• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.168-169
• /
• 2001

1.55 $\mu\textrm{m}$ 파장 대역에서 동작하는 파장가변 단일 주파수 레이저는 WDM 통신 시스템, 광섬유 센서, 분광학 분야에 유용하게 사용될 수 있다. 특히 어븀첨가 광섬유 레이저로 파장가변 단일 주파수 레이저를 구현하면 선폭이 가늘고, 세기 잡음이 작고, 출력 세기가 크다는 장점이 있기 때문에 많은 연구가 있어 왔다. 본 논문에서는 음향광학 대역투과 필터 (acousto-optic tunable bandpass filter, AOTBF)와 광섬유 흡수 격자를 사용하는 선형공진기 형태의 파장가변 단일 주파수 광섬유 레이저에 대해서 제안하고 구현하였다. (중략)

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.6
• /
• pp.899-905
• /
• 2013

In this paper, we focus on how to calibrate multi-cameras easily and how to efficiently detect quad-copters with small-numbered particles. Each particle is a six dimensional vector that is composed of 3D position and 3D orientation of a quad-copter in the space. Due to curse of dimensionality, that leads to explosive computational costs with a large amount of high-dimensioned particles. To detect efficiently, we need to put more particles in very promising spaces and few particles in other spaces. Though computational cost is lowered by minimizing particles, in order to track a quad-copter with multiple cameras in real-time, multiple images from the cameras should be synchronized and analyzed. Therefore, lots of the computations still need to be done. Because of this, GPGPU(General-Purpose computing on Graphics Processing Units) is implemented for parallel computing. This method has been successfully tested and gives accurate results in practical situations.

• Korean Journal of Optics and Photonics
• /
• v.19 no.4
• /
• pp.315-319
• /
• 2008

We investigate theoretically the power consumption of a notch filter using a thermo-optic long-period grating, which is induced by a heater array consisting of periodic heaters and pads made of metal thin-film. Since the power consumed by the heater array is converted to joule heat that generates the thermo-optic long-period grating, the characteristics of the notch filter are dynamically controlled by adjusting it. The power necessary for appropriate coupling efficiency depends on the parameters of the heater array, which are the width and length of a heater, pad width, and the thickness of the thin-film. We explain an approximate method of analyzing the influence of the parameters on the consumed power. Using the analysis method, we simulate the change of the power depending on the parameters. From the simulation, we suggest a few guidelines on the parameters required to reduce the power.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2010.10a
• /
• pp.155-156
• /
• 2010

포텐셜 자료의 해석을 위해서는 상하향 연속을 이용하는 경우가 많다. 빠른 계산과 다양한 적용성 때문에 FFT(Fast Fourier Transform)을 이용한 상하향 연속을 주로 사용하는데, FFT를 적용하기 위해서는 격자망 형태로 얻어진 자료가 필요하다. 현장 중자력 자료는 보통 산발적(scattered)으로 얻어지기 때문에 FFT를 수행하기 위하여 격자망 자료로 변환하는 격자화(gridding) 과정에서 계산적인 오차가 발생한다. 반면 등가샘(equivalent source) 방법은 주어진 자료에 맞는 가상의 샘(source)들의 조합을 생성하고, 구해진 샘들의 조합으로부터 임의의 영역에서 필드값을 구하므로 격자화 과정이 필요없다. 이 연구의 목적은 등가샘 방법의 필요성을 보이고 여러 가지 등가샘 알고리즘을 비교분석하고 현장 자료에 사용하기 적합한 등가샘 방법들을 보여주는데 있다. 그림 1에서 보듯이 FFT를 사용한 상향 연속은 FFT 이론상 전 영역에 대한 적분이 필요하나 현장에서는 일부분의 자료만을 획득할 수 있으므로 상향 연속에서 정확한 자력값으로 연속을 수행하는 것은 불가능하다. 그러나 주어진 값들로 등가샘을 구성하여 상향 연속을수행한 결과는 상대적으로 보다 정확한 해에 도달한다. 또한 등가샘 방법을 이용한 연속의 장점은 그림 2와 같이 얻어진 자료의 높이가 서로 다른 자료를 주어진 높이로 연속을수행할 수 있다는 점이다. 또한 한번 등가샘들을 구성하면 이를 이용하여 격자화, 필터링 등을 해석을 위한 기초 자료처리에 적용할 수 있다.

• Korean Journal of Optics and Photonics
• /
• v.18 no.2
• /
• pp.142-148
• /
• 2007

A mechanically induced long-period fiber grating array was fabricated and its transmission characteristics were measured. The grating away consisted of a rubber cover and a 45 cm metal bar with 10 grating groups. Each grating group was composed of 60 gratings. The period of the grating of the grating groups was increased by $10{\mu}m$ increments from $690{\mu}m$ to $780{\mu}m$. The long period fiber grating was induced when the pressure was applied on the long period grating array and the resonant wavelength depended on the position of applied pressure. The experimental results shows that this long period fiber grating away can be used as a various band rejection filter or a fiber optic sensor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.9
• /
• pp.1248-1256
• /
• 1993

The propagation and delay properties in opical fiber are particularly attractive because digital signal processing and conventional analog signal processing techniques such as those using surface acoustic wave devices are limited In their usefulness for signal bandwidth exceeding one or two GHz, although they are very effective at lower frequencies. Since an accurate, low loss and short time delay elements can be obtained by using such an optical fiber, optical signal precessing has attracted much attention for high speed and broad-band signal precessing in particular channel separation filtering for optical FDM signals. In this paper, we consider a coherent optical lattice filter, which uses coherent light sources and consists of directional couplers and optical fiber delay elemnts. The optical fiber fitters are more restricted than the usual digital filters. The reasons are as follows. 1) the coupling coefficients of directional couplers are restricted to the number between 0 and 1. 2) optical signal E(complex amplitude) is divided into J If-$\boxUl$ and J L/7$\div$$\boxUl$ at the directional coupler. Considering these restrictions and in this case all the coupling coefficients of summing and branching elements are set to be equal, we have given design formulae for optical lattice filter, which make the best use of optical signal energy.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04b
• /
• pp.31-33
• /
• 2001

고비용의 공간 연산을 수행해야 하는 공간 질의 처리는 여과-정제의 2단계 처리가 일반적이다. 그러나, 2단계 색인 방법은 여과율이 좋지 못한 단점이 있으므로, 최근 다단계 여과 과정이 많이 연구되고 있다. 다단계 여과 과정은 1차 여과된 객체에 대하여 더욱 정밀한 필터를 적용함으로써 후부 객체 수를 줄이는 방법으로 접근하고 있으나, 여러 번의 여과 단계를 거치므로 수행 시간이 길어지고 추가 정보유지로 인한 저장 공간 낭비 등의 단점이 있다. 본 논문에서는 전체 공간 영역을 격자로 분할하고, 객체를 격자 위에 구성하는 2단계의 공간 색인 방법을 제안한다. 제안된 색인 방법은 Dead Space의 크기를 줄이고, 한 번의 여과 과정으로 높은 여과율을 갖는다.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.1
• /
• pp.34-42
• /
• 1992

This paper presents two fast least-squares lattice algorithms for adaptive nonlinear filters equipped with bilinear system models. The lattice filters perform a Gram-Schmidt orthogonalization of the input data and have very good numerical properties. Furthermore, the computational complexity of the algorithms is an order of magnitude snaller than previously algorithm is an order of magnitude smaller than previously available methods. The first of the two approaches is an equation error algorithm that uses the measured desired response signal directly to comprte the adaptive filter outputs. This method is conceptually very simple`however, it will result in biased system models in the presence of measurement noise. The second approach is an approximate least-squares output error solution. In this case, the past samples of the output of the adaptive system itself are used to produce the filter output at the current time. Results of several experiments that demonstrate and compare the properties of the adaptive bilinear filters are also presented in this paper. These results indicate that the output error algorithm is less sensitive to output measurement noise than the squation error method.

• Korean Journal of Optics and Photonics
• /
• v.19 no.6
• /
• pp.429-434
• /
• 2008

We propose a wavelength filter based on long-range surface plasmon-polaritons (LR-SPP) supported by a asymmetric doubleelectrode LR-SPP structure. For the case of the asymmetric double-layered LR-SPP waveguide, LR-SPPs exist with a much broader range of index mismatches between core and clad materials. Thus, the asymmetric double-electrode LR-SPP waveguide is adequate to form a plasmonic band-gap device as we report in this paper by studying Bragg-reflection wavelength filter based on it. The structure for wavelength filter operating telecommunications wavelength is designed by using the method of line (MoL) and the transfer matrix method. The fabricated device shows a relatively high extinction ratio of 50 dB with a bandwidth of 2 nm, and the performance is very consistent with numerical simulations.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.10
• /
• pp.39-50
• /
• 1998

Wide-band sharp-transition filters are widely used in applications such as wireless CODEC design or medical systems. Since these filters suffer from large sensitivity and roundoff noise, large word-length is required for the VLSI implementation, which increases the hardware size and the power consumption of the chip. In this paper, a low-power implementation technique for digital filters with wide-band sharp-transition characteristics is proposed using CPL (Complementary Pass-Transistor Logic), LWDF (Lattice Wave Digital Filter) and a modified DIFIR (Decomposed & Interpolated FIR) algorithm. To reduce the short-circuit current component in CPL circuits due to threshold voltage reduction through the pass transistor, three different approaches can be used: cross-coupled PMOS latch, PMOS body biasing and weak PMOS latch. Of the three, the cross-coupled PMOS latch approach is the most realistic solution when the noise margin as well as the energy-delay product is considered. To optimize CPL transistor size with insight, the empirical formulas for the delay and energy consumption in the basic structure of CPL circuits were derived from the simulation results. In addition, the filter coefficients are encoded using CSD (Canonic Signed Digit) format and optimized by a coefficient quantization program. The hardware cost is minimized further by a modified DIFIR algorithm. Simulation result shows that the proposed method can achieve about 38% reductions in power consumption compared with the conventional method.