• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.380-383
• /
• 2004

Recently, by the growth of IT industry, the domestic construction is tried to spread with IT on the whole phases: 1)an, design, order, construction, and maintenance. On this, in the construction industry, is accelerated effort of the introduction of PMIS, it has various types of PMIS applied which is developed alone by large construction company and serviced with web-hosting by ASP corporation. In this study, through the analysis of PMIS which has applied on the subway construction in the D city, try to propose the improvement proposals and put out realistic problems. Therefore that analysis about needs of the order and operation of the phases, Domestic PMIS cases and International PMIS technique position have to consider and, the system is analyzed to needs of the order, design scheme, and utilization. On the basis of this result, the improvement proposals is proposed into the case of the contract, the system, the operation, the management and the contact of the external system.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.4
• /
• pp.359-370
• /
• 2022

Despite continuous efforts to reduce on-site safety accidents, the construction industry remains a high-risk sector with a high rate of fatal accidents. Design for Safety(DFS), which manages safety risk factors at the design stage, is being used as a method to lower the construction safety accident rate. However, due to limited knowledge, designers are unaware of the design-results risks during the different of the project lifecycle, including construction, operation, and maintenance. Effective DFS can be conducted if the designer understands the effect of the building shape on the safety accident rate and corresponding safety management cost(SMC). The cost of safety facilities such as fall prevention nets and safety fences will vary depending on the shape of the building. This study analyzes the outer perimeter length's impact on SMC. Following the data collection from 21 projects for this study, an analysis was conducted using the independent variables of the building perimeter(BP), building shape factor(BSF), and building area(BA), the dependent variable of SMC. The correlation R2 was found to be 0.876, 0.801 and 0.792 between the BP and SMC, BSF and SMC, BA and SMC, respectively, indicating that these factors were closely related.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.475-481
• /
• 2019

The importance of performance-based design feedback is being emphasized when it comes to the potential impact that affects all the lifecycle of the building. However, the latency and disconnection of domain expert in the sector of AEC/FM remain current obstacles between design and performance feedback. It is hard to utilize performance feedback information for design exploration and support design decision making during the conceptual phase of design. Using parametric design, this paper proposes various design alternatives from a set of rules and constraints defined by algorithms for the geometric configurations of an Office Building. A Building Performance Analysis (BPA) was to developed using Autodesk® Revit® 2019 which integrates Autodesk® Green Building Studio® to predict its sufficient daylighting conditions of the LEED v4's Daylighting Autonomy (DA). The parametric-based performance feedback of this study outlines potential design improvements for further exploration in application to the early design process.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05b
• /
• pp.67-70
• /
• 2011

The effect of column shortening is a major consideration in design and construction of tall buildings, especially in concrete and composite structural systems. To avoid unexpected demage in structural and nonstructural elements, differential shortening between vertical members resulting from differing stress levels, loading histories, volume-to-surface ratios and other factors in a high-rise building must be properly considered in the design process. This paper represents analyzed and measured shortening results of RC cores and columns at the 72 story Haeundae I'Park. It shows that WACS program based on ACI and PCA material model is effective for the prediction of column shortening.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.2
• /
• pp.68-74
• /
• 2007

It has been recognized that safety management is activated during the construction phase to prevent accidents and fatalities of workers. However, It is revealed that about 15% of fatal death accidents is caused by the lack of management of planning and design phases. There is a crucial need of assessing safety risk during building design phase. This paper is aimed to develop a safety risk assessment checklist that can be used during building design phase, utilizing the concept of Design for Safety. In doing so, a broad literature survey on safety management of building Process, various safety risk assessment toolboxes being utilized in the HSE and the BAA of UK. The proposed checklist contains the followings: 1) classification structure for safety design on space, element, and trade work 2) hazard risk factor, probability and degree of intensity of accident occurrence, and 3) safety assessment criteria. It is expected that the checklist would be an effective tool of preventing and minimizing fatal accidents of building construction projects.

• Journal of the Korea Institute of Construction Safety
• /
• v.3 no.1
• /
• pp.25-31
• /
• 2020

While the disaster rate in all industries has been on a steady decline over the past decade, the accident rate in the construction industry has been on the rise, and it is urgent to improve it. The purpose of this study is to compare and analyze domestic design safety review system with overseas cases to derive problems of domestic design for safety review system and find ways to improve it. Like U.K and Singapore, it should be reviewed from the beginning of the working design, and Safety reviews should be conducted not only in large-scale construction but also in small-scale construction to reduce construction industry disasters. In particular, it is necessary to prepare a system for the lack of related systems, and the Design for safety system is meaningful in that it is an expansion of the spectrum from operator-centered safety management system and requires sufficient improvement and research in the future.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.1
• /
• pp.307-314
• /
• 2018

It became clear that Korean peninsula is not a safe region anymore from an earthquake disaster after Gyeongju and Pohang Earthquake in 2016-2017. Unfortunately, building industry in Korea has not been well prepared for an earthquake disaster and the following problems exist. First, the rate of buildings with proper seismic performance is relatively low. Second, the number of piloti buildings which are vulnerable to earthquake and fire disaster has increased recently. Third, the proportion of small-scale buildings excluded from the application of the building law for securing safety is too high. Fourth, widespread corruption and poor construction impede safety. Therefore, measures to prepare for earthquake disaster are as follows. First, methods of reinforcing building structures and reducing the seismic load acting on a building should be utilized in order to secure the insufficient seismic performance of buildings vulnerable to earthquakes. Second, whistleblowers should be encouraged and protected to prevent defective construction due to corruption. To this end, whistleblowers should be recognized as an effective means of protecting public interest not the traitor to the organization.

• 월간 기계설비
• /
• s.237
• /
• pp.80-84
• /
• 2010

국내의 기계 및 설비관련 학과는 모든 산업의 기초가 되는 기계를 다루는 기술인이 반드시 알아야 할 기계관련 이론과 다양한 실기를 통해 산업현장에 필요한 전문직업인 양성에 교육 목표를 두고 있다. 또한 오늘날 첨단 기계 산업의 발달 및 다양화에 따라 생산 및 생산시설 관리, 제품 설계 및 제작, 엔지니어링 마케팅, 컴퓨터 하드웨어 및 소프트웨어 관련 업무를 충실히 담당할 중견 전문가 양성도 담당하고 있다. 본지는 지난해 3월호부터 이번호까지 총 14회에 걸쳐 전국의 기계 및 설비관련 학과를 소개했다. 건축물이 첨단화 다양화 되면서 기계설비의 비중이 점차 커짐에 따라 각 대학들은 다양한 커리큘럼을 마련해 전문성 향상은 물론, 개별 경쟁력 확보를 위해 자격증 및 어학 등을 강화함으로써 21세기가 요구하는 미래의 기계설비인 양성을 위해 노력하고 있음을 엿볼 수 있었다. 본지는 이번호를 끝으로 기계설비 관련 대학 탐방을 마친다. 그동안 취재 및 원고 작성에 협조해주신 대학 관계자 여러분께 감사드린다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.513-522
• /
• 2011

This study has done to extract the characteristics of contemporary urban design idea for waterfront industrial-logistics city through the comparative analysis on the 5 prize winning pieces which had submitted for "The Competition of Urban Concept for the Busan River City" by leading urban architectural designers who have futuristic and international vision. Following the analysis on design guideline with the 5 categorical subject (concept, land use, transportation, residencial area, open space), the characteristics and differences of each design are summarized. The result can be utilized for the waterfront planning and design including new town project.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.273-283
• /
• 2014

With the introduction of COBie (Construction Operation Building Exchange) in BIM technology enabling an automatic transfer of design and construction information to operation and management (O&M) phase, the BIM centric O&M management system development process has been tested on the subject of architectural types of building. However, for now, there is a need to investigate the technical feasibility of COBie application to civil structures including industrial facilities. This study takes both "O&M Guideline for Public Wastewater Treatment Plant" and a real wastewater treatment plant into account for the purpose, in which the latter is intended to supplement the result of the first. The findings are three-folds: (1) COBie, as an asset modeling, is not sufficient enough to encompass commissioning data, (2) more relevant IFC development and family library build-up useful to modeling wastewater treatment plant is imperative, and (3) well-planned coordination and organization of COBie data-set in line with O&M practice will enhance the feasibility of the COBie in industrial facilities. The result could be used for a basis study for COBie application, particularly in industrial facilities.