Journal of the Korean Crystal Growth and Crystal Technology
/
v.24
no.5
/
pp.190-195
/
2014
Because of the temperature gradient occurring during the growth of the ingot with directional solidification method, defects are generated and the residual stress is produced in the ingot. Changing the growth and cooling rate during the crystal growth process will be helpful for us to understand the defects and residual stress generation. The defects and residual stress can affect the properties of wafer. Generally, it was found that the size of grains and twin boundaries are smaller at the top area than at the bottom of the ingot regardless of growth and cooling condition. In addition to that, in the top area of silicon ingot, higher density of dislocation is observed to be present than in the bottom area of the silicon ingot. This observation implies that higher stress is imposed to the top area due to the faster cooling of silicon ingot after solidification process. In the ingot with slower growth rate, dislocation density was reduced and the TTV (Total Thickness Variation), saw mark, warp, and bow of wafer became lower. Therefore, optimum growth condition will help us to obtain high quality silicon ingot with low defect density and low residual stress.
새로운 증착방법인 UHV-ECRCVD를 이용하여 기판온도 $440^{\circ}C$의 저온에서 격자이온이 일어나지 않고 완벽한 정합상태를 유지하고 있는 무전위 SiGe 에피박막을 성장시켰다. 박막의 두께는 기계적 평형이론(mechanical equilibrium theory)인 Mattews-Blakeslee 임계두께를 초과하였으며, 따라서 본 연구에서 사용하는 낮은 기판온도에 의해 격자이완이 억제되고 있음을 알았다. 한편 성장시에 가해주는 GeH4의 유량이 증가함에 따라 박막내에 GeH4으로부터 생성된 무거운 ion의 기판입사량이 증가하여 격자손상(lattice damage)에 의한 결함이 증가하므로 높은 Ge 함량을 갖는 무전위 SiGe 에피박막을 얻을 수 없었다. 그러나 전체압력을 증가시켜서 에피층을 성장시키면 격자손상에 의한 결함은 생성되지 않았으며, 따라서 전체압력을 증가시키면 높은 Gegkafid을 갖는 무전위 SiGe 에피박막을 성장시킬 수 있을 것이라고 생각된다. 이것은 전체압력 증가로 인해 ECR 플라즈마 안의 전자온도가 감소하여 성장을 주도하는 활성종(reactive species)이 ion에서 radical 로 바뀌기 때문이라고 추정하였다. 본 연구에서는 박막의 Ge 함량이 증가함에 따라 에피층의 성장속도가 증가하는 현상을 관찰하였다. 따라서 ECR 플라즈마를 사용하는 본 연구에서도 표면에서의 수소탈착이 성장속도결정단계임을 알 수 있었다. 한편 인입률(incorporation ratio)은 1에 근접하였으며, 이것은 플라즈마에 의한 원료기체의 분해과정이 thermal CVD와는 달리 무차별적으므로 SiH4과 GeH4의 분해효율이 크게 다르지 않기 때문이라고 추정하였다.
Proceedings of the Materials Research Society of Korea Conference
/
2012.05a
/
pp.85-85
/
2012
NiO는 니켈 공공과 침입형 산소 이온에 의한 비화학적양론 특성 때문에 자발적으로 p-형 반도체 특성을 나타내는 것으로 알려져 있다. NiO는 3.7 eV 의 넓은 밴드갭을 가지고 있어 투명소자를 위한 hole injection layer 나 hole transport layer로 사용하기 위한 연구가 많이 이루어지고 있다. 또한, 안정적인 p-형 반도체 특성은 n-형 산화물 반도체와의 접합을 통해 복합소자의 구현이 용이하기 때문에, ZnO 등과의 접합을 통한 소자 구현이 가능하다.[1] 하지만, 기존의 많은 연구에서는 내부의 결함이 많이 존재하는 다결정 박막을 사용하였기 때문에, 전하의 이동에 제한이 발생해, 충분한 소자 특성을 나타내지 못하였다. 최근 Dutta의 연구에 의하면, 결정질 사파이어 기판위에 박막을 성장할 경우 [111] 방향으로 우선 배향성을 가진 NiO 박막을 얻을 수 있다고 알려져 있다.[2] 본 실험에서는 NiO 박막을 이용한 PN 접합소자 구현을 위해 사파이어 위에 p-NiO 박막을 에피택셜하게 성장한 후 구조적 특성을 분석하였으며, n-ZnO 박막을 그 위에 성장하여 소자를 제작하였다. 그 결과 ZnO 또한 에피택셜한 성장을 하는 것을 확인할 수 있었다. 성장순서에 따른 PN 접합구조 특성을 확인하기 위해 사파이어 위에 ZnO 를 성장시킨 후 NiO 를 성장시킨 결과 NiO 박막의 우선성장 방향이 [100]으로 변하는 것을 확인할 수 있었다.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.10
no.6
/
pp.373-377
/
2000
For 6H-SiC single crystals which was obtained by sublimation growth (modified Lely process), the relation between the defects and the etch pits to be formed at the site of dislocations were discussed. Typical hexagonal etch pits were formed on (0001) basal plane. The similar hexagonal etch pit shapes were formed on the site of micropipe defects and it was realized that internal planar defects was formed with the same matrix crystal structure as grown crystals, through the observation of the etching morphology at those internal defects.
Rat $\beta$-casein 유전자와 사람 성장호르몬 (hGH) 유전자의 융합유전자를 생쥐 수정란의 웅성전핵에 미세주입하여 형질전환생쥐 (transgenic mouse) 6계통을 확립하였다. 이들로부터 사람성장호르몬(hGH) 유전자의 발현 여부를 조사한 결과, 6계통중 4계통의 생쥐 유즙에서 hGH가 2~900 ng/ml 수준으로 발현되고 있었으며, 혈중에서는 hGH가 검출되지 않았다. 따라서 이들 형질전환생쥐에서 사람성장호르몬이 우선특이적으로 발현, 분비되고 있음을 알 수 있었다. 한편, 사람성장호르몬의 발현이 확인된 두 계통 (ChGH2-2, CChGH2)의 형질전환생쥐를 대상으로 하여 세대별, 산차별로 유즙내 사람성장호르몬의 함량을 조사한 결과, 3세대에 걸쳐, 또한 제1세대에서의 세차례 반복된 비유기에도 유즙내 사람성장호르몬은 지속적으로 분비되고 있었다. 이상의 결과는 형질전환생쥐에서의 외래유전자의 발현성은 반복되는 비유기와 여러 세대에 걸쳐 안정적으로 유지됨을 보여 주고 있다.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.24
no.2
/
pp.54-58
/
2014
AlN (Aluminum Nitride) crystals were grown by a PVT (Physical Vapor Transport) method and were characterized to phases on the growth temperature. The crystals phase and morphology were analyzed using an optical stereo-microscope and the optimum temperature for the growing was determined. In this report, the characteristics of the AlN crystals grown at various temperatures were reported.
Shin, Ho Yong;Hong, Su Min;Yoon, Jong Won;Jeong, Dae Yong;Im, Jong In
Journal of the Korean Crystal Growth and Crystal Technology
/
v.23
no.6
/
pp.272-278
/
2013
In this study, a c-axis displacement and an internal stress of the sapphire crystal of 300 mm length have been analyzed numerically and the crystal length having no sub-grain defects have been predicted. The hot zone structures were modified with the crucible geometry change and the additional insulation layer installed above the crucible. The simulation results show that the c-axis displacement difference between the original hot zone and others originated from the sub-grain defect formations in the sapphire ingot. When the crystal grown by CZ (Czochralski) grower using the modified hot zone, the crystal length having no sub-grain defects was increased about 57 mm maximum than the original one. When the simulation results compared with the experimental one, the predicted crystal length having no sub-grain defects were well corresponded with the experiment one in c-axis wafer of the 300 mm sapphire ingot. Therefore the sapphire crystal of 250 mm length having no sub-grain defects was successfully grown by CZ process.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.9
no.3
/
pp.267-272
/
1999
Micro-defects in the undoped and MgO-doped $LiNbO_3$ single crystals, which were grown from a congruent melting composition (48.6 mol% $Li_2$O) by the CZ (Czochralski) method, were analyzed using microscopic techniques such as optical microscopy (OM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Effects of the dopant and g value (the fraction solidfied) on the domain structure and micro-defect were investigated to build a corelationship with a growth condition of crystal. It was observed that the micro-defect concentrated near the domain wall is caused by high stress. Especially, the micro-defect was observed to be biased toward a certain side of the domain wall.
Proceedings of the Korean Vacuum Society Conference
/
2010.08a
/
pp.154-155
/
2010
최근 Stranski-Krastanov (SK) 성장법을 이용한 자발형성 (Self-assembled) InAs/GaAs 양자점 (Quantum Dot) 연구가 기초 물리학뿐만 아니라 응용에 있어 활발하게 진행되고 있다. 그러나 기존 보고에 따르면 SK 성장법을 통한 InAs/GaAs 양자점은 크기, 균일도, 및 밀도 등의 성장거동 제어에 한계가 있다. 예로, 성장속도 및 증착양이 감소하더라도 상대적으로 크기가 큰 InAs/GaAs 클러스터 (Cluster)를 형성하여 크기분포의 불균일 및 결함을 야기하여 결과적으로 전기/광학적 특성을 저해하는 요인이 된다. 이를 개선하기 위한 방안으로 SK 성장법을 변형한 다양한 수정자발형성법이 제안되어 연구되고 있다. 본 논문에서는 기존 SK 성장법과 Arsenic-interruption Technique(AIT), In Pre-deposition (IPD)법을 각각 접목한 수정자발형성법을 이용하여 상대적으로 크기가 큰 InAs/GaAs 양자점 또는 클러스터 형성을 감소시켜 공간적 크기 균일도 및 밀도를 제어한 결과를 보고한다. 성장된 InAs/GaAs 양자점 시료의 구조 및 광학적 특성을 원자력간현미경 (Artomic Force Microscopy, AFM)과 Photoluminescence (PL) 분광법을 이용하여 분석하였다. 기존 SK 성장법을 이용하여 형성한 기준시료의 AFM 이미지에서 InAs/GaAs 양자점과 클러스터의 공간밀도는 각각 6.4*1010/cm2와 1.4*109/cm2로 관찰되었다. 그러나, AIT를 이용한 양자점 시료의 경우 상대적으로 크기가 큰 InAs/GaAs 클러스터는 관찰되어지지 않았고, 양자점 밀도는 8.4*1010/cm2로 SK 양자점에 비하여 30% 정도 개선되었다. 또한, InAs/GaAs 클러스터를 제외한 공간 균일도는 SK-InAs/GaAs 양자점의 15.6%에 비하여 8%로 크게 개선된 결과를 얻었다. AIT 성장법을 이용한 InAs/GaAs 양자점에서 원자의 이동거리 (Migration Length)의 제어로 양자점의 형성특성이 개선된 것으로 설명할 수 있으며, Arsenic 차단 시간이 임계점 이상으로 길어지면 다시 InAs/GaAs 클러스터들이 형성되는 것을 관찰할 수 있었다. InAs/GaAs 양자점과 클러스터 형성 특성이 초기 표면 조건에 어떻게 영향을 받는지 분석하기 위해, InAs 양자점 성장 이전에 V족 물질 공급 없이 Indium의 공급시간을 1초(IPDT1S 시료), 2초 (IPDT2S 시료), 3초 (IPDT1S 시료)로 변화시키면서 증착하고 기존 SK 성장법으로 양자점을 성장하였다 (IPD성장법). 그 결과 IDP1S 양자점 시료의 공간밀도가 10*1010/cm2로 SK InAs/GaAs 양자점 시료에 비해 약 60% 정도 증가하였고, 클러스터도 관찰 할 수 없었다. 그러나 IPD 시간이 증가할수록 다시 InAs/GaAs 클러스터들이 형성되는 것을 관찰할 수 있었다. 이러한 결과는 InAs/GaAs 양자점 성장초기에 InAs 핵생성 사이트 (Nucleation site)의 크기 및 상태를 제어하는 것이 양자점의 밀도 및 균일도를 제어하는 중요한 요소임을 알 수 있다.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.5
no.1
/
pp.44-49
/
1995
Abstract The surface of 6H - SiC bulk crystal grown by sublimation process was investigated by optical microscope observation. Since, in the 6H crystal growing, the crystal had the habitual step growth attitude such that the lateral growth rate along the random a - axis orientation was higher than that along the c - axis of the growth direction, then many steps were developed. There were, also, many micropipes on the surface in the form of as-like large voids. However, they were differenciated with pores and cross- sectional shape of them were close to the circle. In this study, many micropipes, planar defects and the growth steps appeared on the grown crystal surface were investigated.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.