• Korean Architects
• /
• s.653
• /
• pp.32-36
• /
• 2023

지난 3월 권영걸 위원장이 국가건축정책위원장으로 취임하며 국가건축정책위원회(이하 국건위)가 새롭게 거듭났다. 제7기 국건위는 자연친화적인 국토환경, 건강한 생태도시 구현을 목적으로 '공원같은 나라, 정원같은 도시'를 슬로건으로 내걸고, 스마트 기술을 기반으로 도시의 쾌적성을 높여 국민 삶의 질을 높이고자 한다. 국가와 사회의 과제를 건축공간적 해법으로 풀겠다는 목표다. 이를 위해 국가상징공간 조성, ESG+Art 기반 선진 생태도시 모델 제시, ICT 융·복합 기반 '한국형 건축도시' 개발, 지방소멸에 대응한 도시건축 사업 추진 등 네 가지 중핵과제를 설정, 불철주야 노력하고 있다. 지난 7월 28일 권영걸 위원장을 직접 만나 정책 방향을 물어봤다. 한편 권영걸 위원장은 이날 인터뷰에서 "8월 3일부터 협회 의무가입제도가 도입된 것을 축하드린다. 이를 계기로 건축계 의견을 하나로 모으고, 건축사들의 직업윤리를 강화할 수 있게 됐다는 점에서 건축산업 발전에 크게 기여하게 될 것으로 기대한다"고 말했다. 그러면서 "건축사들의 직업적 권위가 보호되고 스스로 국가 디자이너이자 신문명 디자이너라는 시각을 갖고 일할 수 있도록 제반환경이 조성돼야 한다"며 "협회가 그런 길을 인도할 수 있는 역할을 해주시길 바란다. 국건위도 열심히 돕겠다"고 밝혔다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.215-215
• /
• 2016

면적감소계수는 강우의 공간적 분포 특성을 반영하고자 지점강우량을 면적강우량으로 환산하는 데 사용된다. 현재 국내에서는 세 가지 방법을 사용하여 소유역의 면적감소계수를 산정하고 있다. 세 가지 면적감소계수 산정 방법은 1) 유역 전체에 같은 면적감소계수를 적용하는 방법, 2) 분할된 소유역 별로 면적감소계수를 산정하여 적용하는 방법, 3) 홍수량 산정지점 별 누가면적에 대한 면적감소계수를 적용하는 방법이다. 이들 방법은 기본적으로 호우의 중심이 항상 유역 내 특정한 지점에 고정된다고 가정하는 방법이다. 본 연구에서는 기존의 방법과 달리, 호우의 형상을 고려한 면적감소계수 적용기법을 새롭게 제안하였다. 아울러 제안된 방법과 기존의 방법들을 충주댐 유역에 대해 적용하고, 이를 비교 평가하였다. 그 결과 제안된 방법이 기존의 방법들에 비해 보다 양호한 결과를 이끌어 낼 수 있음을 확인할 수 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.217-217
• /
• 2016

강우는 시 공간적 변동성이 크고 지형특성으로 인한 지역 편차가 큰 특성을 가지고 있다. 따라서 강우 발생을 분석하는 경우, 강우의 시 공간적 변동성과 지역특성을 고려해야한다. 본 연구에서는 지역특성을 고려한 강우 앙상블을 생성하였다. 강우의 지역특성을 고려하기 위해 2010~2015년 동안 발생한 강우사상 중 서울지역을 통과하는 대류성 강우사상 30개를 선정하였다. 지역특성 고려하기 위한 매개변수로 강우강도와 풍향을 선정하고, 매개변수의 가중인자를 결정하였다. 또한 매개변수의 정량화를 위해 강우강도의 경우 대수정규분포, 풍향의 경우 Von mises분포를 매개변수의 확률분포로 선정하고, 선정된 두 확률분포에 Copula함수를 적용하여 결합확률분포를 추정하였다. 아울러 추정된 결합확률분포에 Monte-Carlo Simulation기법을 적용하여 매개변수에 대한 난수를 발생시키고, 이를 이용하여 지역특성을 고려한 강우 앙상블을 생성하였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.10-11
• /
• 2019

The purpose of this study is to validate the environmental performance of the 'eco-friendly lightweight form' in the construction process. Unlike existing euro form and aluminum form, the proposed form does not require form oil during the process of concrete casting and is lightweight because it is made of engineering plastic. Therefore, eco-friendly lightweight form will reduce the $CO_2$ emissions in the construction process. To verify the hypothesis, the study compared existing forms and eco-friendly light weight form's $CO_2$ emissions in each stage in construction process when using 1,000 forms and 100 times from the LCI(Life Cycle Inventory) data. The total $CO_2$ emissions of the eco-friendly light weight form were 30,487kg $CO_2$, which equated to about 58% and 20% less emissions than the euroform and aluminum form. The result of the study verified that the eco-friendly lightweight form was effectively reduced $CO_2$ emission in the construction process.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.143-144
• /
• 2019

Recently, environmental pollution related to global warming is on the rise. Meanwhile, renewable energy is a representative example of many efforts to develop eco-friendly energy to solve the depletion of natural resources and the depletion of petroleum resources in conjunction with global warming. Among them, photovoltaic power generation is increasing the subsidies for the government to increase the production of photovoltaic electricity of the general public, showing a high growth rate. However, polysilicon, which is a raw material of the photovoltaic panel, generates waste called polysilicon sludge in the manufacturing process. In order to produce 1 ton of polysilicon, about 2 tons of waste polysilicon sludge is generated. In 2012, polysilicon sludge was generated at 78,000 tons, with an average of about 220 tons per day. The sludge generated due to insufficient treatment of polysilicon sludge is currently solidified and is processed by landfilling. Therefore, in this study, polysilicone sludge is used as the concept of admixture, and the physical properties of the matrix according to the polysilicon sludge replacement ratio based on light burned magnesia is determined.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.93-94
• /
• 2022

Although various studies about indoor positioning systems, such as beacon and Wifi, have been conducting for indoor positioning of workers at construction sites, these systems have limitations in terms of accuracy or economics. To overcome these limitations, geomagnetic field sequence-based indoor positioning technology can be a good alternative. However, it is necessary to correct the geomagnetic field near the construction material stocking area since the geomagnetic field can be distorted near construction materials such as rebars. Therefore, this study conducted an experiment for identifying correction range of geomagnetic field near the construction material stocking area. It was analyzed that the geomagnetic field should be corrected up to 60cm in the horizontal direction from the stocking point if the height of stocking area for rebars is 40cm or more. This study can be used for important reference for development of geomagnetic field sequence-based indoor positioning technology suitable for construction sites.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.273-274
• /
• 2023

Although there are many old school buildings that is more than 40 years in Korea, it is difficult to rebuild all of them due to limitations in budget management. Therefore, objective feasibility evaluation criteria are necessary to determine which school buildings should be rebuilt preferentially among the numerous old school buildings. One of the rebuilding feasibility evaluation items, economic evaluation generally requires documents such as construction statements and facility drawings. However, because most buildings older than 40 years do not have these documents, an economic analysis model that requires only basic building information should be developed. In this study, the economic analysis model that can be used for evaluating the rebuilding feasibility only with the number of years, total floor area, and structural information of school buildings was established. This model can contribute to the objective feasibility evaluation of old school buildings because it can evaluate numerous buildings on the same criteria based on basic building information.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.123-124
• /
• 2023

Despite the acuuracy, stability, and economic feasibility of geomagnetic field-based indoor positioning, its applicability in construction sites needs to be thoroughly discussed due to the issue of distortion of geomagnetic fields around ferromagnetic objects such as rebars. In this study, the possibility of applying the geomagnetic field-based indoor positioning in construction sites was reviewed through the Student's t-test after measuring the changes in geomagnetic field values depending on the presence or absence of rebars. The statistical analysis revealed that there is a high probability (over 80%) of significant changes in geomagnetic field values when measuring points are located within 60cm from the rebars. On the other hand, the probability of minimal changes in geomagnetic field values is over 90% when measuring points are located more than 60cm from the rebars. This suggests the application of geomagnetic-based indoor positioning in construction sites would be possible if the issue of distortion in geomagnetic field values near rebars within 60cm is resolved.

• Korean Architects
• /
• s.504
• /
• pp.67-71
• /
• 2011

• Korean Architects
• /
• s.505
• /
• pp.64-69
• /
• 2011