• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.1
• /
• pp.41-48
• /
• 1999

This experiment was carried out to determine the effect of the silage additives on improvement of quality of fresh rice straw silage using round bale at the forage experimental field, grassland and forage crops division, National Livestock Research Institute, RDA, Suwon from 1997 to 1998. The experiment was arranged in a randomized block design with three replication. The treatments used in this study were consisted of different additives(control, formic acid, molasses, molasses+urea and inoculant). The rice straw silage with molasses+urea treatment resulted in high crude protein content and in vitro dry matter digestibility were increased with molasses of inoculant treatments compare with the control. The mean dry matter of formic acid treatment material was higher than with control but there was no significant difference in dry matter content among the additives treatments. The pH of molasses treatments significantly increased the proportion of lactic acid(P<0.05) and decreased the proportion of butyric acid. The total organic acid content of all treatments had low around 2%. Ammonia-N of molasses+urea treatment was significantly(P<0.05) higher than that of others, but formic acid or inoculant treatments was lower below 10% per total nitrogen. Over a 7d feeding period, the dry matter intake per cattle on the inoculant treatment was higher that on both the untreated round bale silage of fresh rice straw and rice straw hay. Producing cost per kilogram of round bale silage of fresh rice straw was decreased according to the increasement of harvesting area. It is suggested that application of round bale silage system to fresh rice straw with molasses or inoculant was the best treatment for improving preservation as silage, and that animal intake was enhanced by addition of inoculant to fresh rice straw.

• Horticultural Science & Technology
• /
• v.29 no.4
• /
• pp.358-365
• /
• 2011

Lespedeza cuneata G. Don is a plant commonly grown in Asian countries, which has been widely used as an oriental medicinal herb to treat diabetes, diarrhea and various other inflammatory diseases. The phenolics of dry leaves of L. cuneata G. Don were extracted by using 80% (v/v) aqueous methanol in assistance with homogenization and sonification. The phenolic extract and its five different fractions (n-hexane, chloroform, ethyl acetate, n-butanol, and water) were used to evaluate the levels of total phenolics, total flavonoids, and antioxidant capacity as well as the inhibitory effect of tyrosinase activity. Ethyl acetate fraction (1 g) had the highest levels of total phenolics at 240.8 mg gallic acid equivalents (GAE), total flavonoids as 90.4 mg catechin equivalents (CE) as well as antioxidant capacity at 523.4 mg vitamin C equivalents (VCE) on ABTS assay and 329.5 mg VCE on DPPH assay among fractions. One g of water fraction contained total phenolics at 133.1 mg GAE, total flavonoids at 34.5 mg CE, and antioxidant capacity at 333.4 mg VCE for ABTS assay and 313.2 mg VCE for DPPH assay. Inhibition of tyrosinase activity of water fraction at 300 ${\mu}g{\cdot}mL^{-1}$ was at 47.2% and 21.1% for L-tyrosine and L-DOPA as its substrate, respectively. On the other hand, ethyl acetate fraction at 300 ${\mu}g{\cdot}mL^{-1}$ showed tyrosinase inhibition of 10.2% for L-tyrosine and 11.9% for L-DOPA. These results suggested that the phenolics from dry leaves of L. cuneata G. Don may be utilized as a potent source of antioxidants and skin whitening agents.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.2
• /
• pp.200-208
• /
• 2010

The objectives of this study were to evaluate no-tillage cover crop cropping systems for organic farming in paddy. The experiment was performed at Ihyeon series (silt loam: 9.1% sand, 73.0% silt and 17.9% clay) which affected by different management practices. Planthopper population per 20 plant was significantly higher 65.3 for conventional tillage with chemical compounds (control) compared with 3.4~9.6 for no-tillage treatments (without rice straw or green manure, amended with rice straw, hairy vetch, rape, rye, and Chinese milk vetch). Also, disease severity of sheath blight was significantly higher 10.5% for control compared to 0.7~2.9% for no-tillage treatments. Four weed species, namely Monochoria vaginalis, Ludwigia prostrata, Rotala indica, and Aneilema keisak occurred in no-tillage paddy, whereas Monochoria vaginalis occurred in control only. The pH, available phosphate, and microbial biomass C in paddy were steeply decreased in response to submerging, but increased at first heading stage. Soil $NH_4$-N content at first heading stage was significantly higher in no-tillage treatments compared with control. The grain yield was significantly higher in 4.30 Mg $ha^{-1}$ for control than other treatments. Meanwhile, rice productivity was significantly higher in 2.69 Mg $ha^{-1}$ for no-tillage amended with Chinese milk vetch compared to other no-tillage treatments. The number of panicle per plant, grain number perpanicle, and percent ripened grain were highly related for increasing the yield of rice. These results show that Chinese milk vetch was optimum cover crop for organic farming in no-tillage paddy.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.11
• /
• pp.1116-1122
• /
• 2008

The existing technology which is for recycling aggregate using dried swage sludge have been limited for practical application, because the properties of aggregate are not regular and don't meet the recycling aggregate standard. In this research, an innovative slag-producing technology is developed by addition of oyster shell, waste cast-sand and iron-rust as inorganic waste additives. The mixed slag with the additives was evaluated at the various ratio of CaO/SiO$_2$, SiO$_2$/Al$_2$O$_3$ and Fe$_2$O$_3$/SiO$_2$. When the waste sludge was melted at 1,400$^{\circ}C$ during 20 minutes, the optimal ratio of CaO/SiO$_2$ for the slag added the oyster shell, SiO$_2$/Al$_2$O$_3$ for added the waste cast-sand and Fe$_2$O$_3$/SiO$_2$ for added the iron-rust were 1.00, 3.00 and 0.60, respectively. At the optimal condition, the bulk density of the slag was 2.24 g/cm$^3$, 2.45 g/cm$^3$ and 2.73 g/cm$^3$, And the 24 h water adsorption was 4.72%, 1.44% and 0.37%, respectively. Therefore it is proved that adding the waste additives to the process of the slag production contributed for elevation of recycling aggregate properties. And also it is expected that production cost can be reduced by decreased melting temperature.

• Journal of Animal Science and Technology
• /
• v.44 no.3
• /
• pp.297-304
• /
• 2002

This study was conducted to investigate the influence of dietary Panax Ginseng Refuse(PGR), Dioscorea Japonica Refuse(DJR) and Oriental Medicine Refuse(OMR) on performance(feed intake, body weight gain, feed conversion, mortality) of Korean Native Chicken(KNC). KNC were randomly assigned to one of the 4 dietary treatment : 1) control(commercial feed), 2) PGR(commercial feed supplemented with 5% panax ginseng leaves) 3) DJR(commercial feed with 5% dioscorea japonica hulls and 4) OMR (commercial feed with 5% oriental medicine refuse). 160 KNC were fed one of the above experimental diet for 12 weeks and slaughtered at 20 weeks of age. Daily DM intake of control, PGR, DJR and OMR diet were 125.79g, 122.26g, 122.30g and 123.72g, respectively, with no significantly difference(p$>$0.05). The DM utilizability of control and DJR(62.89% and 61.20%) diets were higher(p$<$0.05) than those of PGR and OMR(55.44% and 59.76%)(p$<$0.05). 16 weeks weight of bird fed control, PGR, DJR and OMR diets were 1,436.6g, 1,427.2g, 1,546g and 1,422.0g respectively with DJR being the highest than other treatments(p$<$0.05). Total feed intake of control, PGR, DJR and OMR diets were 6,087g, 5,947g, 5,816g and 5,852g, respectively where control was higher than other treatments. The feed conversion of PGR, DJR and OMR were higher than the control. Chicken housed mortality of control, PGR, DJR and OMR were respectively 24, 15, 13 and 20 birds with rather lower mortality in the supplented groups(p$<$0.05). The body weight, carcass weight and carcass yield were not different among the treatments. But abdominal fat of chicken in control and OMR groups were higher than that of DJR and PGR groups.

• KSBB Journal
• /
• v.22 no.5
• /
• pp.356-361
• /
• 2007

Cyanobacteria are a very old group of prokaryotic organisms that produce very diverse secondary metabolites, especially non-ribosomal peptide and polyketide structures. Although some cyanobacteria produce lethal toxins such as microcystins and anatoxins, some may be useful either for development into commercial drugs or as biochemical tools. Detection of unknown secondary metabolites was carried in the present study by a screening of 98 cyanobacterial strains from Cyanobiotech GmbH in order to establish a screening process, isolate pure substances and determine their bioactivities. A degenerated polymerase chain reaction technique as molecular approaches has been used for general screening of NRPS gene and PKS gene in cyanobacteria. A putative PKS gene was detected by DKF/DKR primer in 38 strains (38.8%) and PCR amplicons resulted from a presence of NRPS gene were showed by MTF2/MTR2 primer in 30 strains (30.6%), respectively. A screening of interesting strains was performed by comparing PCR screening results with HPLC analyses of extracts. HPLC analysis for a detection of natural products was performed in extracts from biomass. 5 strains were screened for further scale-up processing. 7 pure substances were isolated from the scale-up cultures and tested for bioactivities under consideration to purity, amount and molecular weight of substances. One substance isolated from CBT 635 showed cytotoxic activity. This substance may be regarded as Microcystin LR.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.3
• /
• pp.211-218
• /
• 2018

Instant face lifting cosmetics contain various film forming agents for stretching the wrinkles on the skin surface. But, most of the film-forming polymers have sticky feels. And they are easily scrubbed out when skin is rubbed on. In this study, we focused on the influence of sodium silicate that has rapid film forming effect on skin surface and immediate wrinkle reducing effect. Sodium silicate, also known as water glass or soluble glass, is a compound containing sodium oxide and silica. Sodium silicate is a white powder that is readily soluble in water, producing an alkaline solution. Sodium silicate is stable in neutral and alkaline solutions. The sodium silicate solution hardens by drying in air and rapidly forms a thin film. When the solution is applied to the skin, the fine membrane coating is formed by water evaporation and ionic bond re-formation. It also makes the strong siloxane (Si-O) bonding on the skin surface. When these fixation properties are applied to cosmetics, they can give remarkable skin tightening effect. The sodium silicate solution can provide the lifting effect by forming a film on skin at a proper concentration. But, skin irritation may be caused with too high concentration of sodium silicate. We studied a desirable range of the sodium silicate concentration and combination with other fixatives for skin care formulation that has no sticky feels and no scrubbing out phenomenon. Immediate lifting gel was developed by using sodium silicate and various thickening systems. Among of the various thickeners, aluminum magnesium silicate showed the best compatibility with sodium silicate for rapid lifting effect. This instant physical lifting gel was confirmed as a low stimulating formula by skin clinical test.

• Journal of Sericultural and Entomological Science
• /
• v.21 no.2
• /
• pp.11-19
• /
• 1979

This has been carried out how the sericin insoluble fixations of raw silk should be with potassium alum. This is learned from the leather tanning technique which the process works with collagen, a kind of proteins. Former reports had shown such works, however, they did not consider the moisture absorbability after their process reports by using chromium alum, formalin or vinyl acetate grafting. This report, however, paid attention to protect such absorbability as well as sericin fixation, so far it may be useful for plactical use of silk. In order to clear how the sericin is fixed with such chemicals, fundermental mechanism of weding process and chemical reaction against proteins were also discussed. The obtained results of the report are as followings. 1. Alum should not be treated for raw silk with high temperature bath like other reports because such treat induces raw silk to be stiffly after the treat. 2. It is recommended that raw silk should be treated with alum solution at room temperature for more than three hours. Even in this case, the use of only alum with raw silk could to fix sericin some how, but it increased the water proofness of the silk. 3. 1% of alum solution was found to be able to fix the sericin of raw silk. 4. In case we consider only sericin fixations, a combination treat of 1% alum for three hours and 0.5% NaOH for ten minutes method showed the best result. 5. In case we consider sericin insoluble fixation and moisture absorbility, the reversive combination of the above process was found to be the best results. 6. Sericin fixing evidence was shown with drying feature curves of wed each treated silk where we could to analyze how the chemical nature is changed after each treat. 7. Deguming ratio may be obtained up to 4.3% after the alum combination treat with regular raw silk. Such ratio was considered to be good enough for the purpose when the textile is washed with warm soap water. 8. Moisture absorbability of the combination treat of alum and NaOH was found to be good enough as well as non treated silk. 9. The tenacity and elongation of the treated silk did not change even after three month. 10. Above all, this method is considered to be better process than other coloured fixing (tannin method. Cr-alum method) or smell fixing (formalin method. vinyl acetate method).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.23-28
• /
• 2015

This study was performed to investigate the adequate standard pot and number of plants per tree of raising seeding pot on the foxtail millet transplanting culture in the southern province. Due to the various application of wellbeing-health food recently, for upbringing of the foxtail millet, millet and sorghum in minor cereals, R & D and policy support is being promoted actively. The foxtail millet growing season is so short from 90 to 130 days, and it is large variations for a growth temperature. The main results are as follows. When it comes to foxtail millet transplantation, seedling quality of 406 holes, 200 holes and 162 holes of raising seeding pot type were not all significant, and field rooting percentage is accounted for all 94 to 95%. Yield of a foxtail millet was exposed in 406holes 305 kg/10a>162holes 303 kg> 200holes 302 kg order, and it was no significance between test processing. When it's the raising seeding transplanting culture, in case of pot culture, 406holes pot culture were reduced the bed soil cost 63%, pot 50%, working hours 18% for 200holes pot. Transplanting seedling quality per a foxtail millet transplanting culture method, dry weight was high inclination as transplanting number of plant is less, and field rooting percentage displayed more than all 95%. Yield appeared to 2 plants seedling transplanting 315kg/10a> 3 plants seedling transplanting 304kg>1 plant seedling transplanting 256kg order. The projected cost per the pot-sort on the raising seeding transplanting culture of foxtail millet, the seedling transplanting culture of 406holes was reduced 40% percentages compared to 200holes as 76,230won/10a. As a result, 406holes pot and 2plants seedling transplanting culture, labor-saving culture was possible.

• Journal of Sericultural and Entomological Science
• /
• no.12
• /
• pp.37-45
• /
• 1970

The processing management forms of our country's filature factories in 1969 are summarized as follows. (1) About 80％ of total cocoon collection is made within 5 days involving peak day, and 10％ of cocoon collection is finished until 3 days before and after the peak day, (2) About 92％ of alive cocoons transported on unpaved road, and about 40％ of the cocoons purchased by all factories are loaded on trucks from common selling station which is far beyond 40km, therefore a new packing system of alive cocoons to drop the damage of cocoon qualities, should be taken. (3) 22％ of all factories in our. country have only low-temperature cocoon drying machine. Therefore the installment of hot-air cocoon drying machine is required urgently. (4) In view of cocoon qualities in our country, the grouping method of cocoon for reeling. taken by about 50％ of the factories at percent, which classify cocoons for reeling as high group (1,2,3,4 grades) and low group(5,6 grades), will have to be replaced by the method tat classify them high group (1,2 grades) middle group (3,4 grades), low group (5,6 grades). (5) The .ratio of cocoon assorting stood about 10％ in multi-ends reeling, about 15％ in automatic reeling, conclusively, the ratio of cocoon assorting for automatic reeling was higher tan that for multi-ends reeling. One person's ability for a day in cocoon assorting reaches to about 80-100kg. (6) Cocoon cooking condition requires the increase of the cooking time, the pressure and temperature used to be prolonged as much as the qualities of cocoons are material cocoon ior automatic and double cocoon machines are treated uncompletely. (7) Automatic silk reeling is being performed at 1-2$^{\circ}C$ lower in reeling water temperature and operated at about twice velocity. (8) The temperature and humidity of rereeling room stood at 25$^{\circ}C$, 67.2％ R.H and 32.3$^{\circ}C$, 51.9％ R.H of rereeling machine are showed, Average rereeling velocity is 233m/min and large reefs charged for one person are 7.5 reels and form of skein used in all factories is double skein. (9) About 73％ of water sources for filature used under-earth water. About 48％ of all filature factories in our country have not yet water purifying equipments. Installation of the equipment for these factories seems to be urgent, (10) Denier .balance, sizing reel, seriplane, are being used in most factories as self-inspection apparatus. (11) More than 90％ of the factories use the vacum tank in rereeling process and about 20％ of them use it in cocoon cooing process (12) Only 21％ of the factories use chemicals in filature process. About all them use "Seracol 100" in cocoon cooking process and "Seracol 500" in rereeling process, (13) Above survey results explain each all factories show large difference in the processing management. Therefore, it is believed that intercommunication through seminar or technical exchange will contribute to the production evaluation of cocoon in our filature industry.