• Journal of the Korea Safety Management & Science
• /
• v.7 no.5
• /
• pp.1-8
• /
• 2005

The consequences of rapid industrial advancement, diversified types of business and unexpected industrial accidents have caused a lot of damage to many unspecified persons both in a human way and a material way Although various previous studies have been analyzed to prevent industrial accidents, these studies only provide managerial and educational policies using frequency analysis and comparative analysis based on data from past industrial accidents. The main objective of this study is to find an optimal algorithm for data analysis of industrial accidents and this paper provides a comparative analysis of 4 kinds of algorithms including CHAID, CART, C4.5, and QUEST. Decision tree algorithm is utilized to predict results using objective and quantified data as a typical technique of data mining. Enterprise Miner of SAS and AnswerTree of SPSS will be used to evaluate the validity of the results of the four algorithms. The sample for this work chosen from 19,574 data related to construction industries during three years ($2002\sim2004$) in Korea.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.199-200
• /
• 2019

Although accidents in the domestic construction industry have been decreased gradually, deaths in the construction sites have been occupied 49.9 percent of the total industry and deaths from fall accident have been accounted for 59.7 percent of the construction industry. In order to prevent fall accident, Occupation Safety and Health Act(OSHA) was enacted for setting management standards and detailed regulations was designed by the Ministry of Employment and Labor. Although government has been pushed for companies and workers to comply the regulations, currently, many domestic construction sites have been violated. On the other hand, in safety-advanced countries such as the United States, Japan, and the EU, industrial accidents have been decreased due to continual application of adapted safety policies according to characteristic in each country. Therefore, it is necessary to analyze laws and polices of advanced countries and apply them to domestic construction sites in order to reduce fall accidents. Therefore, the objective of this study is to compare domestic laws related fall accident with advanced countries laws. In the future, the results of this study will be utilized as a reference to reinforce Occupation Safety and Health Act(OSHA).

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.460-468
• /
• 2021

A TBM is an equipment that excavates a tunnel with a full face by rotating a circular cutter head and its advantages are fast excavation rate and safe construction. A TBM, which is primarily used for tunnel excavation on civil construction sites, is easily adaptable to information and communication technology. Research related to unmanned and automated technology is being actively pursued. TBM applications for mining and energy resource development in other countries were investigated in this study. The difference of TBM applications between the mining and energy resource development and civil construction sites was examined. Technical factors such as geological conditions, depth, site access, TBM launching, alignment and inclination, TBM size, and others that should be considered when choosing a TBM were investigated. Finally, the advantages and disadvantages of TBM application in mines and the technical requirements for TBM for successful mine application are summarized.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.5
• /
• pp.775-784
• /
• 2023

Drone images are being used more and more actively in the fields of surveying and spatial information, and are rapidly replacing existing aerial and satellite images. The technology of quickly acquiring real-time data at low cost and processing it is now being applied to actual industries beyond research. However, there are also problems encountered as this progresses. When high-resolution spatial information is acquired using a general 2D flight plan for a terrain with sever undulations, problems arise due to the difference in resolution of the data. In particular, when a low-altitude high-resolution image is taken using a drone in a mountainous or steep terrain, there may be a problem in image matching due to a resolution difference caused by terrain undulations. This problem occurs because a drone acquires data while flying on a 2D plane at a fixed altitude, just like conventional aerial photography. In order to acquire high-quality 3D data using a drone, the scale difference for the shooting distance should be considered. In addition, in order to obtain facade images of large structures, it is necessary to take images in 3D space. In this study, in order to improve the disadvantages of the 2D flight method, a 3D flight plan was established for the study area, and it was confirmed that high-quality 3D spatial information could be obtained in this way.

• Journal of Korean Society of Disaster and Security
• /
• v.15 no.2
• /
• pp.27-36
• /
• 2022

The adequacy of industrial water supply is one of the core elements of the construction of industrial complexes. This study examined the supply of industrial water through various ways, according to the planning and creation of industrial complexes and the operating utilization rate of tenant companies oksan industrial complex. As for calculating the supply of industrial water and establishing water supply plan, the basic data analysis and the land use plan are utilised. The adequacy of calculating the basic unit by industry, which is the basis for calculating industrial water, was evaluated. In addition, analyzed industrial water usage data and the raw unit of each industry was compared with the actual data from the Oksan Industrial Complex, which selected as the research target area among the industrial complexes in Cheongju-si administrative districts, where actual data can be secured. The result of the study shows that the peak load rate of industrial water was found to have the peak load of more than twice as the result of analyzing the actual usage, and the basic unit of industrial water industry showed a significant difference from the actual usage. In particular, the decreasing rate of the basic units was significant comparing the increasing rate of basic units. In addition, the raw unit of the industry that uses more water decreased significantly, and the raw unit of the industry that uses less water increased slightly.

• The Korean Journal of Health Service Management
• /
• v.14 no.1
• /
• pp.111-122
• /
• 2020

Objectives: The study aims to compare indirect form of employment with direct form of employment on the variables of occupational danger and physical health. Methods: I studied based on the data of 5th Korean Working Conditions Survey (KWCS) which was performed by Occupational Safety & Health Research Institute of Korea Occupational Safety and Health Agency in 2017. SAS 9.4 was used for statistical analysis of the final data. Results: Based on the verification result, the hazard is higher for direct employment than for dispatch or subcontract in case of exposure to risks in the health and social welfare industry. Based on cross tabulation, significant differences were found in the proportions of harmful and safe tasks in direct employment and those in outsourcing in the physical health industry. It was found that the risk of hazard is 2.18 times higher in outsourcing jobs than in direct employment. Conclusions: It is necessary to consider a dispatch and subcontract partner as a strategic partner and not simply hand over dangerous or hard tasks to them. Active and aggressive cooperation along with support from the employer enterprise built in the contract is necessary for the safety and health of dispatch or subcontract laborers.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.806-814
• /
• 2023

Purpose: According to the Occupational Safety and Health Act of the Ministry of Employment and Labor, in order to prevent industrial accidents, the right to stop work must be exercised in the event of an imminent danger. This study conducted a fact-finding survey on whether employers fulfilled the right to suspend work in the workplace when an imminent danger, such as a typhoon, was encountered. Method: For two days from August 9 to October, when the impact of Typhoon Khanun No. 6 was significant, it was confirmed by wire whether or not the work suspension was carried out at the workplace, and the subjects of the survey were 1,649 construction sites, 830 manufacturing sites, and 278 other industries, for a total of 2,757 sites. Result: As a result of the fact-finding survey, 56% (1,555 locations) on August 9th and 77% (2,142 locations) on August 10th carried out full or partial work suspension. In particular, on August 10, when the typhoon landed, 40% of all workplaces completely stopped work. Conclusion: Through this study, it was confirmed that the right to suspend work by employers is being used in actual workplaces. In the future, when there is an imminent danger, in addition to the right to suspend work, flexible and telecommuting, working hour adjustments, etc. must be actively used to ensure the safety of workers and protect their lives.

• Journal of the KSME
• /
• v.23 no.2
• /
• pp.72-75
• /
• 1983

(1)국산화의 득실 이러한 과감한 정제기기의 국산화는 정유업계에서 볼 때 저렴한 가격과 보다 빠른 납기로 인한 건설공기단축은 초기투자비를 경감시키고 고가의 예비품확보의 불필요로 인한 운전경비를 경감케 하는 이점은 있으나, 기술 및 제작경험의 부족과 재질불량등으로 인한 국산기기의 잦은 고장과 짧은 기기수명은 오히려 기업이윤에 역효과를 초래하며 안전면에도 문제점이 있다. 국가적 견 지에서 정제기기의 국산화는 외화절감으로 인한 대외경쟁력 강화와 경기부양, 중화학 플렌트 기 술개발 등 선진공업국 대열로 향한 국가경제개발의 필수적 과제라 하겠다. (2) 정제기기 국산화에 대한 정부지원의 필요 우리나라 기계공업기술이 200년의 역사를 가진 선진공업국의 정제기기기술에 비하면 낙후된 것은 사실이므로 전문제조업체에서 꼭 필요한 분야는 기술을 도입할 수 있도록 정부가 정책적으로 유도하고 지원하여야 할 것이며 산업기계의 국산화에 문제가 되는 특수소재분야의 개발에도 정 부차원에서 계열전문업체를 육성하여야 할 것이다. 자금지원면에서 플랜트국산화 자금을 극대 화하고 외자차관보다 외화차관로 지향하여 국산기기제작을 권장해야 할 것이다. (3) 정유기기 국산화의 전망 제조업체는 성실히 기술개발에 전념하고 품질관리에 철저를 기하여 정성껏 제작한다면 외상에 못지않는 정제기기 생산이 가능할 것이며 국내정유 및 석유화학설비의 80%까지 국산화는 무난할 것으로 사료된다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.07a
• /
• pp.259-260
• /
• 2017

본 논문에서는 건설 현장이나 발전소 등의 고소 작업이 많은 곳에서 작업하는 근로자의 안전을 확보하기 위해, 클라우드 웹 서비스에 기반에 고소작업자의 행동 데이터를 수집 저장하여 그 데이터를 통해 관리자가 작업자의 행동을 모니터링 하고 위험경고 메시지를 받을 수 있는 시스템을 제안하였다. 작업자가 하는 행동을 관리자가 실시간으로 확인하는 것을 통해 고소 작업산업 현장에서 작업자의 경각심으로 예방이 가능하다.

• Explosives and Blasting
• /
• v.19 no.2
• /
• pp.19-26
• /
• 2001

국토의 효율적 활용을 위한 각종 토목.건설공사나 석재 및 골재생산 등을 위해 암반을 굴착함에 있어 다양한 산업용 화약류가 이용되고 있다. 그러나 화약의 사용으로 인해 수반되는 발파진동은 인체 및 구조물 등에 피해를 발생시켜 인근의 주민과 마찰을 일으키고 있다.본 연구에서는 발파진동속도 data를 취합하여 분석 사용함에 있어서 V, T, L 성분의 최대 실벡터합을 사용하는 경우와 최대 벡터합을 사용하는 경우를 비교하여 실제 현장 기험시 적용성을 높이고자 하였다. 진동속도는 최대 실 벡터합에 비해 최대 벡터합에 의해 구해진 진동속도의 크기가 장승근에서는 24.6%, 삼승근에서는 26.1%가 증가하는 것으로 나타났으며, 단일성분의 최대치, 최대 실벡터합, 최대 벡터합의 안전율은 1 : 1.154 : 1.359로 나타났다