• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.5
• /
• pp.19-32
• /
• 2012

The purpose of this study is to quantitatively measure the view target and the view area through the selection of landscape control point by selecting Jimyeong-dong Dong-gu and Yeongyeong-dong Buk-gu Daegu, which are planned as the large scale housing complex development area, as the target places. It is very meaningful that from the simulation based on this measurement, the improvement methods are attempted to be suggested at the project level. The results of this study are as follows. First, the total number of viewing targets derived from the literature analysis for the selection of the viewing targets was 24, and finally derived main viewing targets were 4 places. Second, the total number of selection criteria of the derived landscape control point was 15, and these were re-categorized as prospect, accessibility and publicness according to the common property. The preliminary LCPs were selected by measuring the publicness and accessibility, and because of the said measurement, a total of 43 preliminary LCPs were selected. The final LCPs were selected by estimating the prospect of the selected preliminary LCPs, and as a result of estimation, a total of 29 final LCPs were selected. Finally, the total number of evaluation indicators derived from literature analysis was 26. Because of the valuation by the landscape control point, it was found that the 2 view areas were the I grade, 3 areas were II grade and 3 areas were the V grade, the lowest grade among 29 view areas. From the analysis on problems for the improvement methods, 4 improvement-indicators including the diversity of land mosaic were selected for the view area-1 without considering the development project drawing. In addition, for the view area-2 with considering the development project drawing, the landscape as the scenery forests was well formed, and the arrangement of architectures for the security of view corridor was right angle arrangement, and their floor number was 10.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.1
• /
• pp.1-11
• /
• 2019

This study was conducted to analyze the conservation status by diagnostical methology for the front wall of Jungjeongdang area of Dodong-Seowon. The study was carried out as photogrammetry and mapping - investigation of materials and conservation status - analysis and evaluation of conservation status. The results are as follows. First, in the case of photogrammetry, each photograph was took in superposition, and the distortions of the photographs were corrected and synthesized. Based on this, actual survey drawings of the wall were prepared. Second, in case of material and conservation status, the wall is in the form of Wapyeondam and the material of the head part are tile, mud and lime, and the material of the body part are mud and tile. The mud was mixed with gravel, sand and straw. At the base part, amorphous natural stones and mud were used. The remarkable damage that appears on the wall is erosion of the base part, and some disintegration appears in the body part. There is a biological patina on the head and the base, and vegetation such as lichen is concentrated on the partial body. There was superficial deposit in the head part, and some tiles were broken or lost. Deep fissures are intensively located in some part of the eastern wall. Third, in the case of analysis and evaluation of the conservation status, it is considered that by the erosion of the foundation part and the disintegration of the body part, there is a possibility that physical damage will continue to be applied to the wall, so immediate action is necessary. The distribution of biological patina and vegetation does not appear to cause great problems in the wall, but it is necessary to reduce it in view of aesthetic problems. A cracked or missing tile would need to be replaced, and deep cracks in the eastern wall appear to have been caused by subsidence, and reinforcement of the underground is necessary to prevent further damage.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.3
• /
• pp.11-22
• /
• 2005

It is necessary to arrange and analyze the collected research date to get regularity such as characteristics, merits and demerits, and possibility in city when constructing land information by analyzing linkage and utilization of cadastral information as the fundamental data for land information around the acreage of a lot and by expressing the purpose of each digital data construction with map. In short, that is the work to classify data, to make chart or map, or to analyze using statistical technique. Some information in land utilization had been used by computerization, but several problems were found in common use of total divisions. The most important problem is, in the case of drawing information, that topographical map with building boundary and land registration map with acreage boundary cannot be used together. In the case of property information, common utilization of property information that is basically needed and standard measurement of usage classification are necessary. The characteristics of the land usage data by the rearrangement of the cadastral information. etc. is presented as the basic data for the land information orientation, and the analyzing result of the data should be expressed and controlled on the map as the fundamental survey for the establishment of the land information oriented planning supports the physical space planning of the land cadaster finally. In this research, the problem in establishing current land information around acreage of a lot was found to research data to be needed in land information for utilizationof space based digital information, and was studied the method in relation to GIS.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.3
• /
• pp.93-103
• /
• 2014

Regarding to the cadastral information and building information as a spatial information, studies on linking between cadastral records and building information, or integration methodology on 2D based building map and land information were proposed. Cadastral information has grown its values by cadastral resurvey project and cadastral confirmation survey. There is a tendency of BIM in the design stage which is not just simple 3D dataset and BIM is spreading in public and private sectors. However, studies on the linkage between building information and cadastral information is relatively weak comparing to the BIM spreading. One of the main features that have been improved in IFC4 is the interoperability with GIS. In this regards, the researcher propose several revision methods to link cadastral information to building information. Cadastral information needs to improve the quality of the dataset's such as unifying the different coordinate systems and preparing continuous cadastral map. For buildings, standardization of BIM in the public and private sectors is urgent task. IFC4 and upcoming IFC5 are international standards which need to be considered and BIM reverse engineering for the existing buildings is necessary for the public utilization in the near future.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.100-107
• /
• 2001

A Interior material, a main cause of fire-growth and generating toxic gas when it burns, should be dealt with great care in life safety design. Nonetheless, it has been used recklessly with undue attention to its contribution to fire in particular in entertainment occupancy and causes many victims in fire. Therefore, this study attempts to examine the current use of interior material in Korea and find out what to be improved and enhanced in terms of related regulations. Based on the comparison and analysis of the Korea regulation with those of advanced nations, suggestions are made for an effective and efficient improvement and complement to the current system. What can be suggested from this study are as follows. The use of interior material should be controlled under the unified regulation of fire-safety codes. Code should be set up so that the current construction enforcement should be applied in retroactive to those entertainment buildings that obtained a license prior to the implementation of the system certifying that the building is fire-resistant and fire-protective. The legislation should be made to control the fire-protection facilities of small-sized, underground entertainments. It should be obliged to present the blueprint displaying the use of interior material at the time of changing occupancy. Or, it should be compelled to report changes that go way without permit to the administrative office. A compulsory provision should be set up to have a fire-resistant performance to movable furniture. The classification index designating the fire hazard of interior material by flame spread rate and smoke toxicity and its test method should be established.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.245-251
• /
• 2004

Recently, in a field of cadastre, a computerization of cadastral map is in progress with great growth of GSIS field. Also, the needs fer the integration of land and building information are widely increasing for integral-management and its application of various land related information. Through a revision of cadastral laws to replace the existing 2D-Cadastre with the 3D-Cadastre, a legal basis to register the position of buildings and facilities is prepared in the governmental or civil fields. This paper presented 3D-Cadastre theory that has been studied on Europe and surveyed building position directly with Totalstation at cadastral control point after choosing pilot test area, Also, the most efficient surveying method of registering building in a cadastral map is presented with comparing and analyzing building position after surveying digital orthophoto and digital map. And it is constructed a 3D information cadastral map model that can make the integral management of land, building, connecting land recorders, building management ledgers, building titles, building pictures, and related attribute information.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.4
• /
• pp.128-138
• /
• 2014

Development of infrastructure component libraries is a critical requirement for the accelerated adoption of BIM in the civil engineering sector. Libraries reduce the time for BIM model creation, allows accurate quantity take offs, and shared use of standard models in a project. However, such libraries are currently in very short supply in the domestic infrastructure domain. This research introduces library components for retaining walls and box culverts generated from 2D standard drawings made publicly available by MOLIT. Commercial BIM software was used to create the concrete geometry and rebar, and dimensional/volumetric parameters were defined to maximize the reuse and generality of the libraries. Use of the these libraries in a project context demonstrates that they allow accurate and quick quantity take offs, and easier management of geometric information through the use of a single library as to numerous 2D drawings. It also demonstrates the easy modification of the geometries of the components if and when they need to changed. However, the application also showed that some of the rebar components (stirrups and length wise rebars) do not get properly updated when concrete geometries are changed, demonstrating the limits of current software applications. The research provides evidence of the many advantages of using BIM libraries in the civil engineering, thus providing the incentive for further development of standard libraries and promoting the use of BIM in infrastructure projects.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.2
• /
• pp.98-108
• /
• 2010

The purpose of this study was to analyze the monumental expression of Korean War Memorials(KWM) in Korea(KWMK). Through site survey and internet searching, the researcher selected 17 KWMK and analyzed four analysis categories: contents, spatial form, landscape elements, sculptures and architectural elements. The results are as follows: 1. The analysis revealed that main contents of KWMK were to cherish victims of the Korean War, honor military merit, and explain Korean War. 2. Most KWMK built battlefield had the form of symmetry and spatial axis arranged monuments and sculptures for solemnity and heroism. Though the sites were terraced by traditional spatial order, spatial sequence wasn't seen except Yang-gu KWMK and Chumomyeongbi in United Nations Memorial Cemetery in Korea. 3. Stone monument-like towers, tablets, podium, monoliths, cenotaphs, and exhibit halls to explain Korean War and combat history were used as main elements of KWMK and also, war weapons were often displayed the flags of countries taking part in Korean War were raised with Taegeukgi and the United Nations flag. 4. Most sculptures were used as important media to represent the Korean War and assumed realistically the form of heroic combat. But a few architectural memorial built in recent were designed in contemporary style to have spatial sequence and represent Korean War symbolically and narratively. 5. In memorial culture, KWMK were strongly influenced by ideology and patriotism, impacted by conventional value, and designed by some sculptors and designers in a certain circle. Further study will be required to analyze the characteristics of KWMK in the point of design style and diachronic.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.3
• /
• pp.71-80
• /
• 2019

The Fourth Industrial Revolution, centered on intelligence and information, began to take hold in 2016. This study uses virtual reality technology, which is the most popular technology of the Fourth Industrial Revolution. The purpose of this study is to explore a Virtual Walk-through method, which can be easily applied to landscape architecture. At present, virtual reality technology is widely used in the fields of games, emergency training, and architectural design. However, in the field of landscape architecture, it is still in the development stage. In addition, most of the traditional ways to display virtual reality use 2D images, but such methods have some limitations. Therefore, this research addresses the three stages of "design-exhibition-experience" and puts forward a new simple method called 'Virtual Walk-through' that breaks from traditional landscape design exhibitions. The results show that compared with traditional methods, virtual reality has many advantages, such as the freedom of experience, a diversity of viewing angles, information supply, interaction, etc. It can show high quality images and effects, which are suitable for landscape design. It provides an evaluation method for garden design that can be utilized in the future. It is simple and has value as it can reflect the method and the expected effects. Virtual reality technology can bring an infinite number of prospects to the development of landscape architecture.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.653-659
• /
• 2018

The accurate prediction of construction cost is a key factor in a project's success. However, it is hard to predict the construction costs in the planning stages rapidly and precisely when drawings, specifications, construction cost calculation statements are incomplete, among other factors. Accurate construction-cost prediction in the planning stage of a project is also important for project feasibility studies and successful completion. Therefore, various techniques have been applied to accurately predict construction costs at an early stage when project information is limited. There are many factors that affect the construction cost prediction. This paper presents a construction-cost prediction method as multiple regression model with seven construction factors as independent variables. The method was used to predict the construction cost of a local housing union project, and the error rate was 4.87%. It is not possible to compare the cost of the project at the planning stage of the local housing union project, but it has high prediction accuracy compared to the unit price of an existing unit area. It is likely to be applied in construction-cost calculation work and to contribute to the establishment of the budget for the local housing union project.