• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.222.1-222
• /
• 2003

쌀가루 제조 후 입자크기 비율에 따른 품질 특성을 검토하였다. 혼합 쌀가루의 색도를 보면 100-200메쉬 사이의 쌀가루 색도에 있어 자기는 유의성을 보이지 않았고 혼합쌀가루가 습식의 함량이 많을수록 쌀가루의 밝기가 증가됨을 나타내었다. 건식과 습식의 비율에 있어 밝기는 유의성을 나타내었지만 a값과 b값의 경우 혼합비율에 유의성을 나타내지 않았다. 혼합쌀가루 역시 입자크기가 작을수록, 건식쌀가루의 혼합 비율이 높을 수록 수분흡수지수(WAI) 및 수분용해지수(WSI)의 값은 높은 경향을 나타내었다. 80메쉬의 혼합쌀가루는 건식쌀가루의 혼합 비율에 상관없이 거의 같은 WAI의 값을 나타내었고, 100-140메쉬의 혼합쌀가루의 WAI 값이 가장 높은 값을 나타내었다. WAI와 WSI의 값은 각각 쌀가루의 수분함량과는 유의적인 연관성은 없는 것으로 나타났으며 각 쌀가루의 입자의 크기와 건식, 습식쌀가루의 종류와 혼합 비율에 따라 변화가 있는 것으로 나타났다. 입자의 크기에 따른 호화엔탈피의 변화는 200메쉬 이하의 입자 크기에서는 큰 영향을 주지 못했으나 200메쉬 이상에서는 호화엔탈피 값에 차이가 있었다. 혼합쌀가루의 경우 입자가 클수록 전분손상도가 낮게 나왔으며 건식쌀가루의 함량이 높을수록 전분손상도가 높게 나타났다.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.221.1-221
• /
• 2003

습식쌀가루는 침지 후 롤밀(Roll mill)로 분쇄 후 건조하여 휘츠밀(Fitz Mill)로 분쇄하여 제조하였으며 건식쌀가루는 Roll mill, Fitz Mill, 볼밀(Ball mill)의 입자 크기별로 만들어 쌀가루의 특성을 검토하였다. 건식쌀가루의 경우 제분공정의 횟수가 증가할수록 자기가 증가됨을 나타내었고 a값과 b값의 감소를 나타내었다. 습식은 건식에 비해 유의적으로 높은 자기를 나타내었고 건식과 마찬가지로 제분공정이 길어질수록 같은 색도 양상을 나타내었다. 각 입자크기에 따른 색도는 습식이 더높은 밝기 값을 나타내었다. 제조공정별 단계에 따른 수분흡수지수(WAI) 및 수분용해지수(WSI)의 값은 건식, 습식 모두 roll mill < Fitz mill < Ball mill 순으로 높은 값을 나타냈고, 물에 침지되어 침출액이 제거된 습식쌀가루의 WAI, WSI는 건식쌀가루보다 낮은 값을 나타내었다. 입자크기에 따른 건식쌀가루의 WAI, WSI의값은 입자가 작을수록 높은 값을 나타낸 반면 습식쌀가루의 WAS의 값은 80-100Mesh의 입자에서 가장 높은 값을 나타냈었고, 100-140Mesh이후로는 WAS의 값이 감소 한 반면 WSI의 값은 입자가 작을수록 높은 값을 나타내었다. 호화양상은 습식쌀가루가 호화엔탈피 (ΔH)의 값이 높게 나타났으며 제분방법의 횟수가 증가할수록 전분손상도가 증가됨을 나타내었다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.7
• /
• pp.900-907
• /
• 2008

The physicochemical properties of black rice flours produced from dry and wet milling were carried out to investigate their applications in food processing industry. The dry milled black rice flours showed lower fat, protein, ash, and anthocyanin contents than those of wet milled black rice flours with no effect due to number of millings. Average particle sizes ($379{\sim}288\;{\mu}m$) of dry milled flours were bigger than those ($336{\sim}253\;{\mu}m$) of wet milled flours. Particles with 60 mesh or more increased with increasing milling times. Wet milled flours had higher damaged starch, water solubility index (WSI), and water absorption index (WAI) compared to dry milled flours. Pasting properties measured by rapid visco analyzer (RVA) resulted in higher pasting temperatures in dry milled flours ($62.5{\sim}69.4^{\circ}C$) than wet milled flours ($46.1{\sim}46.4^{\circ}C$). As the number of milling times increased, pasting temperature of wet milled flours were not effected. Dry and wet milling resulted in reduced trough, final viscosity, and consistency with increasing milling times.

• Korean Journal of Food Science and Technology
• /
• v.27 no.5
• /
• pp.690-696
• /
• 1995

Properties of dry milled rice flours made of paddy with different moisture content (12.6, 18.4 and 24.4%) were compared with those of wet milled rice flour. Among dry milled rice flour, the higher moisture content of paddy the finer particle size and the more distinct shape of starch were observed. As the moisture content of paddy increased, L (lightness) value and water absorption index of rice flour were increased, while setback in amylogram and water soluble index were decreased. Lower gel consistency and gel strength were found in dry milled rice flours than in wet milled rice flour, while no significant difference was found among dry milled rice flours. Enthalpy for melting crystalline of retrograded gels was higher in dry milled rice flours made of paddy with 24.4% moisture content than in other dry milled rice flours. Wet milled rice flour had lower retrogradation enthalphy than dry milled rice flours.

• Food Science and Preservation
• /
• v.22 no.2
• /
• pp.174-181
• /
• 2015

This study investigated the physicochemical properties of three different types of rice flour prepared via dry and wet milling. The powder, soft, and hard-types of rice flour were Suwon No. 542, Suwon No. 541, and Unbong No. 30, respectively. The analysis of the proximate compositions of the different types of rice flour showed that their moisture content was 7.03~7.99%, their crude protein was 7.94~8.35%, their crude lipid was 0.71~1.49% and their crude ash was 0.25~0.82%. For the Hunter's color values, the L value was highest in the wet-milled rice flour, the a value was highest in the dry-milled rice flour, and the b value was highest in the dry-milled rice flour. All the samples showed distinctive rice starch particles in the particle analysis using scanning electron microscope. The dry-milled rice flour showed the greatest amount of irregular particles and the coarsest texture. The water absorption and water solubility indices were higher in the wet-milled soft- and hard-type rice flour. The crystallinities of the samples by X-ray diffractography were all A-type, but the crystallinity of the dry-milled hard-type rice flour was higher in diffraction degree. For the amylogram properties, the wet-milled soft-type rice flour showed the highest maximum viscosity, breakdown and setback. In the meanwhile, the dry-milled soft-type rice flour showed the highest initial pasting temperature, onset, peak, and end temperatures despite of the reverse enthalpy.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.7
• /
• pp.915-920
• /
• 2007

Rice flour milled from spray-washed rice was stored at $5^{\circ}C$, $20^{\circ}C$, and $35^{\circ}C$ for 4 months and changes in flour properties during the storage were investigated. Moisture content of rice flour tended to decrease during the storage, and the reduction in the moisture content was higher at higher storage temperature. Compared to dry-milled rice flour, lightness of the rice flour milled from spray-washed rice was slightly higher and tended to increase slightly during the storage. Rapid Visco-Aanlyzer (RVA) peak viscosity of rice flour milled from spray-washed rice was higher throughout the storage period, compared to dry-milled rice flour. The RVA peak viscosity was lower in the order of rice flour stored at $5^{\circ}C$, $20^{\circ}C$, and $35^{\circ}C$. Little changes in setback viscosity were observed in rice flour stored at $5^{\circ}C$ and $20^{\circ}C$, while an increase in the setback viscosity was found in rice flour stored at $35^{\circ}C$. Total bacteria count was consistently lower in the rice flour milled from spray-washed rice, suggesting that spray-washing prior to milling could lower microbial growth of rice flour during storage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.11
• /
• pp.1596-1602
• /
• 2012

Eight rice cultivars grown in Korea were analyzed to investigate the quality of flour prepared using wet and dry grinding methods. The hardness of the kernel was related with starch damage following dry grinding but not following wet grinding. Although Chenmaai had the hardest steeped kernel, its flour exhibited minimal starch damage, a lower water absorption index (WAI), and a smaller difference between the RVA properties of wet and dry ground flour. However, Seolgan and Suweon517 are soft grains, and their flours had more starch damage and a higher WAI. In general, soft kernels produce better grinding characteristics. However, our wet grinding results indicated that grain hardness was not the main factor affecting the grinding characteristics. Even Chenmaai, with its hard kernels, had good grinding characteristics, whereas the softer kernels of Seolgan and Suweon517 did not show the appropriate grinding characteristics.

• The Korean Journal of Food And Nutrition
• /
• v.28 no.6
• /
• pp.1065-1070
• /
• 2015

A high-yield Korean rice cultivar cv. Boramchan and Hanmaeum, and rice cultivar for use in staple cv. Hopum were prepared and investigated for their physiological characteristics. Water content, water holding capacity, amylose content, damaged starch content, particle size, and pasting properties of the rice flours were measured. Moisture content of the Boramchan and Hanmaeum, made under wet and dry milling conditions, were as follows: wet conditions (14.79% and 13.56% respectively) and dry conditions (7.98% and 7.14% respectively). Water holding capacity of the Boramchan and Hanmaeum made by wet milling condition was 236.67% and 231.35%, respectively. Water holding capacity of the samples made by dry milling condition showed a higher score compared with other samples. The amylose content of Hopum, Boramchan, and Hanmaeum made by dry milling condition were 19.12%, 19.55% and 19.59%, respectively. Damaged starch contents of the samples made by wet milling showed a lower score. Final viscosity of Hopum, Boramchan, and Hanmaeum made by wet milling condition was 2,604, 3,052, and 2,917 cp, respectively. In this study, the results indicated that the super-yield Korean rice flour made by wet milling condition tends to show a lower water holding capacity, damaged starch contents and particle size, as compared to controls. However, a setback of the super-yield Korean rice flour was a higher score as compared to the controls, regardless of the milling conditions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.7
• /
• pp.886-890
• /
• 2006

Rice flours produced by dry, wet, and semi-wet milling methods were used to investigate bread-making properties. Wet milled rice flours were produced by two different steeping temperatures of $25^{\circ}C$ and $55^{\circ}C$, properties of composite flour containing 70% rice flour and 30% wheat flour with the addition of vital wheat gluten were tested. Among rice flours, wet milled rice flour showed increased mixing time and dough stability determined by a mixograph. Wet milled rice flours produced higher loaf volume compared with dry of semi-wet milled rice flours. Wet-milled rice flour steeped at $55^{\circ}C$ appeared to produce good rice breads with relatively high loaf volume. Crumb hardness of bread prepared with wet milled rice flour was lower than the other breads and increased slowly during 3-day storage at $25^{\circ}C$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.184-192
• /
• 2017

Rice flours from five rice (Oryza sativa L.) varieties with different amylose content were prepared by both wet and dry milling processes. The moisture content of wet-milled rice flours (WMR) was approximately three-times higher than that of dry-milled rice flours (DMR). Water absorption index (WAI), water solubility index (WSI), and swelling power (SP) increased in proportion to temperature. The WAI, WSI and SP values of DMR were higher than those of WMR. Baeokchal (BOC), which is a waxy rice cultivar, had a significantly high WSI value. Pasting properties of DMR, except for the BOC cultivar, resulted in an increase in peak, trough, final, and setback viscosities. The levels of resistant starch in four cultivars, except for Dodamssal (DDS), were under 1%, irrespective of the milling process, whereas the resistant starch contents of DMR and WMR in DDS were 9.18% and 6.27%, respectively. In vitro digestibility of WMR was higher than that of DMR, and the estimated glycemic index of the rice flour varieties ranged from 57.6 to 81.3. Damaged starch content of WMR was less than that of DMR; in addition, a negative correlation was observed between the amylose and damaged starch contents of WMR. These results suggest that the properties of rice flour vary depending on the milling method and flour variety, and could be a reference for selecting the appropriate processing method.