• KIPE Magazine
• /
• v.27 no.3
• /
• pp.49-53
• /
• 2022

우리나라의 백색가전 산업은 1960년대 말 시작된 이후 현재에 이르러는 국내는 물론 전 세계 시장에서도 높은 점유율을 기록하고 있다. 3대 백색가전 제품인 세탁기, 냉장고, 에어컨 기준 연간 수천만 대에 이르는 국내 가전 업체들의 생산량을 고려하면, 백색가전 산업에서의 모터 및 인버터 생산량은 타 산업 대비 압도적인 수량이다. 세탁기, 냉장고, 에어컨뿐만 아니라 건조기, 청소기, 식기세척기 등 거의 모든 가전제품에서 1개 혹은 그 이상의 모터들의 구동으로 제품의 주요기능들이 작동되고 있으므로 모터 및 모터 드라이브 기술은 제품의 성능과 가격 경쟁력을 결정하는 중요한 부분이라고 할 수 있다. 본 글에서는 백색가전 제품의 주요 제품군들 내에서 사용되고 있는 모터 드라이브 기술의 특징을 소개하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.58-65
• /
• 2016

This study was a preparatory experiment aimed the development of membrane scaffolds for tissue engineering. A PCL composite solution contained sodium chloride(NaCl). PCL porous membrane scaffolds were formed on a glass casting plate using a film applicator and immersed in distilled water to remove the NaCl reaching after drying. NaCl was used as a pore former for a 3 dimensional pore net-work. The dry condition parameters were $4^{\circ}C$, room temperature (RT) and $40^{\circ}C$ for each different temperatures in the drying experiment. SEM revealed the morphology of the pores in the membrane after drying and evaluated the in vitro cytotoxicity for basic bio-compatibility. The macro and micro pores existed together in the scaffold and showed a 3-dimensional pore net-working morphology at RT. The in vitro cytotoxicity test result was "grade 2" in accordance with the criterion for cytotoxicity by ISO 10993-5. The dry condition affected the formation of a 3 dimensional pore network and micro and macro pores. Therefore, these results are expected provide the basic process for the development of porous membrane scaffolds to control degradation and allow drug delivery.

• Korean Journal of Food Science and Technology
• /
• v.40 no.3
• /
• pp.303-310
• /
• 2008

This study was performed to verify the effects of encapsulation against oil oxidation. Thiobarbituric acid (TBA) values of samples were compared during storage at $60^{\circ}C$, indicating that the encapsulated avocado oil had lower TBA values than the free avocado oil. Microcapsules consisting of a whey protein isolate (WPI)-only wall system had slightly improved oxidative stability; however, spray-dried particles containing a high proportion of maltodextrin (MD) clearly offered better protection from oxidation than the other forms of encapsulation. The chlorophyll (Chl) content of the encapsulated avocado oil was higher than that of the free oil sample. When compared to the control, all wall systems protected the change of the chlorophyll content storage. No large differences were observed between the encapsulated powders according to the various wall materials. The color of the encapsulated oil changed from green to yellowish-green, indicating the formation of pheophytin from chlorophyll. The yellowish color of the oil correlated with a reduced total Chl content. In conclusion, encapsulation with spray drying for avocado oil could lead to improved stability during storage with respect to oxidation and the preservation of chlorophyll.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.564-568
• /
• 2008

This study was conducted to investigate the effects of dietary Hewer's dried grain supplementation on growth performance and digestibility in growing pigs. A total of forty-eight pigs (19.3 kg, average initial body weight) were used during 42 days. Dietary treatments included: 1) CON (basal diet), 2) BDG5 (basal diet + 5 % brewer's dried grain) and 3) BDC10 (basal diet + 10 % brewer's dried grain). Each treatment had 8 replicates of 2 pigs per pen in a randomized complete block design. Growth performance was not affected by treatments. However, in nutrient digestibility, DM digestibility was higher in BDG5 treatment than CON and BDG10 treatments. Nitrogen digestibility was the highest in BDG10 treatment and among another treatments, also, BDG5 treatment was higher than CON treatment. And, energy digestibility was higher in BDG10 treatment than CON treatment. In conclusion, dietary brewer's dried grain supplementation is not reduced on growth performance and improved on nutrient digestibility.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.685-691
• /
• 2022

This study was based on the steel composite concrete box structure (Transfer girder) which was installed to support the skyscrapers directly above the subway line. In this study, it was analytically proved that the cause of cracks on the steel composite concrete box structure were the shrinkage cracks by comparing the results of crack investigation and numerical analysis. As the results, it was found that the internal temperature difference between concrete and steel members occurred according to the shape of the steel frame embedded in concrete, the location of vertical stiffener, and the closed section area. The narrower spacing of vertical stiffener was occurred the internal temperature concentration of the structure and the temperature difference increased. And the location of higher thermal strain and temperature were similar to the location of actual cracks by the visual inspection. Therefore, the internal temperature concentration parts were formed according to the presence and spacing of the vertical stiffeners and the inspection passage in the central part of the structure. The shrinkage cracks were occurred by the restrained of temperature expansion and contraction of the concrete. As the results of this study, it was important to separate and manage the non-structural cracks caused by shrinkage and the structural cracks in the maintenance of serviced steel-composite concrete structures.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.32 no.4
• /
• pp.57-63
• /
• 1995

극지개발을 위해서는 극지의 혹독한 자연환경을 대상으로 하는 과학지식과 극지에서 사용되는 특수시설과 장비를 설계, 시공 그리고 운용하는 공학기술이 요구된다. 극지관련 공학기술은 저 온용재료 관련기술, 도로나 교량, 건축물과 같은 극한지 천연자원의 시추와 생산, 수송을 위한 해양구조물과 파이프라인 관련기술, 그리고 얼음의 재료특성에 관한 이론 및 실험으로 크게 구 분할 수 있다. (Table 1). 극지용 구조물과 빙해항행선박 (쇄빙선) 은 일반 해역에서 운용되는 구조물에 비해 형상, 구조강도, 의장, 저온특수설비 등에서 새로운 개념의 기술이 요구되기 때 문에 금후 국내 조선해양산업계가 지향해야 할 고도의 기술집약형 건조물이다. 또한 최근 들어 국내에서도 시베리아 천연자원의 해상운송을 위해 빙해역을 운항할 수 있는 유조선이나 일반 화물선을 확보해야할 필요성이 대두되고 있으며, 또한 국내 조선업계의 생산기술이 비약적으로 발전함에 따라 외국으로부터의 빙해항행선박의 수주도 이루어지고 있으나 아직 이들 선박의 설계를 위한 독자적인 기술은 미흡한 현실이다. 극지개발은 이론적 접근과 함께 실험에 의한 신뢰성 있는 자료를 축적해야 한다. 이를 위해서는 빙해수조(,ice model basin)의 건조나 빙역학 실험을 위한 냉동실험실 (cold room)의 건립을 위한 초기투자가 절실히 요구되며 산업계의 수 요에 따른 포괄적인 산학협동연구가 진행되어야 할 필요가 있다. 빙해수조와 냉동실험실은 빙 해역에 직접 접하지 않은 국가에서 극지공학 연구에 참여하기 위한 필수적인 시설인데 table 2에 대표적인 빙해수조의 설치장소와 규모에 대하여 정리하였다. 이 글은 우리 나라가 쉽게 접할 수 없는 극지환경을 이해하고 가까운 장래에 예상되는 수주경쟁에 대비하여, 국내외의 극지개발 동향을 분석하고 이에 대한 국내의 극지관련 연구의 현황과 앞으로의 전망을 살펴보기 위하여 준비된 것이다. 이 글에서는 극지공학 일반보다는 조선해양분야에 관련된 내용만으로 국한한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.754-755
• /
• 2015

Computer Vision Syndrome(CVS) is a temporary condition resulting from focusing the eyes on a computer display for protracted, uninterrupted periods of time. To prevent CVS, you have to blink your eyes frequently, also have to keep distances from monitor. In this paper, real-time notification system for preventing CVS by checking user's distance between eyes and monitor and user's frequency of nictation in real time through monitor webcam is described.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.05a
• /
• pp.579-587
• /
• 2003

A lot of VOCs that is noxious ate exhausted at drying process of enamel coating device. This VOC gas can be incinerated perfectly through catalytic combustion, and heat that is occurred in incineration process ran be again used in drying process. By using VU catalytic combustion technology, in this study, we developed a enamel coating machine that have an excellent environment improvement and energy saying effect. As basic research for this development characteristics ana performance of catalytic combustion for VOC gas was evaluated and numerical analysis for drying oven was calculated. According to the result, VOCs combustion characteristics of metal form catalysis was excellent in high temperature, and it was seen that enamel coating machine should be designed as a precious controllable structure of recirculating supply rate and suction rate.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.785-788
• /
• 2014

Even though Korea is No.1 shipbuilding country around the world, there have been a lot of accident and man-made calamity incurring in shipyards these days. Therefore most of Korea major shipyard and mid-small size shipyard deeply agonize about safety management countermeasure. As a result of it, many shipyards pour their effort on developing man watching system, PF wireless communication system, portable measuring system to prevent from accident such as fire, suffocation incurring. In this paper, analyze conventional accident & man-made calamity preventing system adopted by most of shipyard and enable the user to watch accident for 24 hours and notify it to user when it is incurring through state of the art ICT technology. And as a result of it the user can prevent the accident and man-made calamity at the beginning.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.9
• /
• pp.35-41
• /
• 2022

The moisture content of many inorganic sludges is less than 70% during dewatering. Hence, a mono or piston pump cannot feed the sludge dryer. Thus, most inorganic sludge should be moved to a landfill or recycled directly without any reduction method. This development was invented to apply cyclone dryers using air and specially designed for the continuous injection of sludge sources by negative pressure and high air velocity for low moisture inorganic matter. Therefore, wastewater sludge and raw water treatment sludge discharged from various industrial fields might be settled by this development. The cyclone dryer was commercialized useful as moisture reduction equipment. This development was applied using a sludge injection system for sludge feeding and under the cooperation of ejector design computational fluid dynamics. Furthermore, this paper presented good ejector model results, blowing an airflow of 264 m³/min at an actual performance test.