• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.132-133
• /
• 2019

항공기 탑재 전자장비는 항공전원규격 MIL-STD-704에 의하여 항공 체계운용 상태에 따라 규정된 요구사항 충족 및 성능을 유지하여야 한다. 본 논문에서는 AC 115Vac 3상 400Hz 항공기 체계전원을 사용하는 탑재 부하장비의 성능 유지를 위한 DC 270V 전원공급장치의 입력전원 보호회로 구현에 대하여 기술하고 결과를 검증한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.291-293
• /
• 2012

AMD 능동형 제진장치를 이용하여 플로팅 구조물을 제어하기 위해서는 수조실험을 통해 플로팅 함체 구조물의 롤링방향에 대한 동적 특성을 추정한 후 대상 구조물 특성에 적합한 제어알고리즘을 적용하여 수치시뮬레이션을 통한 제어의 가능성 확인 및 향후 실제 제진장치를 설치하여 검증실험을 통해 플로팅 구조물 능동제어의 효과를 검증해야 한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.2
• /
• pp.102-108
• /
• 2003

This paper presents a new Data acquisition system that can improve a accuracy and response characteristics by designing a SDAS(Signal Datat Acquisition System). I&C(Instrumentation and Control) system, which it applied for Nuclear Power Plant, affects for safety either directly or indirectly. It should be assessed by the equipment qualification procedure to confirm the functionality during design life before it apply on the nuclear power plant depending on safety classification. This paper proposes data acquisition system that required as an essential measurement equipment in the method and procedure of equipment qualification following of standards and codes of IEEE and Nuclear Regulatory Guide. It provides comparable and experimental studies have been carried out. The presented results from the above investigation show considerably improved accuracy performance in the data acquisition system. This circuit will be able to be used in high performance I&C system.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.94-102
• /
• 2023

A nylon wire holding and release mechanism (HRM) has been widely used for deployable applications of CubeSat owing to its simplicity and low cost. In general, structural safety of solar panel with an HRM has been designed by performing structural analysis under a launch environment. However, previous studies have not performed thermal analysis for HRM in an on-orbit environment. In this study, Launch and Early Orbit Phase (LEOP) thermal analysis was performed to evaluate thermal stability of the mechanism in the orbital thermal environment of the pogo pin-based HRM applied to CubeSat. In addition, the effectiveness of the thermal design and performance of the pogo pin-based HRM were verified through a thermal vacuum test.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.05a
• /
• pp.444-444
• /
• 2003

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.363.1-363
• /
• 2002

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.148-150
• /
• 2017

무인선은 사람이 탑승하지 않기 때문에 회수에 어려움이 있다. 본 연구에서는 무인선의 회수를 용이하도록 하기 위하여 히빙라인 발사장치를 개발하였고, 히빙라인 발사장치 이용에 대한 검증을 위하여 해상시험을 수행하였다. 무인선 회수 시스템은 히방리인 발사장치, 견인장치, 크레인-무인선 결합장치, 원격조종기로 구성되어 있고, 히빙라인 발사장치는 발사관, 원격 격발장치, 공기통, 견인탄과 히빙라인으로 구성되어 있으며, 히빙라인 발사장치는 원격조종기를 이용하여 모선에서 제어가 가능하다. 제작된 히빙라인 발사장치를 유인선에 설치하여 실제로 해상에서 사용이 가능한지 검토하였다. 히빙라인을 원격으로 발사하고 모선에서 크레인을 이용하여 무인선에 결합하는 해상시험을 수행하였으며, 해상시험을 통하여 히빙라인 발사장치의 유용성을 확인하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.4
• /
• pp.102-109
• /
• 2006

In this paper, the system level EMC radiated emission test results of KoDSat(Korea Demonstration Satellite), its affects upon the Launch vehicle and H/W improving methods regarding its over exceed value of EMC specification are discussed. Regarding its over exceed value, we estimated that DAU of KoDSat generated the exceeded EMC noise source, and these test results were analyzed using the EMC2000 tool to find out how did it affect the FTS(Flight Termination Subsystem) of KSLV-1(Korea Small Launch Vehicle). To diminish the EMC noise source of UHF(430.1Mhz) band level, we redesigned the DAU power board to be applied the various schemes for EMI noise reduction such as grounding, shielding and EMI filtering, and also verified these reworks to analyze its diminishing affects in UHF band level by means of performing the DAU box level EMC test and performing the second KoDSat's system level EMC test.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.6
• /
• pp.248-262
• /
• 2008

As the number of large size multimedia files increases and the importance of individual's digital data grows, storage devices have been advanced to store more data into smaller spaces. In such circumstances, a physical damage in a storage device can destroy large amount of important data. Therefore, it is needed to verify the robustness of various physical faults in storage device before certain systems are used. We developed SOAR(Storage Reliability Analyzer), Storage Reliability Analyzer, to detect physical faults in diverse kinds of HDD hardware components and to recover the systems from those faults. This is a useful tool to verify robustness and reliability of a disk. SOAR uses three unique methods of creating physical damages on a disk and two unique techniques to apply the same feature on file systems. In this paper, we have performed comprehensive tests to verify the robustness and reliability of storage device with SOAR, and from the verification result we could confirm SOAR is a very efficient tool.

• Journal of Digital Convergence
• /
• v.12 no.5
• /
• pp.249-254
• /
• 2014

Recent advancement of USN technology has lent itself to the evolving communication technology for implantable devices in the field of medical service. The wireless transmission section for communication between implantable medical devices and patients is a cause of concern over invasion of privacy, resulting from external attackers' hacking and thus leakage of private medical information. In addition, any attempt to manipulate patients' medical information could end up in serious medical issues. The present study proposes an authentication protocol safe against intruders' attacks when RFID/USN technology is applied to implantable medical devices. Being safe against spoofing, information exposure and eavesdropping attacks, the proposed protocol is based on hash-function operation and adopts session keys and random numbers to prevent re-encryption. This paper verifies the security of the proposed protocol using the formal verification tool, Casper/FDR.