• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.10-13
• /
• 2001

이 연구에서는 2010년도 154kV, 34skV 및 765kV 송전 계통을 대상으로 전력 조류 계산 및 과도 안정도 해석 프로그램을 개발하여 새로 건설되는 대용량 원전 전력계통의 안전성을 평가하였다. 개발된 프로그램은 실계통 전체 송전망 및 전국 발전기 모선을 대상으로 전력 조류계산, 3상 단락 고장계산, 과도안정도 계산을 위하여 통합된 형태의 MS-Windows 기반 프로그램 패키지로 개발되었다. 프로그램의 효용성 검증을 위한 사례연구로 2010년의 송전계통에 대한 전력 조류를 계산하여 과도안정도를 해석한 결과 대용량 원전 전력계통은 극단적인 경우를 제외하고는 과도적으로 안정함을 확인하였다.

• Journal of Drive and Control
• /
• v.2 no.1
• /
• pp.10-17
• /
• 2005

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.16 no.5
• /
• pp.453-462
• /
• 1987

• The Journal of Society for e-Business Studies
• /
• v.9 no.2
• /
• pp.87-108
• /
• 2004

The current construction industry mainly uses paper-based construction documents which are produced during the whole life cycle. The paper-based information hinders to reuse the construction information, due to the inefficiency to exchange and share the construction information between designers and constructors. To overcome these problems, construction CALS/EC (Continuous Acquisition and Life Cycle Support/Electronic Commerce) has been proposed by the government. It supports efficient reusing, sharing and exchanging the construction information using digitalized drawings and documentations. This study intends to show the future applying methodologies of using the standardized key technologies in the construction CALS/EC based on the case study of Korea and several countries.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.3
• /
• pp.31-41
• /
• 2011

The $LCCO_2$ evaluation programs previously developed in Korea involve limitations in establishing strategies of reducing environmental loads to optimal level in a way to put in materials directly after designing. Therefore, this study has the purpose to extract and propose elements required for the establishment of highly accurate system by counteracting swiftly in a method with high energy efficiency over cost at planning stage. To that end, existing $LCCO_2$ evaluation programs in Korea and abroad were compared and analyzed, and in the planning stage, GEM-21P and Carbon-navigator intended for the establishment of building energy performance improving strategy were selected as the evaluation program for survey. On such basis, after comparison and analysis between $LCCO_2$ calculating methods and system structures of the two programs, elements required for system establishment that can evaluate life-cycle environmental loads of building in planning stage were proposed.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.6
• /
• pp.227-234
• /
• 2007

현재 플랜트 산업이 해외 건설 부문에서 차지하는 비중은 해외 건설 수주액의 60% 이상에 달하고 있다. 하지만 시공부문의 높은 기술경쟁력에 비하여 고부가가치 창출이 가능한 설계부문은 그 기술이 미흡한 실정이다. 따라서 본 연구에서는 플랜트산업의 우수설계능력 확보를 위하여 플랜트 설계단계의 성공에 대한 정의를 내리고, 플랜트 설계업무를 분석한 뒤, 설문조사를 통하여 플랜트 설계단계 프로세스의 업무별 중요도를 파악하였다. 또한 이렇게 파악된 중요도 점수를 공정관리 프로그램에 적용하였고, 이를 바탕으로 제시된 결과에 대한 전문가의 검토를 통하여 최종적으로 플랜트 설계단계의 핵심성공요인(CSF)을 도출하였다. 본 연구의 결과는 플랜트 설계단계 성공의 요인을 파악하고 확인 및 관리를 위한 요소들을 제시하여 설계단계 업무수행의 가이드라인으로 활용될 수 있을 것으로 기대된다. 또한, 향후에는 도출된 핵심성공요인을 이용하여 플랜트의 성공과 실패를 가름할 수 있는 정량적 평가모델 개발 등의 연구가 수행될 수 있을 것이다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2015.07a
• /
• pp.198-200
• /
• 2015

건설산업의 전자도면 작성을 위한 CAD분야는 해외 특정 소프트웨어가 시장을 90%이상 점유하여 기술종속으로 인한 CAD 기술의 자립화 문제가 심각하다. 건설산업에서 발생하는 전자도면의 작성을 위한 프로그램 사용은 자유경쟁을 통한 시장의 흐름에 따른 것이나, 공공기관에서 발주하는 건설사업의 전자도면 관리와 재활용을 위해서는 특정 회사의 과다 독점으로 인한 기술종속에 대한 대책이 필요하다. 따라서, 다양한 CAD 시스템에서 작성한 전자도면을 국내표준에 부합하는 도면으로 변환 가능한 모델러의 개발 방안을 제안한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5A
• /
• pp.709-718
• /
• 2008

Developed is a chloride penetration analysis program in which changes of environmental conditions such as temperature, humidity and external chloride concentration, and the diffusion, convection and binding of chlorides are considered. In order to consider the changes of environmental conditions, analyses for temperature and moisture distribution are implemented simultaneously, and variation of diffusion coefficients due to temperature, humidity and age is also considered. By comparing the calculated total chloride contents with some experimental data, it has been confirmed that the proposed analysis program can trace measured chloride distribution well. Also, through some example analyses, the mechanism of accumulation of chlorides at near surface and acceleration of corrosion of steel reinforcement in case that the moisture distribution changes according to repeated drying and wetting cycles have been verified.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2A
• /
• pp.339-349
• /
• 2006

The purpose of this study is to investigate the seismic behavior of circular reinforced concrete bridge piers with confinement steel and to provide the data for developing improved seismic design criteria. Fourteen circular reinforced concrete bridge piers were tested under a constant axial load and a cyclically reversed horizontal load. The accuracy and objectivity of the assessment process may be enhanced by the use of sophisticated nonlinear finite element analysis program. A computer program, named RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology), for the analysis of reinforced concrete structures was used. In the companion paper, the proposed numerical method for the seismic performance assessment of circular reinforced concrete bridge piers with confinement steel is verified by comparison with experimental results.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.6
• /
• pp.105-111
• /
• 2009

Construction equipment is a very important factor for successful construction. Also, the cost for construction equipment is a major part of the cost of construction. Therefore, the estimation of the equipment cost is a critical task in construction planning. A formula for production rates shown in 'Standard Unit Labor' has been used to estimate construction equipment capability and cost. Although the performance of the equipment has improved over time, the variables in the formula have not been updated in a timely manner. Therefore, this paper has analyzed the preceding research, and performed several site visits to measure the cycle time of a backhoe and a loader. Construction equipment production rates were calculated with collected cycle times and variables given in 'Standard Unit Labor'. In addition,production rates were estimated considering the circumstances of various sites with the simulation program 'crystal ball.'