• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.258-273
• /
• 2008

For being recent high oil price age, the interest in superheated steam drying technology is increasing as the method to enhance the energy efficiency of drying process consuming a lot of energy. This technology uses the superheated steam as drying medium to dry the materials and has advantages that can save the energy by recycling the evaporated high-temperature steam, enhance the quality of dried products, and minimize the exhaust of environmental pollution materials. In this work, it has been introduced from general drying principle to the principle and related studies of drying technology using superheated steam, using examples of superheated steam with dryer types, and industrial applications.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.13 no.3
• /
• pp.25-43
• /
• 1976

조선소(造船所)를 기획(企劃)함에 있어 우선 수행(遂行)해야 할 일은 선박시장분석(船舶市場分析)이다. 이에 따라서 건조대상선박(建造對象船舶)을 선정(選定)하게되고 적정작업량(適定作業量)을 결정(決定)하게 되며 Layout 작업(作業)에 들어갈 수 있다. 조선소(造船所) Layout 작업(作業)에서는 건조기술(建造技術)과 밀접(密接)한 관계(關係)를 지어 건조과정(建造過程)의 Network에서 Outlined Layout를 구(求)한다. 각(各) Work stage별(別) Detailed layout는 채택(採擇) 하려는 건조기술(建造技術)과 그 Stage의 물동량(物動量)에 따라서 결정(決定)지어진다. Layout의 마지막 단계(段階)는 이 Layout된 조선소(造船所)에서 건조(建造)하고자 하는 선박(船舶)의 추정건조선가(推定建造船價)와 현재(現在) 선박시장(船舶市場)에서의 선가(船價)와의 비교(比較)에 의한 Layout의 경제성(經濟性) 평가(評價)가 되겠다. 조선소(造船所) Layout는 단순히 Layout 작업(作業) 만으로는 수행(遂行)할수없고 건조(建造)하고자 하는 선박(船舶)의 개발작업(開發作業)과 병행(竝行)되어야 한다.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.12
• /
• pp.821-827
• /
• 2012

Air drying is a technology to dry sludge at the ejector and multi cyclone as intaking and blowing air from outside. So, this technology has a weak point that operating fluctuation is large according to an outside conditions as well as energy consumption is also large due to open loop structure. This is to develop the closed-loop air drying system to be built the dehumidifier consisted of condenser, cooler and compressor at rear side of separator of air dryer, as a way to solve some problem. Air is circulation by the method of blowing-drying-dehumidifying-blowing within this system. It is analyzed that an air circulated at closed-loop air drying equipment contains the energy of 50% more compared with open-loop air drying and is operated regularly because of quality maintenance of air to dry sludge. And also it is analyzed that the cost of drying sludge of 1 ton by closed-loop air drying equipment is lower about 35% than conventional equipment. Therefore, this is evaluated by useful drying technology to face an unexpected climatic conditions due to regular operation as well as low energy consumption.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.4
• /
• pp.258-263
• /
• 2022

This experiment was conducted to confirm the possibility of manufacturing artificial Italian ryegrass hay using far-infrared rays in Korea. The machine used in this experiment was a far-infrared ray dryer capable of adjusting temperature, airflow, and far-infrared radiation, and was conducted on Italian ryegrass harvested in May. Conditions for drying were performed by selecting a total of nine conditions, and each condition was set to emission rate of 42 to 45%, and the internal temperature was set to 65℃. The speed of the air flow in the machine was 40-60 m/s, and the overall drying time was 30 minutes for 42% radiation, 25 minutes for 43% radiation, and 20 minutes for 45% radiation. The final dry matter content according to each drying condition was 88.5% on average, and the dry matter content suitable for hay was shown in the all treatment. Looking at the power consumption according to the drying conditions, the lowest was found in the treatment that dried for 20 minutes at 45% radiation. In the drying rate, there was no difference in drying conditions 1 to 5, but a significantly low tendency was shown in conditions 6 to 7. In terms of feed value, CP and IVDMD were higher than raw materials in most drying conditions, and ADF and NDF contents were low, and tended to be high in drying conditions 4, 7, and 8. Through the above results, it was judged that drying conditions 7 and 8 were the most advantageous when considering drying speed, power consumption, and quality.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.4
• /
• pp.460-469
• /
• 2010

In spite of the global-class aquaculture and fishing technology of our country, the processing technologies are lags behind the other nations relatively. The processed marine products are mainly frozen foods, canned goods, salty food (fermented fish products), fish paste products (boiled fish paste), and we can see that the high-value dehydrated foods by drying are very few. These problems are considered to be caused directly by the lack of drying technologies. This paper is concerned to the experimental results of drying heat transfer characteristics for the green energy type vacuum dryer for the high quality sea foods production.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.58-66
• /
• 2016

This study was performed to investigate drying characteristics and quality properties of dried persimmon with vacuum drying process. Drying characteristic curve of the dried persimmon showed that the constant rate drying period and falling rate drying period exist definitely. $_{\circ}Brix$, sugar content and hardness value of the dried persimmon increased as the vacuum pressure and heating temperature increased, but L value of the dried persimmon lower. The results indicated that the optimal conditions were at vacuum pressure of 40~50kPa abs., heating temperature of $30^{\circ}C$ and drying time of 3~4days.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.258-258
• /
• 2013

최근 건조 제품의 양질화, 고급화 및 편의화가 요구되어 이를 충족시키기 위한 새로운 건조방법이 계속 개발 되어 왔다. 이러한 방법들 중에서 저온과 진공하에서 건조가 이루어지는 진공 동결 건조는 가장 완벽한 건조 방법으로 최근 실용화 되고 있다. 진공동결건조란 건조의 한 종류로 수분을 함유한 시료를 동결시킨 후 진공펌프를 이용하여 수증기압을 3중점 이하로 낮추어 얼음을 직접 증기로 만드는 승화의 원리에 의해서 얻어진다. 분무진공동결건조의 특징은 (1) 물리적구조의 보존성, (2) 화학적인 안정성, (3) 생물학적인 활동의 보존성, (4) 제품의 높은 복원성 및 재생성이다. 따라서 분무진공동결건조 기술은 크게 진공, 분무, 동결, 건조, 멸균 등과 같은 요소기술의 복합기술이라 할 수 있다. 분말을 제조하기 위해서 진공동결건조 후 분쇄하는 방법을 사용하나 본 방법에서는 정밀화학품 제조를 위해서 분무진공동결건조 방식을 사용한다. 이를 통하여 적당한 크기인 5~10 um의 입경 제조가 가능하고, 공기동력학적인 입경이 기존 방식에 비해 작아서 허파까지의 운반효율이 1.5~2배 우수하다. 화학, 의학 분야에서의 분무동결 건조는 주로 민감한 제품, 즉 생물학적 고유성의 손상 없이 물을 제거하는데 사용되어 영구적으로 저장 가능한 상태로 보관할 수 있으며 물의 첨가로 원상태로 복구할 수 있어서 매우 각광을 받고 있다. 의약용 냉동건조 제품은 항생물질, 박테리아, 혈청, 백신, 검사 약물, 단백질을 포함하는 생물공학 제품들, 세포, 섬유, 화학제품 등이 있으며 주로 vial 또는 ampule 상태로 건조가 이루어진다.본 연구에서는 원료를 $-194^{\circ}C$의 액체질소에 분무시켜 동결된 미립자를 형성한 후 진공 및 저온상태에서얼음의 승화(sublimation)에 기반한 1차 건조와 수증기 탈착(desorption)에 기초한 2차 건조 과정으로 구성된 분무진공동결건조기를 개발하였다. 분무동결 과정의 해석을 통해 2유체식 노즐을 통해 분무된 미세 입경의 액적이 액체 질소 표면까지 도달하는 회수률, 분무 노즐의 위치, 운전 조건 및 용기의 설계의 최적화를 수행하였다. 초기 액적속도, 분무노즐의 높이, 흡입구 추가에 따른 액적 유동 및 회수의 특성을 제시하였으며 이를 통한 분사시스템 고도화 가능성을 제시하였다. 구형의 미세 입자가 적층된 제품의 동결건조 공정의 해석은 흡착승화 모델(sorption sublimation model)을 기반으로 다음과 같은 열전달, 물질전달, 상변화 모델을 고려하여 유도되었다. 분무노즐 및 냉동/진공 배기계 시작품을 개발하여, 표면의 고다공도를 갖춘 입경 3~20 m 정도의 시료를 얻을 수 있으며, 동역학적 입경 5 m 충족함을 확인하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.6023-6028
• /
• 2013

Recently, biodegradable polymers are gaining more and more attention due to international environmental issues. Succinic acid is synthesised by chemical process of hydrogenation. Succinic acid synthesized has certain amount water content. To remove the water contained in succinic acid is used generally by hot air drying process. But recently, microwave drying process having the advantage of shortening the drying time and uniform drying of product are gaining more attention. In this study, hot air drying and microwave drying efficiency were compared at drying process. In addition, we confirmed commercial applicability in microwave drying process of succinic acid. Microwave drying process has higher efficiency than 70% compared with hot air drying process at thickness of 1cm. Economic efficiency were compared through examination of power consumption for complete drying of succinic acid at microwave and hot air dyring.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.882-884
• /
• 2009

본 연구는 주형의 형상에 관계없이 균일한 건조성능을 가지는 장치의 도입을 목적으로 Microwave를 이용한 주형건조장치 개발을 위한 기초 연구에 관한 것이다. 건조 성능의 검토를 위해 진공건조기와 Lab-scale의 Microwave 출력장치를 가지는 Microwave oven을 이용하여 주물사의 무게별, 건조시간별 건조효율을 검토하였으며, $CO_2$주형법에서 물유리의 양과 $CO_2$통기시간에 따른 주형의 압축강도를 측정하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.178-180
• /
• 2008

세라믹 건조기를 개발하기 위하여 탄화규소가 주원료로한 세라믹 발열판을 제작하여 건조기 내부에 설치하여 실험하였다. 발열판 장착위치에 따른 실험결과 위치는 큰 변수가 되지 않았고, 발열판 자체 온도 분포를 측정한 결과 시간이 흐름에 따라 온도 분포는 약간의 차이가 있기는 하지만 대체적으로 균일한 분포를 나타내었다.