• Korean Journal of Clinical Laboratory Science
• /
• v.49 no.1
• /
• pp.48-54
• /
• 2017

The purpose of this study was to provide fundamental data for the plans to reduce occupational stress by analyzing occupational stress of medical technologist. The experimental group comprised of 193 medical technologists working in Gyeonggi province. Occupational stress was 49.74 out of 100. In detail, job insecurity showed a high value of 64.42, followed by organizational system, lack of reward, physical environment, job demand, insufficient job control, interpersonal conflict, and occupational climate with respective values of 52.46, 52.30, 51.18, 49.57, 48.43, 39.78 and 39.77. It is recommended that those in high-stress job group increase physical activity and reduce job insecurity to improve health. The development of programs to reduce occupational stress are necessary, and this study can provide objective information using biological indicators.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.4
• /
• pp.25-31
• /
• 2008

As we choose ground control points for aerial triangulation, we have a lot of problems in a mountain, a costal area, a desert, the foreshore etc because they don't have clear topography for control points and it spends a lot of cost and occurs problems of accuracy. In this study, we compare and analyze between ground control points from LiDAR intensity, digital map with ground control points from the field survey as doing AT each. As the result, the average error was ${\pm}1.02m$ from using LiDAR intensity, ${\pm}1.13m$ from using digital map. this result can present the control points from LiDAR intensity is 0.11m better than from digital map.

• Journal of Korean Society for Geospatial Information Science
• /
• v.6 no.2 s.12
• /
• pp.133-141
• /
• 1998

Terrain modelling is composed of a method using the rectangular grid and another using the triangulated irregular network. The method using the triangulated irregular network is most widely used because it can express the characteristics of the terrain well with only a small amount of information on the terrain and also reduces the rendering time. The process of extracting the surface-specific point and a triangular process is needed to construct such triangulated irregular network. This paper concentrates on the process of extracting the surface-specific point. The 8-direction neighborhood method and other transformed methods of the former method are frequently used to extract the surface-specific point. Another method which eliminates the unnecessary points using the Polygon reduction method is also suggested However, the 8-direction neighborhood method has a big fault of also drawing out some unnecessary points. To resolve such problem, we suggest a method of extracting the surface-specific point using the cross section of the terrain. This method reduces the time to extract the surface-specific point and enables a more precise extraction with less terrain information.

• Therapeutic Science for Rehabilitation
• /
• v.7 no.3
• /
• pp.47-58
• /
• 2018

Objective : This study was conducted to investigate the effects of iPad applications on improvement of attention and short-term memory in mild dementia. Methods : A single-case experimental study using A-B-A design was conducted. A total of 20 sessions, including 5 each for baseline phase A and A' and 10 for the intervention phase, were provided to the subject. Interventions were only provided during the intervention phase and were iOS-based iPad applications named "Memorado-Moving Balls" and "Circles." "Fit Brains-Matching Pairs" and "Fit-Brains-Spot the Difference" were used for each session to evaluate attention and short-term memory. MMSE-K, K-TMT-e A and B, and DST assessment tools were used pre- and post-intervention to assess attention and memory. Result : Fit Brains scores indicated improvement in both attention and memory during the intervention phase. K-TMT-e A showed 3 increased correct points and 3 reduced error points, and B showed 7 increased correct points and 2 reduced error points in post-tests, but the DST and MMSE-K showed no meaningful change. Conclusion : This single-case study identified improvements in attention and short-term memory in a person with mild dementia using iPad applications. Further studies regarding different applications and larger samples with long-term designs are necessary.

• Korean Journal of Cognitive Science
• /
• v.10 no.3
• /
• pp.51-66
• /
• 1999

Selective attention induces perceptual distortions. ranging from repulsion of objects located near the attended area(Suzuki & Cavanagh. 1997) to magnification of the u unattended objects (Tsal & Shalev. 1996). Two hypothetical mechanisms have been p postulated: a shift of receptive fields' positions away from the locus of attention(receptive-field-recruitment hypothesis) or the enlargement of perceived space around the a attended location(space-enlargement hypothesis). The present study distinguished between these hypotheses by investigating the spatial and temporal properties of attention-induced d distortions. Perceptual judgements on vernier alignment. line tilt. line length were used to measure attention-induced changes in perception. Attention was induced exogenously(by blinking a specific set of dots around the test stimuli} or endogenously(by instructing the subject to selectively attend the dots). After inducing attention. the test stimuli were briefly flashed. A staircase method was used to measure the attentional effect. A vertical line was perceived as repelled from the locus of attention. and a line segment appeared longer when attention was given to its vicinity. The effects decreased as the distance between the locus of attention or the time between the onset of attention and the stimulus presentation increased. The results imply that the space-enlargement hypothesis provides a better explanation for the attention-induced changes in perception than the receptive-field-recruitment hypothesis.

• Journal of Digital Convergence
• /
• v.11 no.7
• /
• pp.237-242
• /
• 2013

When abdomen and pelvic were scanned with 128 channel MDCT, the gonadal exposure dose was measured with and without gonadal shield and the obtained images were evaluated. As a result, during abdominal MDCT scan, the gonadal exposure dose was measured $16.5{\pm}0.5$ mGy when the gonad shield was not used, and it was $7.5{\pm}0.3$ mGy when the large gonad shield($650m^2$) was used, which showed the effect of reduction in the gonadal exposure dose by 54%. During pelvic MDCT scan, the gonadal exposure dose was $9.5{\pm}0.3$ mGy when the gonad shield was not used, and it was $2.8{\pm}0.2$ mGy when the large gonard shield($650m^2$) was used, which showed the effect of reduction in the gonadal exposure dose by 70%. The images were obtained when using the gonad shield and when not using it during MDCT scan, and as a result of analyzing them with 5-point Likert scale, in the abdominal image, it was 4.1 points irrespective of whether using the gonad shield or not. And also, in pelvic scan, it was 1.2 points when the gonad shield was used, and 4.1 points when it was not used. With the results above, it is considered that during the abdominal 128-MDCT scan, by using the gonad shield, the images should be obtained without being degraded and the exposure dose must be reduced.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.2
• /
• pp.1-9
• /
• 2003

We develop an experimental system to inspect a metal mask and, in this paper, introduce its inspection algorithm. This system is composed of an ASC(Area Scan Camera) and a belt type xy-table. The whole area of the metal mask is divided into several inspection blocks. The area of each block is equal to FOV(Field of View). For each block, the camera image is compared to the reference image. The reference image is made by gerber file. The rotation angle of the metal mask is calculated through the linear equation that is substituted two end points of horizontal boundary of a specific hole in a camera image. To calculate the position error caused by the belt type xy-table, HT(Hough-Transform) using distances among the holes in two images is used. The center of the reference image is moved as much as the calculated Position error to be coincided with the camera image. The information of holes in each image, such as centroid, size, width and height, are calculated through labeling. Whether a holes is mado correctly by laser machine or not, is judged by comparing the centroid and the size of hole in each image. Finally, we build the experimental system and apply this algorithm.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.4
• /
• pp.449-454
• /
• 2010

Lately, airborne digital camera and airborne laser scanner in field of airborne surveying are used to build geography information such as digital ortho photo map and DEM(Digital Elevation Model). In this study, 3D position accuracy is compared medium format CCD camera RCD105 with airborne digital camera DMC. For this, test area was decided for aerial photograph. And using 1/1,000 scale digital map, ground control points were selected for aerial triangulation and check points were selected for horizontal/vertical accuracy analysis using softcopy stereoplotter. Accuracy of RCD105 and DMC was estimated by result of aerial triangulation and result of check points measurement of using softcopy stereoplotter. In result of aerial triangulation, RMSE(Root Mean Square Error) X, Y, Z of RCD105 is 2.1, 2.2, 1.3 times larger than DMC. In result of check point measurement using softcopy stereoplotter, horizontal/ vertical RMSE of RCD105 is 2.5, 4.3 times larger than DMC. Even though accuracy of RCD105 is lower than DMC, it is maybe possible to make digital map and ortho photo using RCD105.

• The KIPS Transactions:PartB
• /
• v.11B no.3
• /
• pp.327-336
• /
• 2004

For visual inspection system in real industrial environment, it is one of most important tasks to design fast and stable pattern matching algorithm. This paper presents an edge-based point correlation algorithm avoiding full search in visual inspection system. Conventional algorithms based on NGC(normalized gray-level correlation) have to overcome some difficulties for applying to automated inspection system in factory environment. First of all, NGC algorithms need high time complexity and thus high performance hardware to satisfy real-time process. In addition, lighting condition in realistic factory environments if not stable and therefore intensity variation from uncontrolled lights gives many roubles for applying directly NGC as pattern matching algorithm in this paper, we propose an algorithm to solve these problems from using thinned and binarized edge data and skipping full point search with edge-map analysis. A point correlation algorithm with the thinned edges is introduced with image pyramid technique to reduce the time complexity. Matching edges instead of using original gray-level pixel data overcomes NGC problems and pyramid of edges also provides fast and stable processing. All proposed methods are preyed from experiments using real images.

• Phonetics and Speech Sciences
• /
• v.16 no.2
• /
• pp.83-90
• /
• 2024

This study aimed to explore phonological retrieval and phonological memory skills in second to third graders with dyslexia, poor comprehension, and typical development. The participants included 17 children with dyslexia, 17 children with poor comprehension, and 24 typically developing children. Children with dyslexia scored below 85 on the word decoding test, poor comprehender scored above 90 on the word decoding, and below 85 on the reading comprehension test and typical children scored above 90 on both reading tests. All participants were assessed on rapid automatized naming (RAN) and nonword repetition (NWR). The result indicated that children with dyslexia performed significantly worse on RAN and NWR tasks than other groups. However, there was significant differences between poor comprehender and typically developing children. Furthermore, only RAN were significantly correlated with word decoding and reading comprehension in children with dyslexia. For typically developing children, RAN was correlated with word decoding and reading comprehension, while NWR had a significant correlation with reading comprehension. No correlations were found between these variables for poor comprehender. The finding suggests that children with dyslexia showed difficulties on phonological retrieval and phonological memory, which are essential for reading development while poor comprehender do not have difficulties with phonological processing skills. Phonological processing deficits may underlie word decoding difficulties in dyslexia.