• Title/Summary/Keyword: 결정적 자원 모델

Search Result 272, Processing Time 0.029 seconds

Cesium Sorption to Granite in An Anoxic Environment (무산소 환경에서의 화강암에 대한 세슘 수착 특성 연구)

  • Cho, Subin;Kwon, Kideok D.;Hyun, Sung Pil
    • Korean Journal of Mineralogy and Petrology
    • /
    • v.35 no.2
    • /
    • pp.101-109
    • /
    • 2022
  • The mobility and transport of radioactive cesium are crucial factors to consider for the safety assessment of high-level radioactive waste disposal sites in granite. The retardation of radionuclides in the fractured crystalline rock is mainly controlled by the hydrochemical condition of groundwater and surface reactions with minerals present in the fractures. This paper reports the experimental results of cesium sorption to the Wonju Granite, a typical Mesozoic granite in Korea, performed in an anaerobic chamber that mimics the anoxic environment of a deep disposal site. We measured the rates and amounts of cesium (133Cs) removed by crushed granite samples in different electrolyte (NaCl, KCl, and CaCl2) solutions and a synthetic groundwater solution, with variations in the initial cesium concentration (10-5, 5×10-6, 10-6, 5×10-7 M). The cesium sorption kinetic and isotherm data were successfully simulated by the pseudo-second-order kinetic model (r2= 0.99) and the Freundlich isotherm model (r2= 0.99), respectively. The sorption distribution coefficient of granite increased almost linearly with increasing biotite content in granite samples, indicating that biotite is an effective cesium scavenger. The cesium removal was minimal in KCl solution compared to that in NaCl or CaCl2 solution, regardless of the ionic strength and initial cesium concentration that we examined, showing that K+ is the most competitive ion against cesium in sorption to granite. Because it is the main source mineral of K+ in fracture fluids, biotite may also hinder the sorption of cesium, which warrants further research.

Development of a Comprehensive Model of Disaster Management in Korea Based on the Result of Response to Sampung Building Collapse (1995), - Disaster Law, and 98 Disaster Preparedness Plan of Seoul City - (우리나라 사고예방과 재난관리 모형 개발을 위한 연구)

  • Lee, In-Sook
    • Research in Community and Public Health Nursing
    • /
    • v.11 no.1
    • /
    • pp.289-316
    • /
    • 2000
  • 우리나라의 경우 지역사회 재난 관리계획과 훈련이 보건의료적 모형이라기 보다는 민방위 모형에 입각하기 때문에 사고 현장에서의 환자 중증도 분류, 합리적 환자배분 및 이송, 병원 응급실에서의 대처 등이 체계적으로 이루어지지 못하고 있으며, 지역사회가 이에 즉각적으로 반응할 수 없다. 본 연구는 삼풍 붕괴사고 시에 대응방식과 그 후의 우리나라 응급의료 체계를 분석함으로써 대형사고 예방과 재난관리를 위한 우리나라 응급의료체계의 개선방안과 간호교육에서의 준비부분을 제시하고자 한다. 1 삼풍 사고 발생시에는 이를 관장할 만한 법적 근거인 인위적 재해에 관한 재난관리법이 없었다. 따라서 현장에서는 의학적 명령체계를 확보하지 못했기 때문에 현장에서의 응급 처치는 전혀 이루어지지 못하였다. 현장에서의 중증도 분류. 응급조치와 의뢰, 병원과 현장본부 그리고 구급차간의 통신 체계 두절, 환자 운송 중 의료지시를 받을 수 있도록 인력, 장비, 통신 체계가 준비되지 못하였던 점이 주요한 문제였다. 또한 병원 응급실에서는 재난 계획이 없거나 있었더라도 이를 활성화하여 병원의 운영 체계를 변환해가지 못하였다. 2. 삼풍백화점 붕괴사고 한달 후에는 인위적 재해에 대한 재난관리법이 제정되고, 행정부 수준별로 매년 지역요구에 합당한 재난관리 계획을 세우도록 법으로 규정하였다. 재난 관리법에는 보건의료 측면에서의 현장대응, 주민 참여, 응급 의료적 대처, 정보의 배된. 교육/훈련 등이 포함되어 있어야 한다. 그러나 법적 기반이 마련된 이후에도 한국 재난 계획 내에는 응급의료 측면의 대응 영역은 부처간 역할의 명시가 미흡하며, 현장에서의 응급 대응과정을 수행할 수 있는 운영 지침이 없이 명목상 언급으로 그치고 있기 때문에 계획을 활성화시켜 지역사회에서 운영하기는 어렵다. 즉 이 내용 속에는 사고의 확인 /공고, 응급 사고 지령, 요구 평가, 사상자의 중증도 분류와 안정화, 사상자 수집, 현장 처치 생명보존과 내과 외과적 응급처치가 수반된 이송, 사고 후 정신적 스트레스 관리, 사고의 총괄적 평가 부분에 대한 인력간 부처간 역할과 업무가 분명히 제시되어 있지 못하여, 사고 발생시 가장 중요한 연계적 업무 처리나 부문간 협조를 하기 어렵다. 의료 기관과 응급실/중환자실, 시민 안전을 책임지고 있는 기관들과의 상호 협력의 연계는 부족하다. 즉 현재의 재난 대비 계획 속에는 부처별 분명한 업무 분장, 재난 상황에 따른 시나리오적 대비 계획과 이를 훈련할 틀을 확보하고 있지 못하다. 3. 지방 정부 수준의 재난 계획서에는 재난 발생시 보건의료에 관한 사항 전반을 공공 보건소가 핵심적 역할을 하며 재난 관리에 대처해야 된다고 규정하고 있다. 그러므로 보건소는 지역사회 중심의 재난 관리 계획을 구성하고 이를 운영하며, 재난 현장에서의 응급 치료 대응 과정은 구조/ 구명을 책임지고 있는 공공기관인 소방서와 지역의 응급의료병원에게 위임한다. 즉 지역사회 재난 관리 계획이 보건소 주도하에 관내 병원과 관련기관(소방서. 경찰서)이 협동하여 만들고 업무를 명확히 분담하여 연계방안을 만든다. 이는 재난관리 대처에 성공여부를 결정하는 주요 요인이다. 4 대한 적십자사의 지역사회 주민에 대한 교육 프로그램은 연중 열리고 있다. 그러나 대부분의 교육주제는 건강증진 영역이며. 응급의료 관리는 전체 교육시간의 8%를 차지하며 이중 재난 준비를 위한 주민 교육 프로그램은 없다. 또한 특정 연령층이 모여있는 학교의 경우도 정규 보건교육 시간이 없기 때문에 생명구조나 응급처치를 체계적으로 배우고 연습할 기회가 없으면서 국민의 재난 준비의 기반확대가 되고 있지 못하다. 5. 병원은 재난 관리 위원회를 군성하여 병원의 진료권역 내에 있는 여러 자원을 감안한 포괄적인 재난관리계획을 세우고, 지역사회를 포함한 훈련을 해야 한다. 그러나 현재 병원은 명목상의 재난 관리 계획을 갖고 있을 뿐이다. 6. 재난관리 준비도를 평가할 때 병원응급실 치료 팀의 인력과 장비 등은 비교적 기준을 충족시키고 있었으나 병원의 재난 관리 계획은 전혀 훈련되고 있지 못하였다 그러므로 우리나라 재난 관리의 준비를 위해서는 현장의 응급의료체계, 재난 대응 계획, 이의 훈련을 통한 주민교육이 선행되어야만 개선될 수 있다. 즉 민방위 훈련 모델이 아닌 응급의료 서비스 모델에 입각한 장기적 노력과 재원의 투입이 필요하며, 지역사회를 중심으로 대응 준비와 이의 활성화 전략 개발, 훈련과 연습. 교육에 노력을 부여해야 한다. 7. 현장의 1차 응급처치자에 대해서는 법적으로 명시하고 있는 역할이 없다. 한국에서는 응급구조사 1급과 2급에 대한 교육과 규정을 1995년 이후 응급의료에 관한 법률에서 정하고 있다. 이 교육과정은 미국이 정하고 있는 응급구조사 과정 기준과 유사하지만 실습실이나 현장에서의 실습시간이 절대적으로 부족하다. 덧붙여 승인된 응급구조사 교육 기관의 강사는 강사로서의 자격기준을 충족할 뿐 아니라 실습강사는 대체적으로 1주일의 1/2은 응급 구조차를 탑승하여 현장 활동을 끊임없이 하고 있으며, 실습은 시나리오 유형으로 진행된다. 그러므로 우리나라의 경우 응급 구조사가 현장 기술 인력으로 역할 할 수 있도록 교과과정 내에서 실습을 강화 시켜야하며, 졸업생은 인턴쉽을 통한 현장 능력을 배양시키는 것이 필요하다. 8. 간호사의 경우 응급전문간호사의 자격을 부여받게 됨에 따라, 이를 위한 표준 교육 지침을 개발함으로써 병원 전 처치와 재난시 대응할 수 있는 역량을 보완해야 한다. 또한 현 자격 부여 프로그램 내용을 고려하여 정규자격 간호사가 현장 1차 치료자(first responder)로 역할 할 수 있도록 간호학 교과과정을 부분 보완해야한다.

  • PDF

A Study on the Ecological Indices for the Assessment of the Function and Maturity of Artificial Reefs (인공어초의 기능도와 성숙도 평가를 위한 생태학적 지수에 대한 연구)

  • Yoo, Jae-Won;Hong, Hyun-Pyo;Hwang, Jae-Youn;Lee, Min-Soo;Lee, Yong-Woo;Lee, Chae-Sung;Hwang, Sun-Do
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.19 no.1
    • /
    • pp.8-34
    • /
    • 2014
  • We reviewed foreign evaluation systems based on the macrobenthic and macroalgal communities and developed a system, composed of a set of ecological indices able to evaluate the functionality (FI, Functional Index; estimation of stability and productivity) and maturity (MI, Maturity Index; comparisons with biological parameters of natural reefs) of artificial reefs by comparing the status in the adjacent natural reefs in Korean coastal waters. The evaluation system was applied to natural and artificial reefs/reef-planned areas (natural reefs), established in the 5 marine ranching areas (Bangnyeong-Daechung, Yeonpyung, Taean, Seocheon and Buan) in the west coast of Korea. The FI ranged between 31.6 (Bangnyeong-Daechung) and 72.5% (Buan) and MI did between 53.1 (Seocheon) and 76.9% (Taean) in average. The evaluation of artificial reefs by the two indices, showed the most appropriate status in Taean. The FI between the adjacent artificial and natural reefs were in significant linear relationship ($r^2=0.83$, p=0.01). This indicated the local status of biological community may be critical in determining the functionality of the artificial reefs. We have suggested an integrative but preliminary evaluation system of artificial reefs in this study. The output from the evaluation system may be utilized as a tool for environment/resource managers or policy makers, responsible for effective use of funds and decision making. Given the importance, we need to use the options to enhance and improve the accuracy as follows: (1) continuous validation of the evaluation system and rescaling the criteria of indicators, (2) vigorous utilization of observation and experience through the application and data accumulation and (3) development and testing of brand-new indicators.

외국 공공연구기관의 단설대학원 운영사례연구

  • 김정흠;김갑수;김전식;이규호;이병민;조붕제;현병환
    • Proceedings of the Korea Technology Innovation Society Conference
    • /
    • 1998.05a
    • /
    • pp.8-8
    • /
    • 1998
  • 한 국가의 경쟁력은 여러 가지 생산요소들의 질적·양적 우위에 의해 결정되나, 그 중에서도 특히 기술이 체화된 인적자원이 경쟁력 확보의 핵심요소임은 재론의 여지가 없다. 과거 우리나라 급성장의 주요 원동력이었던 우수하고 풍부한 인력이 이제 더 이상 우리 경쟁력의 원천이 되지 못하고 있다. 무한경쟁시대를 이끌어갈 창의력과 지도력을 갖춘 고급기술인력이 부족하고, 우수한 기술인력이 과학기술계를 회피하고 있으며, 산업현장에서 실제문제를 해결할 수 있는 실천적 전문기술과 숙련된 기능을 제대로 갖춘 인력을 배출하지 못하고 있다. 이러한 기숙인력 양성의 문제들을 해결하기 위한 방안의 하나로서 일반대학과 별도로 기술인력양성을 전문으로 하는 학위과정 설치의 필요성이 대두되었으며, 1996년 교육개혁의 일환으로 단설대학원제도와 전문학위제도가 시행되기 시작하였다. 그동안 여러 분야에서 단설대학원 설립이 추진되었으며, 일부에서 운영이 시작되고 있으나 과학기술분야에서는 극히 일부의 사례만이 있을 뿐이고 아직 본격적으로 설립운영되고 있다고 보기 어렵다. 본고는 외국 공공연구기관에서 시행되는 단설대학원의 사례들을 조사 분석함으로써 우리나라 과학기술계 출연연구기관에서의 바람직한 운영모델을 제시하고자한다. 일본의 총합연구대학원대학과 연계대학원제도, 중국 국가연구소들의 학위수여제도, 프랑스 국가연구소들의 석·박사과정, 독일 연구기관들의 박사과정 등을 소개하며, 이 들의 특징과 장단점들을 비교한다. 이어서 우리나라에서 현재 진행되고 있는 현황을 분석하고, 과학기술계 출연연구기관의 단설대학원 설립의 방향과 활성화를 위한 개선방안 등을 제시한다. 보고하였다2) 이 경우 보호피막으로서 NiO 와 $LiCrO_2$가 작용하는데, $LiCrO_2$가 용융탄산염 중에서 보다 안정한 것으로 부터, Cr의 첨가가 내식성에 기여하는 것으로 판단하였다. 다음 단계 로서 Fe/Cr재료에 용-융탄산염 중에서 안정한 산화물을 형성하는 Al의 첨가효과를 검토하였다. Al의 첨가는 더욱 내식성을 향상시키는 것이 발견되었고, 약 4wt%의 첨가로 충분한 내식성을 가지 는 것을 보고 하였다. 그러나 이러한 안정한 산화물에 의한 내식성 향상은 전기진도도의 희생을 바탕으로 한 것으로서, 다읍 단계로서 Ti산화물의 반도체적인 특성을 이용하고자 제 4의 원소로서 Ti첨가를 시도하였다. 그러나 Fe/Cr/AVTi재료가 뛰어난 내식성을 가지는 것은 관찰되었으나, 전도도 향상에는 기여하지 못하는 것이 보고되었다. 현재 MCFC는 실용화를 위한 고성능화의 하나로서 가압하에서의 운전을 시도하고 있다. 이 러한 가압하에서의 운전은 기전력의 향상 및 전극반응의 촉진 등으로 출력의 향상을 가져오나. 현재 문제로 되고 있는 Cathode극인 NiO의 용해/석출 현상을 가속화하는 결과를 초래해, 이에대 한 대책으로서 Li-K보다 NiO의 용해가 적은 Li-Na탄산염으로의 전환이 진행되고 있다. 이러한 배경으로부터 Uchida그룹에서 개발한 FeiCr/AVTi재료와 현재 분리판 재료로 사용증인 SUS 310, S SUS 316재료에 대해. 산화성 분위기의 5기압까지의 가압하에서, Li-K, Li-Na탄산염에 대하여 부 식거동을 검토한 결과, 가압하에서 내식성이 향상되는 것이

  • PDF

The Relative Height Error Analysis of Digital Elevation Model on South Korea to Determine the TargetVertical Accuracy of CAS500-4 (농림위성의 목표 수직기하 정확도 결정을 위한 남한 지역 수치표고모델 상대 오차 분석)

  • Baek, Won-Kyung;Yu, Jin-Woo;Yoon, Young-Woong;Jung, Hyung-Sup;Lim, Joongbin
    • Korean Journal of Remote Sensing
    • /
    • v.37 no.5_1
    • /
    • pp.1043-1059
    • /
    • 2021
  • Forest and agricultural land are very important factors in the environmental ecosystem and securing food resources. Forest and agricultural land should be monitored regularly. CAS500-4 data are expected to be effectively used as a supplement of monitoring forest and agricultural land. Prior to the launch of the CAS500-4, the relative canopy height error analysis of the digital elevation model on South Korea was performed to determine the vertical target accuracy. Especially, by considering area of interest of the CAS500-4 (mountainous or agricultural area), it is conducted that vertical error analysis according to the slope and canopy. For Gongju, Jeju, and Samcheok, the average root mean squared differences were calculated compared to the drone LiDAR digitalsurface models, which were filmed in autumn and winter and the 5 m digital elevation model from the National Geographic Information Institute. As a result, the Shuttle radar topography mission digital elevation model showed a root mean squared differences of about 8.35, 8.19, and 7.49 m, respectively, while the Copernicus digital elevation model showed a root mean squared differences of about 5.65, 6.73, and 7.39 m, respectively. In addition, the root mean squared difference of shuttle radar topography mission digital elevation model and the Copernicus digital elevation model according to the slope angle were estimated on South Korea compared to the 5 m digital elevation model from the National Geographic Information Institute. At the slope angle of between 0° to 5°, root mean squared differences of the Shuttle radar topography mission digital elevation model and the Copernicus digital elevation model showed 3.62 and 2.52 m, respectively. On the other hands root mean squared differences of the Shuttle radar topography mission digital elevation model and the Copernicus digital elevation model respectively showed about 10.16 and 11.62 m at the slope angle of 35° or higher.

Thermal Behavior and Leaf Temperature in a High Pressure Sodium Lamp Supplemented Greenhouse (고압나트륨등 보광 온실의 열적 거동 및 엽온 분석)

  • Seungri Yoon;Jin Hyun Kim;Minju Shin;Dongpil Kim;Ji Wong Bang;Ho Jeong Jeong;Tae In Ahn
    • Journal of Bio-Environment Control
    • /
    • v.32 no.1
    • /
    • pp.48-56
    • /
    • 2023
  • High-pressure sodium (HPS) lamps have been widely used as a useful supplemental light source to emit sufficient photosynthetically active radiation and provide a radiant heat, which contribute the heat requirement in greenhouses. The objective of this study to analyze the thermal characteristics of HPS lamp and thermal behavior in supplemented greenhouse, and evaluate the performance of a horizontal leaf temperature of sweet pepper plants using computational fluid dynamics (CFD) simulation. We simulated horizontal leaf temperature on upper canopy according to three growth stage scenarios, which represented 1.0, 1.6, and 2.2 plant height, respectively. We also measured vertical leaf and air temperature accompanied by heat generation of HPS lamps. There was large leaf to air temperature differential due to non-uniformity in temperature. In our numerical calculation, thermal energy of HPS lamps contributed of 50.1% the total heat requirement on Dec. 2022. The CFD model was validated by comparing measured and simulated data at the same operating condition. Mean absolute error and root mean square error were below 0.5, which means the CFD simulation values were highly accurate. Our result about vertical leaf and air temperature can be used in decision making for efficient thermal energy management and crop growth.

Analyzing Site Characteristics and Suitability for Wind Farm Facilities in Forest Lands (산지 내 풍력발전단지 입지 특성 및 적합성 분석)

  • Kwon, Soon-Duk;Joo, Woo-Yeong;Kim, Won-Kyung;Kim, Jong-Ho;Kim, Eun-Hee
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.17 no.4
    • /
    • pp.86-100
    • /
    • 2014
  • The purposes of this study are to provide a guideline for the suitability of wind farm facilities in forest lands and to suggest improvement plans of policies and systems to minimize the damage of forest lands. First, we implemented a literature review and field surveys to examine and select factors for the suitability of wind farm facilities in forest lands. Spatial database for selected location factors of wind farm facilities in forest lands was constructed to develop the suitability model for locating wind farm facilities focusing on Gangwon-do. Data used in this study include wind power resource, legal mountainous preserved area, forest roads, developed areas, forest class, and other spatial data. In order to find specific-sized potential areas for a certain number of wind farm turbines, we used block statistics and focal statistics methods. As a result, the areas for potential wind farm locations were 1,261ha from a block statistics method and 1,411ha from a focal statistics method. Based on the outputs of this research, it is required to make an urgent solution for the prevention of forest disaster and to prepare reduction measures for the destruction of ridge landscape.

Forming Shop Analysis with Adaptive Systems Approach (적응시스템 접근법을 이용한 조선소 가공공장 분석)

  • Dong-Hun Shin;Jong-Hun Woo;Jang-Hyun Lee;Jong-Gye Shin
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.39 no.3
    • /
    • pp.75-80
    • /
    • 2002
  • In these days of severe struggle for existence, the world has changed a great deal to global and digital oriented period. The enterprises try to introduce new management and production system to adapt such a change. But, if the only new technologies are applied to an enterprise without definite analysis about manufacturing, failure fellows as a logical consequence. Hence, enterprise must analyze manufacturing system definitely and needs new methodologies to mitigate risk. This study suggests that the new approach, which is systems approach for process improvement, is organized to systems analysis, systems diagnosis, and systems verification. Systems analysis analyzes manufacturing systems with object-oriented methodology-UML(Unified Modeling language) from a point of product, process, and resource view. Systems diagnosis identifies the constraints to optimize the system through scientific management or TOC(Theory of constraints). Systems verification shows the solution with virtual manufacturing technique applied to the core problem which emerged from systems diagnosis. This research shows the artifacts to improve the productivity with the above methodology applied to forming shop. UML provides the definite tool for analysis and re-usability to adapt itself to environment easily. The logical tree of TOC represents logical tool to optimize the forming shop. Discrete event simulator-QUEST suggests the tool for making a decision to verify the optimized forming shop.

A Study on the Development of AI-Based Fire Fighting Facility Design Technology through Image Recognition (이미지 인식을 통한 AI 기반 소방 시설 설계 기술 개발에 관한 연구)

  • Gi-Tae Nam;Seo-Ki Jun;Doo-Chan Choi
    • Journal of the Society of Disaster Information
    • /
    • v.18 no.4
    • /
    • pp.883-890
    • /
    • 2022
  • Purpose: Currently, in the case of domestic fire fighting facility design, it is difficult to secure highquality manpower due to low design costs and overheated competition between companies, so there is a limit to improving the fire safety performance of buildings. Accordingly, AI-based firefighting design solutions were studied to solve these problems and secure leading fire engineering technologies. Method: Through AutoCAD, which is widely used in existing fire fighting design, the procedures required for basic design and implementation design were processed, and AI technology was utilized through the YOLO v4 object recognition deep learning model. Result: Through the design process for fire fighting facilities, the facility was determined and the drawing design automation was carried out. In addition, by learning images of doors and pillars, artificial intelligence recognized the part and implemented the function of selecting boundary areas and installing piping and fire fighting facilities. Conclusion: Based on artificial intelligence technology, it was confirmed that human and material resources could be reduced when creating basic and implementation design drawings for building fire protection facilities, and technology was secured in artificial intelligence-based fire fighting design through prior technology development.

A Study of Obtaining Reliable Travel Time Information in Downhole Seismic Method (다운홀 기법에서 신뢰성 있는 도달시간 정보 산출 방법에 대한 고찰)

  • Bang, Eun-Seok;Lee, Sei-Hyun;Kim, Jong-Tae;Kim, Dong-Soo
    • Journal of the Korean Geotechnical Society
    • /
    • v.23 no.8
    • /
    • pp.17-33
    • /
    • 2007
  • Downhole seismic method is widely used for obtaining shear wave velocity profile of a site because it is simple and economical. Determining accurate travel time of shear wave is very important to obtain reliable result in downhole seismic method. In this paper, comparison study of various travel time determination methods was performed. Numerical study and model chamber test were performed for effective comparison study. Signal traces were acquired by performing downhole test at each numerical simulation and soil box test. Travel time data for each signal traces were determined by using six different methods and Vs profiles were evaluated. Comparing travel time data and Vs profiles with the reference value, the first arrival picking method proved to be ambiguous and unreliable. Other methods also did not always provide accurate results and the magnitude of error was dependent on the signal to noise ratio. Cross-correlation method proved to be the most adequate method for the field application and it was verified additionally with field data.