• Korean Journal of Digital Imaging in Medicine
• /
• v.9 no.1
• /
• pp.7-15
• /
• 2007

This study aim to investigate image characteristics due to focus-grid and head phantom decentering from the armorphos silicon thin film transistor detector the fixed focus-grid is applied, wish to propose right use method of digital medical equipment. Acquired image according to focus-grid and head phantom position decentering using head phantom on armorphos silicon thin film transistor detector the fixed focus-grid is applied. acquired image evaluate pixel value, histogram, plot profile, surface plot using NIB (Image J) image analysis program and compared decentering image with standard image. Mean value and standard deviation value of focus-grid lateral decentering and duplex decentering of focus-grid and head phantom decreased by ratio, consequently increase of horizontality, diagonal decentering. also, deteriorated contrast of image because frequency of high pixel value decreases fairly. according increases decentering, image distortion phenomenon was increase, by next time, pixel mean value of head phantom decentering was no big change but horizontality, diagonal, mean value and standard deviation value of pixel decreased by ratio. Even if increase pixel noise of image because wide latitude and post processing ability of digital detector, radiotechnologist can not recognize. Therefore, radiotechnologist must recognize correctly the photographing factors which increases pixel noise on the grid system installation digital detector and should exam.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.73-81
• /
• 2022

Recently, as the service life of structures increased, the load-carrying capacity of deteriorated reinforced concrete, where corrosion of reinforcing bars occurs due to various causes, is frequently decreased. In order to address this problem, many studies on the bond characteristic of FRP (Fiber Reinforced Polymer) bars with corrosion resistance, light weight and high tensile strength have been conducted, however there are not many studies on the bond characteristic of grid-typed CFRP embedded in concrete. Therefore, in order to evaluate the bond characteristics of grid-typed CFRP and its usability as a substitute for steel rebar, a pull-out test is performed using the longitudinal bond length and transverse grid length of the grid-typed CFRP as variables. Through the pull-out test, the bond load-slip curve of the grid-typed CFRP is derived, and the bond behavior is analyzed. The total bond load equation is proposed as the sum of the bond force of the longitudinal bond length and the shear force of the grid in the transverse direction. Also, expressing the area of the bond load-slip curve as total work, the change in dissipated energy with respect to the slip is analyzed to examine the effect of the tranverse grid on the bond force.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.259-271
• /
• 2022

Lattice preferred orientation (LPO), which shows a specific lattice-orientation of minerals, is affected by the deformation conditions of minerals. Because of this reason, LPO is very useful to study the deformation conditions of the minerals and the rocks. In this study, we collected amphibole-rich rocks from the Geumgye Mountain, Chugye-ri, Yugu-eup, Chungcheongnamdo, located in the southwestern part of the Gyeonggi Massif, and analyzed the LPO of amphibole and plagioclase using electron backscattered diffraction. Two types of LPOs of amphibole, type I and type IV, were observed in Yugu amphibole-rich rocks. Our data suggest that the amphibole-rich rocks in Yugu were deformed by rigid body rotation regardless of the LPOs and grain size of amphibole, and the LPOs are considered to have been affected by the degree of deformation (i.e. strain). In the low strained amphibole-rich rock, a strong type I LPO and a large grain size of amphibole were observed. On the other hand, in the highly strained amphibole-rich rocks, a weak type IV LPO and a small grain size of amphibole were observed. The various degree of deformation observed in the Yugu amphibole-rich rocks were also observed in the adjacent peridotites, indicating that the rocks in Yugu experienced various levels of deformation.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.1
• /
• pp.63-67
• /
• 2015

In this study, we demonstrate the change of optical characteristic by thickness of metal deposition on nano metal grid polarizer film fabrication. Nano metal grid polarizer film consists of aluminium grid polarizer layer on PET (Polyethylene phthalate) substrate. We aim at metal grid layer formation for the large nano wire grid polarizer fabrication. we draw process conditions of the nano metal grid polarizer film fabrication to improve transmittance and extinction ratio and Nano wire grid polarizer film (NWGP) film is fabricated with 140 nm pitch, 70 nm width, and 70 nm depth of metal grid on optimum design conditions. As a result, we get high optical properties of nano wire grid polarizer which is the maximum transmittance of 80% and the extinction ratio of $10^6$ at 600 nm wavelength respectively.

• Geophysics and Geophysical Exploration
• /
• v.6 no.2
• /
• pp.77-86
• /
• 2003

We designed a new time-domain, finite-difference, elastic wave modeling technique, based on a displacement formulation. which yields nearly correct solutions to Lamb's problem. Unlike the conventional, displacement-based, finite-difference method using a node-based grid set (where both displacements and material properties such as density and Lame constants are assigned to nodal points), in our new finite-difference method, we use a cell-based grid set (where displacements are still defined at nodal points but material properties within cells). In the case of using the cell-based grid set, stress-free conditions at the free surface are naturally described by the changes in the material properties without any additional free-surface boundary condition. Through numerical tests, we confirmed that the new second-order finite differences formulated in the cell-based grid let generate numerical solutions compatible with analytic solutions unlike the old second-order finite-differences formulated in the node-based grid set.

• Journal of the Korea Concrete Institute
• /
• v.15 no.3
• /
• pp.377-385
• /
• 2003

Flexural characteristics of the R.C beams strengthened with newly-developed grid-type carbon fiber plastics(CFRP-GRIDS) were investigated. The tests were conducted under the four-points load to the failure to investigate the strengthening effects of CFRP-GRIDS on the beams. Results showed that initial cracks appeared in the boundary layers of fibers embedded in the newly-placed mortar concrete slowly progressed to the direction of supports and showed fracture of fiber plastics and brittle failure of concrete in compression in sequence after the yielding of steel reinforcement. Accordingly, the appropriate area of Grid-type carbon-fiber plastics in the strengthening design of deteriorated RC structures should be limited and given based on the ultimate strength design method to avoid the brittle failure of concrete structures.

• Korean Journal of Optics and Photonics
• /
• v.33 no.1
• /
• pp.22-27
• /
• 2022

We fabricate a polarization-independent dielectric multilayer thin-film diffraction grating for a spectral-beam-combining (SBC) system with a simple grating structure and low aspect ratio. Due to the refractive index and thickness error of the manufactured thin films, the diffraction efficiency of the fabricated diffraction grating was lower than that of the design. The causes of the errors were analyzed, and it was confirmed through simulation that diffraction efficiency could be compensated through an additional coating on the manufactured diffraction grating. As a result of sputtering an additional Ta₂O₅ layer on a fabricated diffraction grating, the diffraction efficiency was corrected and a maximum 91.7% of polarization-independent diffraction efficiency was obtained.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.5
• /
• pp.1133-1144
• /
• 2017

Cluster analysis with meteorological data allows to segment meteorological region based on meteorological characteristics. By the way, meteorological observed data are not adequate for cluster analysis because meteorological stations which observe the data are located not uniformly. Therefore the clustering of meteorological observed data cannot reflect the climate characteristic of South Korea properly. The clustering of $5km{\times}5km$ gridded data derived from a numerical model, on the other hand, reflect it evenly. In this study, we analyzed long-term grid data for temperatures and precipitation using cluster analysis. Due to the monthly difference of climate characteristics, clustering was performed by month. As the result of K-Means cluster analysis is so sensitive to initial values, we used initial values with Ward method which is hierarchical cluster analysis method. Based on clustering of gridded data, cluster of meteorological stations were determined. As a result, clustering of meteorological stations in South Korea has been made spatio-temporal segmentation.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.191-211
• /
• 2017

Assessment of a storm is accomplished by the duration and storm area rather than a simple analysis given by the ground rain gauge stations. One of the best method for assessing storm is Depth-Area-Duration(DAD) of rainfall analysis. but existing DAD analysis method is likely to possible errors. Therefore, DAD analysis and its applicability were examined using a grid-based DAD analysis program that can reduce the possibility of errors in this study. Three spatial distribution techniques were used to analyze the applicability. Then, DAD analysis was performed using the converted grid-based rainfall data. As a result, it was possible to estimate the MAAR values by area for each duration, and showed high applicability in the rainfall data using ordinary kriging technique.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.217-222
• /
• 2015

Longitudinal transmission-line modal theory is applied to analyze the guiding mode characteristics along 1D & 2D grating patterns of plasmonic grating-assisted directional couplers (P-GADC) based on silicon waveguide. By defining supermodes amenable to rigorous analytical solutions and interference between even and odd modes, the field distributions of TE modes for each grating patterns are evaluated. The numerical result reveals that the field distribution with maximum coupling efficiency occurs at P-GADC composed by square grating pattern. That is, it reveals at a minium gap condition of grating period $d_{min}=8.8{\mu}m$ different from conventional phase-matching condition of GADC.