• 제목/요약/키워드: 결함 분석

Search Result 106,456, Processing Time 0.103 seconds

초음파 Immersion법을 이용한 복합내재 연소관의 결함 검출 기법 연구

  • 나성엽;임수용;이상호
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 1999.04a
    • /
    • pp.27-27
    • /
    • 1999
  • 본 연구에서는 초음파 Immersion법을 이용하여 복합재 연소관내에 존재하는 결함을 검출하는 방법에 대하여 연구하였으며, 이를 위하여 FRP의 delamination, FRP-EPDM간의 미접착을 모사한 모의 결함 시편을 제작하여 시험하였다. 먼저 복합재료에 대한 초음파 시험방법을 최적화하기 위하여 가장 검출 감도가 좋은 탐촉자의 적용 주파수조건 및 물거리를 구하였으며, 이들 최적 조건으로 모의 결함 시편을 A, B, C-Scan하여 결함을 검출 분석하였다. 그리고 시험 자료를 바탕으로 데이터 값을 분석함으로써 복합재료에서의 음파 속도, 음향 임피던스, 반사율 및 투과율 등 복합재료의 초음파 특성을 산출하였으며, 동 시편에 대한 X-ray 필름을 촬영하여 그 결과를 초음파 시험 결과와 비교 분석하였다.

  • PDF

Integration of Image Regions and Product Components Information to Support Fault (조립체 결함 분석 지원을 위한 영상 영역과 부품 정보의 병합 ^x Integration of Image Regions and Product Components Information to Support Fault)

  • Kim, Sun-Hee;Kim, Kyoung-Yun;Lee, Hyung-Jae;Kwon, Oh-Byung;Yang, Hyung-Jeong
    • The Journal of the Korea Contents Association
    • /
    • v.6 no.11
    • /
    • pp.266-275
    • /
    • 2006
  • Mostly mechanical products are connected by several components instead of single accessory in product process. Although majority of assembly process is automated, the fault analysis is not automated because it needs expert knowledge in various fields to support inclusive decision-marking. This paper proposes an assembly fault analysis support system that uses image regions which can be easily accessed and understood by experts of various fields. An assembly fault analysis support system helps effective fault analysis from assembly by integrating image regions, product design information, and fault detection information. The proposed method enables fault information access from multimedia information by segmenting product images. After product images are segmented by labeling, design information and fault information are integrated in extended Attributed Relational Graph.

  • PDF

X-ray Rocking Curve Analysis of Post-Annealed 3 MeV P+ Implanted Silicon (3MeV P+ 이온주입된 실리콘의 열처리에 따른 X-ray Rocking Curve 분석)

  • 조남훈;장기완;김창수;이정용;노재상
    • Journal of the Korean Vacuum Society
    • /
    • v.4 no.1
    • /
    • pp.109-117
    • /
    • 1995
  • 고에너지 이온주입시 격자결함의 생성 및 열처리 거동이 double crystal X-ray와 단면 TEM을 사용하여 연구되었다. 3MeV P+ 이온주입한 실리콘의 DCXRD 분석 결과조사량 증가에 따라 모재 내의 변형량은 증가하였다. HRTEM 분석 결과 고에너지 이온주입시 결함은 표면 부근에 희박하고 Rp 부근에 집중되어 있었다. 또한 이온주입 상태의 결함층은 dark band의 형태로 존재하였으며 열처리시 이차결함은 이곳으로부터 생성됨이 관찰되었다. 3MeV P+,$1X1015extrm{cm}^2$의 조건으로 이온주입된 실리콘 시편의 열처리에 따른 X-ray rocking curve 분석을 통하여 열처리 온도가 $550^{\circ}C$에서 $700^{\circ}C$로 증가함에 따라 모재 내부의 최대 변형량이 7X10-4에서 2.9X10-4으로 감소함이 관찰되었다. 특히 $550^{\circ}C$ 열처리한 시편의 경우 표면으로부터$-1.5mu$m 영역에 작은 변형층이 넓게 잔존하였으며 열처리온도를 $700^{\circ}C$로 증가한 경우 제거되었다. 이온주입시 생성된 일차결함들은 $700^{\circ}C$ 열처리시 $60^{\circ}$ 전위와 <112> 막대 모양 결함, $1000^{\circ}C$ 열처리시 <110>방향의 전위루프로 열처리 조건에 따라 여러 가지 모양의 이차결함으로 변화하였다. 고에너지 이온주입에 의해 발생한 이차결함은 고온에서도 안정하여 고온 열처리에 의한 제거가 용이하지 않았다.

  • PDF

A Case Study on Job Analysis Utilizing Cluster Analysis and Community Analysis (군집분석 및 커뮤니티 분석 기법을 활용한 직무분석 사례 연구)

  • Jo, Il-Hyun
    • The Journal of Korean Association of Computer Education
    • /
    • v.7 no.1
    • /
    • pp.151-165
    • /
    • 2004
  • The purpose of the study was to explore the potential of the Cluster Analysis and the Community Analysis of Social Network Analyses family in job-task analysis for curriculum design. These two multivariate analysis techniques were expected to bring us relevant and scientific information as well as inspiration in investigating the structure and nature of job system, which are critical in developing relevant curriculum. To pursue the purpose mentioned above, qualitative and quantitative data were collected from "S" Corporate, a major large high-tech manufacturing company, and analyzed by relevant analytic procedures. Results indicate that there are discrepancies between formal job structures and actual ones. Following Community analysis showed that the presence of center-marginal structure along with clustering structure in the current job formation. Interpretations of the results of the study are provided in light of past research and additional data collected from the study. Implications of the study are also discussed along with suggestions for future research.

  • PDF

Evaluation of eutrophication characteristics of major lakes in the Seomjin River (섬진강 주요호수의 부영양화 특성 평가)

  • Lee, Bo Ram;Park, Soo Ho;Park, Sung Chun;Lee, Woo Bum
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2022.05a
    • /
    • pp.479-479
    • /
    • 2022
  • 섬진강 주요호수 4개 호수에 대하여 20년간의 수질자료를 수집하여 한국형 부영양화지수(TSIko)를 산정하고 부영양화정도와 경향성을 분석하였다. 호수별 20년간 평균 수질농도 분석 결과, 4개 호수 중 BOD, COD, T-P, Chl-a, TOC의 5개 항목에서 보성호가 가장 높은 농도를 보이고, T-N도 두 번째로 높은 농도를 나타냈으며, 월별·계절별 분석 결과, 전체 수질항목의 수질은 대체적으로 여름(6-8월)에 가장 높았으나, 동복호의 Chl-a 항목의 경우 봄(3-5월)과 가을(9-11월)에 가장 높았다. 호소별 수질자료를 통한 경향분석 결과, 옥정호(섬진강호)는 BOD, TOC, 주암호는 COD, TOC, 보성호는 COD, TOC, Chl-a, 동복호는 TOC 항목이 증가하는 경향을 보이며, 주로 유기물 항목들이 증가하는 경향을 나타내었고, 각 호소의 수질항목별 상관관계 분석 결과, 보성호의 COD와 TOC 항목 사이의 상관계수가 0.85로 높은 상관관계를 나타냈고, 그 외에는 보통 또는 약한 상관관계 또는 상관관계가 거의 없는 것으로 나타났다. 최근 20년간의 연도별, 월별, 계절별 수질자료를 바탕으로 섬진강 내 주요호수 4개 호수의TSIko 평가 결과, 대부분의 호수가 중영양 상태를 나타내었고, 보성호의 경우, 2001년, 2004년, 2005년, 2015년~2020년에 각각 부영양화지수가 51.31, 56.94, 54.59, 52.77, 51.08, 57.95, 58.10, 50.82, 50.77로 부영양 상태로 평가되었다. 특히 보성호의 경우, TSIko 결과를 기반으로 한 경향분석 결과, 경향성이 없거나 감소하는 다른 호수들과는 달리 증가하는 경향성을 보이고, 항목별 경향성 분석 결과 COD, TOC, Chl-a이 증가하는 경향으로 나타났으며, 유기물인 COD와 TOC 항목의 경우 높은 상관관계를 보이고 있으므로, 추후 섬진강 유역의 물 수요 문제 해소에 대한 중요한 수자원에 대한 모니터링 및 부영양화 해소와 수질개선방안에 대한 연구가 필요할 것으로 판단된다.

  • PDF

Competition and deconcentration of logistics companies in Vietnam focusing on domestic freight forwarders (베트남 물류기업의 경쟁 및 탈 집중화: 베트남 포워더를 중심으로)

  • Dang, Thi Trang;Yeo, Gi-Tae
    • Journal of Digital Convergence
    • /
    • v.18 no.6
    • /
    • pp.33-44
    • /
    • 2020
  • The main objective of this study is to measure the concentration and deconcentration of the domestic freight forwarding system which illustrate the development trends in this industry. In this study, Herfindal-Hirschman index (HHI), shift-share analysis (SSA), and GINI coefficient combined with Lorenz curves were employed to investigate the domestic freight forwarders. The results are as follows: first, the HHI was used to assess the concentration of domestic freight forwarders in Vietnam. The downward trend from 0.117 in 2008 to 0.083 in 2018 indicate the deconcentration of domestic freight forwarders in Vietnam. Second, the SSA results indicated that the company Transimex showed the best performance with a shift effect of million VND 1,906,515 and a ABSGR value of million VND 2,158,232. Third, the GINI index go down from 0.468 to 0.393 in 2008-2018 as follow and the Lorenz curves covered a large part which make more demonstrate the deconcentration trend of freight forwarding in Vietnam. The results show that deconcentration is a trend in 2008-2018. The results of this study provides relevant data on freight forwarders which are not easily accessible to related stakeholders.

Graphical Presentation Model for Static Analysis of Software (소프트웨어 정적 분석의 가시적 표현 모델)

  • Song, Seung-Hwa;Kim, Yun-Kwan;Chang, Chun-Hyon
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2007.06b
    • /
    • pp.117-122
    • /
    • 2007
  • 오늘날 소프트웨어의 설계 및 개발과 관련된 연구들은 많은 발전을 이루고, UML과 같은 의사소통을 위한 표준 언어가 만들어졌으며 많은 사람들이 관련 이론을 수용 및 활용하고 있다. 또한, 개발 프로세스에서의 설계 및 구현과 더불어 소프트웨어의 유지 보수 단계는 매우 중요하며 이러한 소프트웨어의 유지 보수를 위한 소프트웨어 검증에 관련된 연구는 근래에 많은 주목을 받고 있다. 하지만 소프트웨어 검증의 기술 개발 수준은 설계 및 개발에 비하여 많이 미흡한 실정이다. 소프트웨어 검증은 주로 검증하기 위한 입력 데이터를 산출하여 프로그램 실행을 통해 결과를 확인하는 동적 분석에 대한 연구가 주를 이룬다. 이러한 동적 분석은 원하는 산출물의 확인을 주목적으로 하며, 결과를 표현하는 데에는 따로 정형화된 형식이 필요 없다. 하지만 소스코드를 분석하여 소프트웨어의 구조 관계와 흐름을 파악하는 정적 분석은 분석 자료를 표현하는 표현 모델이 중요하다. 현재는 정적 분석의 결과를 표현하기 위한 공통의 표현 모델이 없기 때문에 검증 과정에서의 의사소통에서 의견의 불일치의 가능성이 있고, 설계 단계에서 사용되는 표현 모델로는 정적 분석 정보의 모든 내용을 표현하는데 한계가 있다. 따라서 본 논문에서는 소프트웨어의 정적 분석 과정을 분석 4계층으로 구분하고, 각 계층마다 분석 결과를 나타내기 위한 표현 모델을 제시한다. 그리고 이 표현 모델을 활용한 소프트웨어 분석 도구의 개발을 위해, 소스 분석 데이터를 가시적으로 표현하기 위한 자료구조의 설계에 대한 내용을 다룬다.

  • PDF

Simulation Modeling of Profit Optimization and Output Analysis using R (R을 활용한 이윤 최적화 시뮬레이션 모델링 및 결과 분석)

  • Cho, Min-Ho;Jeon, Yong-Ho
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.9 no.8
    • /
    • pp.883-888
    • /
    • 2014
  • Simulation is now using in various area as an effective decision analysis tool in complex environment of today. But, There is a focus to the simulation model development and execution better than result analysis. This article will emphasis to the importance of result analysis apart from model development in simulation, and will use R package for profit optimization simulation. R has a various function in statistic analysis and data manipulation, graphic display. So this research can show the value of R as a tool for simulation.

Proposal of UI Test Automatic Design Model Through Web Log Analysis (웹로그 분석을 통한 UI테스트 자동화 설계 모델 제안)

  • Choi, Ji-Hoon;Kim, Jae-Woong;Lee, Youn-Yeoul;Park, Seong-Hyun
    • Proceedings of the Korean Society of Computer Information Conference
    • /
    • 2021.07a
    • /
    • pp.249-251
    • /
    • 2021
  • 본 논문에서는 WEB대상으로 UI테스트를 최초 설계할 때, 웹로그를 분석하여 사용자들의 패턴을 파악하고 자동으로 테스트 시나리오와 케이스를 설계하여 제공하는 시스템을 제안한다. 이 시스템은 메세지큐를 활용하여 로그 데이터를 효율적으로 수집할 수 있고, 분석 시스템과 사용자들이 사용하는 웹서버를 분리하여 로그분석으로 인한 시스템 과부하 현상을 예방 할 수 있다. 또한 로그분석을 통해 추출된 데이터를 통해 사용자들이 실제로 자주 사용하거나 사용했던 사용 경로를 이용하여 자동으로 테스트 시나리오와 테스트 케이스에 대한 자료들을 접할 수 있어 테스트 분석, 설계 과정에서의 소요되는 시간이 감축되는 것을 기대할 수 있으며, 실제 사용자들이 자주 이용하는 패턴으로 테스트 대상을 정할 수 있기 때문에 후에 테스트를 통한 결함이 조치가 된다면 사용자들이 결함 경험을 줄일 수 있을 것이라 기대한다.

  • PDF

A Analysis Pattern of Defect with SW Quality Characteristics (SW 품질 특성 별 결함 유형 분석)

  • Lee, Sang-Bok;Chung, Chang-Shin;Shin, Seok-Kyoo
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2005.11a
    • /
    • pp.365-368
    • /
    • 2005
  • 최근 소프트웨어 산업에서 소프트웨어 품질이 화두가 되고 있으며 소프트웨어 제품 개발 시 소프트웨어 품질 및 시험 개념을 적용하지 않으면 소프트웨어 시장에서 외면될 가망성이 높아지고 있다. 그로 인해 TTA SW 시험인증 센터에서 소프트웨어 품질을 높이기 위해 GS 시험인증을 서비스 하고 있다. 소프트웨어 시험을 통한 결함 분석을 통해 소프트웨어 제품 개발 시 개발 프로세스에 반영하고 개발자가 소프트웨어 제품을 구현 시 결함에 대한 분석정보를 활용할 수 있도록 소프트웨어 품질특성 중 결함이 많이 발생하는 부분에 결함 유형을 정의하고 사전에 방지할 수 있는 해결방법을 제시한다.

  • PDF