. When recycling construction wastes, the costs at each stage are fully dependent on target products to be adopted. To achieve commercialization of each product, its quality has to be improved with economic efficiency through accurate evaluation of input costs. Based on the probabilistic recycling cost analysis, the cost benefit for target products was estimated with waste classification cost, transportation cost to recycling treatment facilities and production cost. All necessary information on the cost analysis were collected from literature, disclosure, and existing recycling companies. In addition, a cost difference between recycled and non-recycled events was made. As a result, a probability-based recycling cost estimate for candidate secondary products was herein presented.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.381-391
• /
• 2008

The eigenvalue technique is introduced to overcome the problem of truncation errors caused by temporal discretization of numerical analysis. The eigenvalue technique is different from simulation in that only the space is discretized. The spatially discretized equation is diagonized and the linear dynamic system is then decoupled. The time integration can be done independently and continuously for any nodal point at any time. The results of eigenvalue technique are compared with the exact solution and FEM numerical solution. The eigenvalue technique is more efficient than the FEM to the computation time and the computer storage in the same conditions. This technique is applied to the solute transport analysis in nonuniform flow fields around underground storage caverns. This method can be very useful for time consuming simulations. So, a sensitivity analysis is carried out by using this method to analyze the safety of caverns from nearly located contaminant sources. According to the simulations, the reaching time from source to the nearest cavern may takes 50 years with longitudinal dispersivity of 50 m and transversal dispersivity of 5 m, respectively.

• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.729-734
• /
• 2004

This study was performed to analyze the sequence variations of mtDNA D-loop and their effects on milk in Hanwoo(Korean cattle). The resulting sequences were compared with previously published sequences for other cattle breeds (GenBank JOI394). The Polymerase Chain Reaction was performed to amplify a total of 964 bp between nucleotide 15758 and 383 within D-loop region of mtDNA using specific primers. Twenty polymorphic sites by nucleotide substitution were found in mtDNA D-loop region of Hanwoo. The frequencies of positions at 8, 169, 16042, 16051, 16057, 16093, 16119, 16122, 16209, 16255 and 16302 nt with high levels of sequence polymorphism were 0.150, 0.950, 0.085, 0.138, 0.106, 0.085, 0.138, 0.212, 0.085, 0.148 and 0.180, respectively. The substitution effect at 16119(p<0.1) and 16185(p< 0.05) nt was found significant on milk production. Polymorphism of mtDNA sequence in D-Ioop region could be useful for the analysis of cytoplasmic genetic variation and associations with the other economically important traits and maternal lineage analysis in Hanwoo.

• Journal of Animal Science and Technology
• /
• v.54 no.4
• /
• pp.241-246
• /
• 2012

The goal of this study was to verify the phylogenetic status of the Korean native goats (KNG). We determined the complete sequence of the mitochondrial cytochrome b gene in 48 goats among four populations. We also analyzed genetic variability within goats, and a phylogenetic analysis was performed by comparison with other country's goats. Three nucleotide substitutions were detected, and two of these were missense mutations that occurred due to a substitution of amino acid. Four haplotypes were defined from KNG. Three of these haplotypes were only found in the Chinese goat. However, the other haplotype was KNG-specific. In the phylogenetic analysis, four clades (A~D) were classified among domestic goats, and the KNG was classified into clade 1 that estimated as lineage A based on the D-loop sequence. Each haplotype from the KNG was clustered closely with that of the Chinese goat. The results of haplotype distribution and phylogenetic location suggest that strong gene flow occurred from China to the Korean Peninsula.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.328-335
• /
• 2013

The purpose of this study was to evaluate the height of workbench in dental lab for ergonomic body type which dental technicians are suitable and suggest to effective improvement of workspace. For this purpose, we measured the height, weight, body sizes of total 77 junior majoring in dental laboratory science where they study school located in Gyeonggi and Chungcheong area and we research uncomfortable body type when they had a clinical training. For comparative analysis we had visited 15 dental lab and 2 dental lab of general hospital and we had measured the height of workbench and desk including chair and then We had statistical analysis measured value. Especially we analyzed the important factor causing inconvenience for work environment. As a result, we had examined, we found following results The sand table was the most uncomfortable equipment, when they have clinical training. There is no correlation between sexual characteristics of junior in college and selection of uncomfortable equipment. It is reasonable to assume that sand table which is lower than recommended height brings out inconvenience. It is analyzed that the optimum height of sand table in dental lab for junior in college is lower than the recommended height. The optimum height of sand table in dental lab has deviation according to height of junior in college. The height of worktable in dental lab was lower than recommended height. The recommended range could not apply to posture of dental technician with different height uniformly.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.414-421
• /
• 2015

This paper presents a new method to decompose a duplicated ECG signal, which is measured from two people, to two individual ECG signals. In paper, it is shown that the duplicated ECG signal can be decomposed, provided that their SAECG signals are known. As the SAECG signal is the average of a ECG signal, it is a feature to identify individual ECG signals from the duplicated signal. Since the ECG signal is nearly periodic, so-called heart-rate, the period of each ECG signal can be found by using the autocorrelation of the duplicated signal, That is, the autocorrelation has high peaks at the multiple instants of heart-rate of each person. With the heart-rate of each person obtained by some processing, all R-peaks are identified by the SAECG signals. To be concrete, the SAECG signal of each person is repeatedly placed at the R-peak instants with his heart-rate, and the weight of each SAECG signal is computed by LMSE optimization. Finally, as adding the error signal in the LMSE optimization processing to the weighted SAECG signal, each individual ECG signal is obtained. In experimental results, we demonstrate that the duplicated ECG signal is successfully decomposed into two ECG signals.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.205-215
• /
• 2008

As static traffic assignment has reached its limitation with ITS policy applications and due to the increase of interest in studies of ITS policies since the late 1980's, dynamic traffic assignment has been considered a tool to overcome such limitations. This study used the Dynameq program, which simulates route choice behavior by macroscopic modeling and dynamic network loading and traffic flow by microscopic modeling in consideration of the feasibility of the analysis of practical traffic policy. The essence of this study is to evaluate the feasibility for analysis in practical transportation policy of using the dynamic traffic assignment technique. The study involves the verification of the values estimated from the dynamic traffic assignment with South Korea's expressway network and dynamic O/D data by comparing results with observed link traffic volumes. This study used dynamic O/D data between each toll booth, which can be accurately obtained from the highway Toll Collection System. Then, as an example of its application, exclusive bus-lane policies were analyzed with the dynamic traffic assignment model while considering hourly variations.