Journal of the korean academy of Pediatric Dentistry
/
v.32
no.2
/
pp.332-343
/
2005
The purpose of this study was to evaluate the influence of soft-start light curing on contraction stress and hardness of composite resin. Composite resin mold was cured using the one-step continuous curing method with three difference light sources; conventional halogen light curing for 40 seconds at $400\;mw/cm^2$, plasma arc light curing for 6 seconds at $1300\;mW/cm^2$ and LED light curing for 10 seconds at $7The purpose of this study was to evaluate the influence of soft-start light curing on contraction stress and hardness of composite resin. Composite resin mold was cured using the one-step continuous curing method with three difference light sources; conventional halogen light curing for 40 seconds at . For the soft-start curing method ; 2 seconds light exposure at $650\;mW/cm^2$ followed by 3 seconds at $1300\;mW/cm^2$ and exponential increase with 5 seconds followed by 10 seconds at $700\;mW/cm^2$ were used. Contraction stress was measured using strain gauge method and Vickers hardness was measured 24 hours after polymerization at the top and bottom of specimens. Resin-acrylic interfaces were observed using a scanning electron microscope(SEM). The results of present study can be summarized as follows: 1. Contraction stresses at 10 min after polymerization were significantly reduced with the soft-start curing both in plasma and LED light sources(P<0.05). 2. Plasma light curing with soft-start resulted in not only the lowest contraction stress, but also the lowest hardness(P<0.05) 3. LED light curing with soft-start showed lower contraction stress than the one-step continuous halogen and LED light curing(P<0.05). 4. Microhardness of specimens cured by LED light with soft-start was equivalent to that of cured by the one-step continuous halogen and LED light(P>0.05). 5. Curing by LED light with soft-start and conventional halogen light resulted in better marginal sealing than plasma light and one-step LED light curing.
Koo, Kyo Soung;Park, Hye Rin;Choi, Jae Hyeok;Sung, Ha Cheol
Korean Journal of Environment and Ecology
/
v.34
no.2
/
pp.106-114
/
2020
The development of transportation and the expansion of the pet market has become the main causes of the increase in the cross-border migration of non-native species. Moreover, recent sales over the Internet were a factor that has promoted pet trades. While the import of non-native species has been steadily increasing in the Republic of Korea, it is not clear how these imported species are traded and how large the trade is. Considering that most of the non-native species found in the wild are the results of release by humans understanding the present situation of pet trades can identify potential non-native species that can enter the wild. This study surveyed the number of species, frequency, and prices of non-native amphibians and reptiles sold in 25 online pet shops from January 22 to February 10, 2019. The results of the survey showed that a total of 677 species of non-native amphibians and reptiles were sold, and the Squamata group accounted for the largest part of them at 65.4% (443 species). The number of non-native amphibians and reptiles sold in online pet shops in 2019 was 2.1 times larger than the 325 species officially imported in 2015. The non-native amphibians and reptiles sold in most pet shops were Litoria caerulea (21 shops) and Correlophus ciliatus (24 shops). The lowest price for non-native amphibians and reptiles was 3,000 won, and the highest price was 100 million won for Rhacodactylus leachianus of Squamata. Among the non-native amphibians and reptiles sold in online pet shops, 11 species were found in the wild and were sold at relatively low prices. We confirmed that Mauremys reevesii, an endangered species class II and natural monument no. 453, and American bullfrogs (albino), an ecosystem disturbing species, were being sold in online pet shops. Moreover, 21.6% of the 677 non-native amphibians and reptiles sold in online pet shops were species designated as CITES. The results of this study can be the important reference data for understanding the status of non-native amphibians and reptiles that are imported and sold in Korea and evaluating and predicting the potential for them to enter the wild.
Park, Kyung-Chul;Park, Chang-Ho;Chon, Kyung-Soo;Rhee, Sung-Mo
Journal of Korean Society for Geospatial Information Science
/
v.8
no.1
s.15
/
pp.51-63
/
2000
Dynamic traffic assignment(DTA) has been a topic of substantial research during the past decade. While DTA is gradually maturing, many aspects of DTA still need improvement, especially regarding its formulation and solution algerian Recently, with its promise for In(Intelligent Transportation System) and GIS(Geographic Information System) applications, DTA have received increasing attention. This potential also implies higher requirement for DTA modeling, especially regarding its solution efficiency for real-time implementation. But DTA have many mathematical difficulties in searching process due to the complexity of spatial and temporal variables. Although many solution algorithms have been studied, conventional methods cannot iud the solution in case that objective function or constraints is not convex. In this paper, the genetic algorithm to find the solution of DTA is applied and the Merchant-Nemhauser model is used as DTA model because it has a nonconvex constraint set. To handle the nonconvex constraint set the GENOCOP III system which is a kind of the genetic algorithm is used in this study. Results for the sample network have been compared with the results of conventional method.
Journal of the korean academy of Pediatric Dentistry
/
v.37
no.1
/
pp.117-123
/
2010
Tooth eruption is the movement of the tooth from the developing place in the alveolar bone to the functional position in the oral cavity. The permanent incisors originate from the dental lamina on the lingual side of preceding deciduous tooth and erupt to the level of the occlusion through the well developed gubernacular cord. Ectopic eruption is a developmental disturbance in the eruption pattern of the permanent dentition. Most of the ectopically erupted lower incisor has been found in lingual side. The ectopically erupted tooth could be repositioned by orthodontic force in the early mixed dentition, which could help preventing the problems of loss of space and the lingual tilting of the lower anterior teeth. An eight-year-old girl visited the department of pediatric dentistry, Yonsei Dental University Hospital, for the evaluation and the treatment of the lower right lateral incisor, which was horizontally erupted in the lingual side, parallel to the mouth floor. Her tongue was placed on the labial side of that tooth. There was no previous dental history of dental caries or trauma on the pre-occupied primary incisor. Clinical and radiographic examinations including the computed tomography(CT), showed no evidence of dilacerations on root. Therefore, we decided to start active orthodontic traction of the lower right lateral incisor. We designed the fixed type of buccal arch wire and the lip bumper with hook for the traction. Button was attached to the lingual side of the ectopically positioned tooth. Elastic was used between the appliance and the button on that tooth. After the tooth become upright over the tongue level, appliance was change to the removable type and periodic check-up with occlusal guidance was followed to monitor the position of the tooth. In this case using the fixed appliance with modified form of lip bumper and hook embedded in acrylic part instead of extraction was very efficient up-righting the ectopically erupted tooth toward the occlusal plane.
제7차 교육과정의 기본방향인 '21세기의 세계화 정보화 시대를 주도할 자율적이고 창의적인 한국인 육성'에서 볼 수 있듯이, 새로운 교육과정에서는 학생들의 창의력을 신장시키기 위한 방안으로 교과별 교육과정이나 재량활동 운영 등을 제시한 바 있다. 수학교육에서도 이러한 시대적 흐름에 발맞추어 수학적 창의력의 신장이 강조되고 있는 상황이다. 그동안 이론적인 측면과 실제적인 측면에서 수학적 창의성에 대한 성과가 축적되었다. 이론적인 측면에서 볼 때, Haylock(1987)등에 의해 창의력과 수학적 창의력의 구분되었으며, 특히 '수학적' 창의력에 대한 다양한 정의가 제안되었다. 실제적인 측면에서도 수학적 창의력을 측정하려는 평가 도구들이 그 동안 여러 가지로 개발하였다. 그러나, 이러한 수학적 창의력에 관한 전반적인 연구는 종국적으로 교실 수학수업에 반영되어야 함에도 불구하고, 그리 만족스럽지 못한 상황이다. 특히, 교실에서 수학수업을 실제로 담당하는 교사들이 수학적 창의력을 위한 수업을 하고자 하더라도 당장 가까이에서 구할 수 있는 교수 학습 자료가 여전히 부족한 상황이다. 물론 그 동안 교실 수학수업에서 사용할 수 있는 창의력 개발 프로그램이 전무한 것은 아니다. 그런데 그들 대부분은 게임이나 퍼즐을 이용한 것으로 그 수준이 단순 흥미유발에 그치고 있거나 소수의 영재아를 위한 소재를 중심으로, 특히 수학적 사고 과정을 따르기보다는, 시행착오를 거쳐 원하는 결과를 얻을 가능성이 많으며, 수학과의 연계성이 불분명한 채로 단순놀이에 그치는 경우가 적지 않아, 수업과 연관되어 창의력의 신장이라는 측면에서 볼 때, 적용하기 어려운 사례가 많다. 이러한 상황을 개선하는 데 기여하고자, 현재 교과교육공동연구 지원사업의 하나로 한국 학술 진흥재단의 지원을 받아, '개방형 문제(open-ended problems)'를 중심 소재로 한 '수학적 창의성'을 신장하기 위한 교수학습 프로그램을 개발하여, 중학교 1학년을 대상으로 연구를 진행하고 있다. 개방형 문제라 함은 명백한 정의가 어렵지만 Pehkeon(1995)는 개방형문제의 정의를 명백히 하기위한 시도로서 그 반대로 닫힌 문제에 대한 정의로부터 시작하여, 어떤 문제가 닫혀있다고 하는 것은 그 문제의 출발 상황과 목표 상황이 닫혀 있는 것, 즉 명백히 설명되어있을 때라면 개방형 문제는 이와 반대의 개념임을 시사하였다. Silver(1995)는 개방형 문제를 문제 자체가 다른 해석이 가능하거나 서로 다를 인정할만한 답을 가질 수 있는 문제 또는 풀이과정이 다양한 문제, 자연스럽게 다른 문제들을 제안하거나 일반화를 제시할 수 있는 문제라고 정의하였다. 따라서 개방형 문제란 출발상황이나 목표 상황의 일부가 닫혀있지 않을 때를 말하고 문제의 조건을 만족하는 해답이 여러 가지로 존재하는 문제를 뜻한다. 수학적 창의력을 개발하는 데, 다른 문제 유형보다도, 개방형 문제가 유리하다는 점은 이미 여러 학자들에 의해 주장되어왔다. 미국 국립영재교육센터(NRCG/T)는 기존의 사지선다형이나 단답형 문제와 질문들은 학생들의 사고 능력에 관한 정보를 거의 알려주지 못하기 때문에 한 가지 이상의 답을 요구하는 ‘open-ended' 또는 ’open-response' 문제와 질문을 가지고 수학 분야에서의 창의적 사고 능력과 표현능력을 측정해야 한다고 하였고, 개방형 문제가 일반적으로 정답이 하나인 문제보다 고차원적인 사고를 요구하게 하는 문제 형태라고 하였다. 본 연구에서는 이러한 근거를 바탕으로 개방형 문제의 유형을 다양한 답이 존재하는 문제, 다양한 해결 전략이 가능한 문제, 답이 없는 문제, 문제 만들기, 일반화가 가능한 문제 등으로 보고, 수학적 창의성 중 특히 확산적 사고에 초점을 맞추어 개방형 문제가 확산적 사고의 요소인 유창성, 독창성, 유연성 등에 각각 어떤 영향을 미치는지 20주의 프로그램을 개발, 진행하여 그 효과를 검증하고자 한다. 개방형 문제를 활용한 수학적 창의력 신장 프로그램을 개발하고 현장 학교에 실험 적용하여 그 효과를 분석하고자 하는 본 연구는 창의력 신장에 비중을 두는 수학과 교수-학습 과정에 실제적인 교수 학습 자료를 제공하는 것뿐만 아니라 교사들에게는 수학교실에서 사용 가능한 실제적인 활용방안을, 학생들에게는 주어진 문제를 여러 가지 각도에서 생각하면서 다양한 사고를 경험하는 기회를 가질 수 있어, 수학을 보는 학생들의 태도에도 긍정적인 변화를 가져올 수 있을 것이라 기대한다.
Cyber singer appeared in the late 1990s has disappeared briefly appeared. although a few attempts in the 2000s, it did not show significant successes. cyber singer was born thanks to the technical development of the IT industry and the emergence of an idol training system in the music industry. It was developed by Vocaloid 'Seeyou' starting from 'Adam'. cyber singer that differenatiated typical digital characters in a cartoon or game may be subject to idolize to the music as a medium. They also feature forming a plurality of fandom. therefore, such attempts and repeated failures, this could be considered a fashion, but it flew content creation and ongoing attempts to take advantage of the new media, such as Vocaloid can see that there are expectations for a true Cyber-born singer. Early-Cyber singer is made only resemble human appearance, but 'Sciart' and 'Seeyou' has been evolving to becoming more like the human capabilities. in this paper, stylized cyber singer had disappeared in the past in the process of developing the technology to evolve into own artificial life does not end in failure cases, gradually led to a change in public perceptions of the image look looking machine was an attempt in that sense. With the direction of the evolution of the mechanical function to obtain a human, fun and human exchanges and mutual feelings. And it is equipped with an artificial life form that evolved with it only in appearance and function. in order to support this logic, I refer to the study of the coevolution of man and machine at every Bruce Mazlish. And, I have analyzed the evolution of cyber singer Bruce research from the perspective of the development process since the late 1990s, the planning of the eight singers who have appeared and design of the cyber character and important voices to be evaluated as a singer (vocal). The machine has been evolving coevolution with humans. cyber singer ambivalent development targets are recognized, but strive to become the new artificial creatures of horror idea of human desire and death continues. therefore, the new Cyber-organisms are likely to be the same style as 'Seeyou'. because, cartoon forms and whirring voice may not be in the form of a signifier is the real human desires, but this is because the contemporary public's desire to be desired and the technical development of this type can be created at the point where the cross-signifier.
The duplex system has been considered as an important slip-transfer mechanism to evaluate the evolution of orogenic belts. Duplexes are generally found in the hinterland portion of fold-thrust belts and accommodate large amounts of total shortening. Thus, understanding its geometric and kinematic evolution can give information to evaluate the evolution of the entire orogenic belt. Duplexes are recognized as closed-loop thrust traces on map view, indicating higher connectivity than imbricate fans. As originally defined, a duplex is an array of thrust horses which are surrounded by thrust faults including the floor and roof thrusts, and imbricate faults between them. Duplexes can accommodate regional layer-parallel shortening and transfer slip from a floor thrust to a roof thrust. However, an imbricate fault is not the only mean for layer-parallel shortening (LPS) and displacement transfer within duplexes. LPS cleavages and detachment folds can also play the same role. From this aspect, a duplex can be divided into three types; 1) fault duplex, 2) cleavage duplex and 3) fold duplex. Fault duplex can further be subdivided into the Boyer-type duplex, which was firstly designed duplex system in the 1980s that widely applied most of the major fold-thrust belts in the world, and connecting splay duplex, which has different time order in the emplacement of horses from those of the Boyer-type. On the contrary, the cleavage and fold duplexes are newly defined types based on some selected examples. In the Korean Peninsula, the Yeongwol area, the western part of the Taebaeksan Zone of the Okcheon Belt, gives an excellent natural laboratory to study the structural geometry and kinematics of the closed-loops by thrust fault traces in terms of a duplex system. In the previous study, the Yeongwol thrust system was interpreted by alternative duplex models; a Boyer-type hinterland-dipping duplex vs. a combination of major imbricate thrusts and their connecting splays. Although the high angled beds and thrusts as well as different stratigraphic packages within the horses of the Yeongwol duplex system may prefer the later complicate model, currently, we cannot choose one simple answer between the models because of the lack of direct field evidence and time information. Therefore, further researches on the structural field investigations and geochronological analyses in the Yeongwol and adjacent areas should be carried out to test the possibility of applying the fold and cleavage duplex models to the Yeongwol thrust system, and it will eventually provide clues to solve the enigma of formation and its evolution of the Okcheon Belt.
Jang, Eun Ju;Kim, Hye Rin;Lee, Su Kyung;Kim, Eun Jo;Hwang, Shin Hye;Kim, Ji Seul;Kim, Nam Eun
Journal of Korean Home Economics Education Association
/
v.34
no.1
/
pp.35-57
/
2022
This study developed an 'Eco-friendly Clothing Life Cycle' class applying gamification. And the effect of and learners' satisfaction on the class were examined after implementation. The developed class was applied to 40 sophomore students from "A" high school in Gyeonggi-do from February 3, 2022, to February 10, 2022, in a total of 4 sessions. The class was conducted in the stages of production-distribution-consumption-disposal, and was conducted in a way that a mission is solved after learning in Gather Town. It is designed so that learners continuously repeat learning until they accomplish the mission. The learners completed pre-class and post-class questionnaires. And a focus group interview was conducted with a randomly selected group of three learners. According to the pre-/post-class test comparison, the gamification class on the theme of "Eco-friendly Clothing Life Cycle" was found not to have a significant effect on learners' immersion or self-directed learning attitudes. However, in the case of the learners with high levels of non-immersion tendency, the level of immersion in the class increased, and the satisfaction level was positively associated with the level of immersion and self-directed attitude. Learners expressed 'concern' and 'expectation' about the gamification class, and said that although the developed class was using a 'new teaching method', 'appropriate use' was necessary. And learners were evaluated this class as a 'student-centered class' and acknowledged that it allowed 'self-directed learning'. The teacher who implemented the class said that this class was more effective in attracting students' expectations and interests compared to the conventional classes, and that the class in the meta-verse environment was perceived as a new type of class in the non-face-to-face era. The teacher also mentioned that when applied to the actual educational field, a detailed design is needed that allows the learners to proceed smoothly, and the role of the teacher in the class was more important. And the teacher also mentioned that the class should be properly designed so that the expectations given by the 'game' do not obscure the essence of the class.
Recent discussions about a minimum wage increase (MWI) and its influence on the economy have mainly focused on the quantitative aspects, such as labor costs and employment. However, concerning the qualitative aspects, an MWI could have positive effects by enhancing firm productivity and crowding out marginal firms from the market. These positive effects of an MWI can offset, to some extent, its potential negative effects - increasing labor costs and decreasing employment, among others. In this regard we empirically examine the impact of an MWI on firm productivity (total factor productivity). Using firm level panel data from the manufacturing industry in Korea, we calculate the influence rates of a minimum wage by sector and by firm size (number of workers), and analyze its effects on firm productivity. In particular, the production functions of the firms are estimated by taking into account endogeneity among the input factors, in order to resolve the drawbacks of existing studies - underestimating the capital factor coefficient and overestimating the labor factor coefficient. This study finds that the influences of an MWI on wages, employment, and productivity are substantially different across sectors and firm sizes. While an MWI has shown to have positive influences on productivity growth in the manufacturing industry as a whole, each sector demonstrates a different direction of effect, and the degree of productivity change also varies by sector. The impacts of an MWI on firm productivity are generally estimated to be more negative for smaller firms, but in some sectors the effects are found to be positive. In addition, the wage increases resulting from an MWI seem to cause a productivity enhancement across all sectors in the manufacturing industry. The policy implications of this study are as follows. Considering the empirical findings that an MWI causes an increase in productivity in many sectors of the manufacturing industry, it would be desirable to take into consideration not only the negative side effects but also the positive effects of an MWI when designing any future minimum wage policy. Moreover, in spite of there being a uniform minimum wage, this study finds that the diverse influence rates of a minimum wage across firms have different impacts on wages, employment, and productivity across sectors or firm size. This finding could be conducive to discussions about differentiation among minimum wage schemes by sector or firm size.
Ji Eun Kim;Young-Soo Kim;Jung Sim Lee;Ju Eun Jang;Hyeon Jin Jeong;Aleksey L. Kim;Sang-Kuk Han;Hee-Young Gil
Korean Journal of Plant Resources
/
v.37
no.1
/
pp.35-61
/
2024
Floristic study can help to understand the current status of species diversity, evaluate and predict distribution changes of plants based on the specimens, and record the climate environment and biodiversity of the Korean Peninsula. Boraebong is an area that has plant resources of conservation value, but there is concern about artificial interference through trail and forest road. Therefore, this study aims to report the vascular plants of Boraebong based on voucher specimens and photos and to use them as baseline data to conserve biodiversity of Boraebong. Also, it will be useful to prevent additional influx of invasive species through comparison with previous studies. The investigation was carried out 11 times from April to September in 2022 and confirmed a total of 455 taxa including 87 families, 269 genera, 401 species, 13 subspecies, 35 varieties, 6 forms. In addition, we confirmed the 4 taxa of red list plants (EN 2 taxa, NT 2 taxa), 18 taxa of Korean endemic plants, and 102 taxa of floristic target species (V degree 1 taxon, IV degree 16 taxa, III degree 31 taxa, II degree 31 taxa, I degree 23 taxa). Furthermore, alien plants 17 taxa, invasive species 2 taxa, useful plants 439 taxa were confirmed in Boraebong. As the results of comparison with previous studies, 98 total taxa including 38 families, 76 genera, 86 species, 1 subspecies, 8 varieties, 3 forms were newly identified in this study.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.