• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.173-185
• /
• 1999

The purpose of this study is to develope a forecasting model to implement short-term Congestion Management Program (CMP) based on TDM strategies in Seoul. The CMP is composed of three elements: 1) setting a goal of short-term traffic management. 2) developing a model to forecast the impacts of TDM alternatives, and 3) finding TDM measures to achieve the goal To Predict the impacts of TDM alternatives, a model called SECOMM (SEoul COngestion Management Model) is developed. The model assumes that trip generation and distribution are not changing in a short term, and that only mode split and traffic assignment are affected by TDM. The model includes the parameter values calibrated by a discrete mode choice model, and roadway and transit networks with 1,020 zones. As a TDM measure implement, it affects mode choice behavior first and then the speeds of roadway network. The chanced speed again affects the mode choice behavior and the roadway speeds. These steps continue until the network is equilibrated. The study recommends that CMP be introduced in Seoul, and that road way conditions be monitored regularly to secure the prediction accuracy of SECOMM. Also, TDM should be the major Policy tools in removing short-term congestion problems in a big city.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.53-59
• /
• 2021

The marine transport industry generally applies new technologies later than other transport industries, such as airways and railways. Vessels require efficient operation, and their performance and lifespan depend on the level of maintenance and management. Many studies have shown that corrective maintenance (CM) and time-based maintenance (TBM) have restrictions with respect to enabling efficient maintenance of workload and cost to improve operational efficiency. Predictive maintenance (PdM) is an advanced technology that allows monitoring the condition and performance of a target machine to predict its time of failure and helps maintain the key machinery in optimal working conditions at all times. This study presents the development of a marine predictive maintenance (MPdM; maritime predictive maintenance) method based on applying PdM to the marine environment. The MPdM scheme is designed by considering the special environment of the marine transport industry and the extreme marine conditions. Further, results of the study elaborates upon the concept of MPdM and its necessity to advancing marine transportation in the future.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.137-145
• /
• 2006

Recently, the interests in structural monitoring of civil infrastructures are increased. Especially, as the civil infrastructures such as bridges, tunnels and buildings become large-scale, it is necessary to monitor and maintain the safety state of the structures, which requires smart systems that can supply long-term monitoring during the service time of the structures. In this paper, we investigated the possibilities of fiber optic sensor application to the various structures. We investigate the possibility of using fiber optic Bragg grating sensors to joint structure. The sensors show good response to the structural behavior of the joint while electric gauges lack of sensitivity, durability and long term stability for continuous monitoring. We also apply fiber optic structural monitoring to the composite repaired concrete beam structure. Peel-out effects is detected with optical fiber Bragg grating sensors and the strain difference between main structure and repaired carbon sheets is observed when they separate each other. The real field test was performed to verify the behaviors of fiber Bragg grating sensors attached to the containment structure in Uljin nuclear power plant in Korea as a part of structural integrity test which demonstrates that the structural response of the non-prototype primary containment structures. The optical fiber Bragg grating sensor smart system which is the probable means for long term assessments can be applicable to monitoring of structural members in various civil infrastructures.

• Journal of the Korean Magnetics Society
• /
• v.26 no.2
• /
• pp.39-44
• /
• 2016

Determination of the structural, electronic, and magnetic properties of the magnetically doped bismuth-telluride alloys are drawing lots of interest in the fields of the thermoelectric application as well as the research on magnetic interaction and topological insulator. In this study, we performed the first-principles electronic structure calculations within the density functional theory for the Gd doped bismuth-tellurides in order to study its magnetic properties and magnetic phase stability. All-electron FLAPW (full-potential linearized augmented plane-wave) method is employed and the exchange correlation potentials of electrons are treated within the generalized gradient approximation. In order to describe the localized f-electrons of Gd properly, the Hubbard +U term and the spin-orbit coupling of the valence electrons are included in the second variational way. The results show that while the Gd bulk prefers a ferromagnetic phase, the total energy differences between the ferromagnetic and the antiferromagnetic phases of the Gd doped bismuth-telluride alloys are about ~1meV/Gd, indicating that the stable magnetic phase may be changed sensitively depending on the structural change such as defects or strains.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.44-51
• /
• 2016

The powder core, conventionally fabricated from iron particles coated with insulator, showed large eddy current loss under high frequency, because of small specific resistance. To overcome the eddy current loss, the increase in the specific resistance of powder cores was needed. In this study, copper oxide coating onto electrically conductive iron particles was performed using a planetary ball mill to increase the specific resistance. Coating factors were optimized by the Response surface methodology. The independent variables were the CuO mass fraction, mill revolution number, coating time, ball size, ball mass and sample mass. The response variable was the specific resistance. The optimization of six factors by the fractional factorial design indicated that CuO mass fraction, mill revolution number, and coating time were the key factors. The levels of these three factors were selected by the three-factors full factorial design and steepest ascent method. The steepest ascent method was used to approach the optimum range for maximum specific resistance. The Box-Behnken design was finally used to analyze the response surfaces of the screened factors for further optimization. The results of the Box-Behnken design showed that the CuO mass fraction and mill revolution number were the main factors affecting the efficiency of coating process. As the CuO mass fraction increased, the specific resistance increased. In contrast, the specific resistance increased with decreasing mill revolution number. The process optimization results revealed a high agreement between the experimental and the predicted data ($Adj-R^2=0.944$). The optimized CuO mass fraction, mill revolution number, and coating time were 0.4, 200 rpm, and 15 min, respectively. The measured value of the specific resistance of the coated pellet under the optimized conditions of the maximum specific resistance was $530k{\Omega}{\cdot}cm$.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.1 s.4
• /
• pp.45-52
• /
• 2004

There are many cities installing ITS(Intelligent Transportation Systems) and running TMC(Trafnc Management Center) to improve mobility and safety of roadway transportation by providing roadway information to drivers. There are many devices in ITS which collect real-time traffic data. We can obtain many valuable traffic data from the devices. But it's impossible to avoid missing traffic data for many reasons such as roadway condition, adversary weather, communication shutdown and problems of the devices itself. We couldn't do any secondary process such as travel time forecasting and other transportation related research due to the missing data. If we use the traffic data to produce AADT and DHV, essential data in roadway planning and design, We might get skewed data that could make big loss. Therefore, He study have explored some imputation techniques such as heuristic methods, regression model, EM algorithm and time-series analysis for the missing traffic volume data using some evaluating indices such as MAPE, RMSE, and Inequality coefficient. We could get the best result from time-series model generating 5.0$\%$, 0.03 and 110 as MAPE, Inequality coefficient and RMSE, respectively. Other techniques produce a little different results, but the results were very encouraging.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.511-520
• /
• 2007

There is a concern with worldwide deterioration of highway bridges, particularly reinforced concrete. The advantages of fibre reinforced plastic(FRP) composites over conventional materials motivate their use in highway bridges for replacement of structures. Recently, an FRP deck has been installed on a state highway, located in New York State, as an experimental project. In this paper, a systematic approach for analysis of this FRP deck bridge is presented. Multi-step linear numerical analyses have been performed using the finite element method to study the structural behavior and the possible failure mechanism of the FRP deck-superstructure system. Deck's self-weight and ply orientations at the interface between steel girders and FRP deck are considered in this study. From this research, the results of the numerical analyses were corroborated with field test results. Analytical results reveal several potential failure mechanism for the FRP deck and truss bridge system. The results presented in this study may be used to propose engineering design guideline for new and replacement FRP bridge deck structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.669-678
• /
• 2018

This study developed information technology infrastructures for building a driving environment analysis platform using various big data, such as vehicle sensing data, public data, etc. First, a small platform server with a parallel structure for big data distribution processing was developed with H/W technology. Next, programs for big data collection/storage, processing/analysis, and information visualization were developed with S/W technology. The collection S/W was developed as a collection interface using Kafka, Flume, and Sqoop. The storage S/W was developed to be divided into a Hadoop distributed file system and Cassandra DB according to the utilization of data. Processing S/W was developed for spatial unit matching and time interval interpolation/aggregation of the collected data by applying the grid index method. An analysis S/W was developed as an analytical tool based on the Zeppelin notebook for the application and evaluation of a development algorithm. Finally, Information Visualization S/W was developed as a Web GIS engine program for providing various driving environment information and visualization. As a result of the performance evaluation, the number of executors, the optimal memory capacity, and number of cores for the development server were derived, and the computation performance was superior to that of the other cloud computing.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.3
• /
• pp.289-297
• /
• 2013

In this study, the local buckling behavior of steel built-up columns, fabricated with grade 800MPa high performance (HSA800), was investigated to verify the suitability of width-to-thickness ratio limits adopted by the current design code. For this purpose, an experimental program was designed and performed for HSA800 steel column specimens with various width-to-thickness ratios. Then the experimental results were compared and verified with finite element analysis results. The parametric analytical studies with various width-to-thickness ratios were also performed to investigate the missing data from the limited experimental studies. From the experimental and analytical studies, It was found that the finite analysis models could reasonably estimate the test results within the 5.3% average differences. The local buckling behaviors of HSA800 steel columns were found to be largely depend on the values of initial imperfection introduced into finite element analyses.

• Korean Journal of Microbiology
• /
• v.48 no.2
• /
• pp.66-72
• /
• 2012

The Nup188 protein is one of the largest evolutionally conserved nucleoprins (Nups) that compose the inner ring of nuclear pore complex (NPC). The Nup184 protein, fission yeast Schizosaccharomyces pombe ortholog of Nup188p, is required for normal growth and mRNA export in nutrient-rich medium (YES). Here, we identified a carboxyl region (482 to 1628) of Nup184 protein that was enough to complement the defects of both growth and mRNA export when the ${\Delta}nup184$ knock-out mutant was grown in YES medium. This region is also required for localization of GFP-Nup184 fusion to the nuclear periphery. In addition, we found that ORF of Nup184 (predicted 1564 amino-acid protein) registered in S. pombe GeneDB (hosted by Sanger Institute, UK) is 64 amino-acid residues shorter than that predicted by our sequence data. This carboxy-terminal region is necessary for the functions of Nup184p. We further demonstrated that Nup184 protein was conjugated with SUMO in vivo.