• Explosives and Blasting
• /
• v.25 no.2
• /
• pp.47-60
• /
• 2007

The blast demolition technology has been used to demolish various industrial facilities and tall buildings since 1950s in the advanced countries such as USA and U.K. It is now considered as one of safe demolition methods in the above countries. In Korea, several companies have tried to introduce blast demolition technology in the early days of the 1990s. However, this technology is still at the beginning stage and not fully adopted due to situation of avoiding technology transfer by overseas technical tie-up companies, lack of objects to be demolished and low level recognition on blast demolition. This technology shall be considered as a cutting edge technology to be applicable to demolition of skyscrapers, various industrial structures and factory buildings in the near future. Blast demolition of a pier structure was carried out under the site condition where there were already the constructed 2 pier structures of up and down line which had safety problems in an expressway construction project. The pier structures need to be demolished and reconstructed for a short period of time in consideration of the construction work process to be followed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.597-602
• /
• 2021

Even in the era of the 4th industrial revolution, the prevention of industrial accidents is still an important issue in industrial sites. In solving the problem of industrial safety, a product can be difficult to market if there is a lack of standard or method for a reliable performance evaluation. The purpose of this study was to develop and evaluate a test method for a wearable airbag product for protecting the body from falls that was newly developed to respond to fall accidents in industrial sites. As a research method, reliable evaluation standards were developed and applied through four stages of the evaluation and development process (Step 1: Product review, Step 2: Data research, Step 3: Expert meeting, Step 4: Drawing evaluation standard). In addition, the impact force was evaluated according to the developed evaluation standard. The fall impact force obtained through the evaluation showed a reduction effect of approximately 96% compared to the existing impact force. Therefore, the fall impact force was reduced significantly when the airbag was applied. This will enable new convergence products to be launched on the market and produce an environment where industrial workers can work safely.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.6
• /
• pp.24-35
• /
• 2023

Recently, the Ministry of Land, Infrastructure and Transport presented the '6th Construction Technology Promotion Basic Plan' and 'Smart Construction Revitalization Plan (2022.7.20)'. Off-Site Construction (OSC), which involves construction and production of PC (Precast Concrete) and Modular, etc., has advantages in shortening the construction period, reducing costs, improving quality, reducing construction waste, and reducing safety accidents. However, the construction cost is high compared to the traditional RC construction method, which has hindered its utilization and spread. In this study, OSC utilization was improved. An economic analysis indicator and methodology that can support decision-making in the planning and design stages for multi-unit housing were proposed. The factors used in the economic analysis of OSC (based on the PC method) of apartment houses were reviewed. As for the indicators used in the cost and benefit section, 'Construction Period', 'Disaster Occurrence', 'Waste Generation', and 'Greenhouse gas Emission', which reflect the technical advantages of OSC, were derived. In addition, a scenario analysis was conducted based on actual apartment housing case data for the presented economic analysis indicators and benefit calculation standards. The level of benefit that offsets the difference between the existing RC construction method and the construction cost was reviewed. In future studies, it will be necessary to conduct additional case studies to apply the measurement criteria for detailed indicators and supplement the benefit indicators.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.387-394
• /
• 2020

In this research, a physical property test of CLSM, which can safely and effectively utilize a great number of industrial byproducts and waste types, was used to review the applicability of GBFS, FNS, and FGB, as well as their field applicabilities as cavity fillers, and the following conclusions have been reached. first, For CLSM utilizing GBFS, FNS, and FGB, it was revealed that a proper mixing of over 30% of GBFS and FNS or within 5% of FGB is effective in improving the fluidity for field application. second, It was revealed that GF15B5 can suppress bleeding at a similar level as the base, whereas GF30B5 can do so at about 0.17% compared to the base. It was also verified that GF15, GF30, and GF45 can suppress bleeding at about 0.2%, 0.26%, and 0.3%, respectively, compared to the base. third, Both GF15B5 and GF30B5 exceeded 0.4MPa in 7day strength tests to satisfy the field application and, also, the rates of increase of their initial strengths were found to be 323% and 233% higher than the base, respectively. Meanwhile, the 7day strength test of GF, which utilizes GBFS and FNS, also reached over 0.2MPa for field application, and it was revealed that GF15, GF30, and GF45 show 160%, 237%, and 185% higher strength increase rates, respectively, compared to the base.

• Journal of the Korean Society of Safety
• /
• v.22 no.4
• /
• pp.72-82
• /
• 2007

The purpose of this study is to put forward revitalization of the Honorary Industrial Safety Inspector System by using the survey(2006.05) of the Honorary Industrial Safety Inspector in the Construction Industry. It can be summarized to develop the system as the following: 1) If there are neither labor union nor representative of workers in a company, workers must elect the representative of workers at first and then recommendation of the honorary industrial safety inspector by the representative of workers, 2) It should regulated in the industrial safety and health act about the tenure of the representative of workers and the process of election, 3) Prohibition the honorary industrial safety inspector as the employer members in the Industrial Safety and Health Committee and exclusion of both main office supervisor and subcontract-company supervisor from the appointment of the honorary industrial safety inspector, 4) Measures to realize the prohibitive regulation of unfavorable treatment on the grounds that the inspector has performed legitimate activities as an Honorary Industrial Safety Inspector, 5) Statutory regulation of the educations' hours(primary education & professional education), 6) Specification of the professional education and increase of the frequency, 7) Support of the government(the Ministry of Labor) to revitalize the honorary industrial safety inspector system, 8) Put in a statutory form the regular hours to carry out the work of the honorary industrial safety inspector in the workplace.

• Explosives and Blasting
• /
• v.22 no.1
• /
• pp.45-56
• /
• 2004

The industrial explosives in Korea have been made and used since 1952. The blasting accidents have increased gradually with the use of explosives. Based on the Police Department and Guns & Explosives Safety Technology Association's researching materials, the blasting accidents between 1988 and 1997 have been investigated and analyzed in this paper. FTA method was applied for the analysis of the blasting accidents which occurred in the tunnels, roads, subways, and various kinds of building construction area. The results show that the majority of the accidents, about 45.7% of the total, are due to the fly rocks. It is similar trend in Japan. The FTA analysis performed on the accidents by fly rocks shows that the major source of the accident is human factors such as non-observance of the safety rules, less knowledge of the safety and so on. The results of the study ate expected to provide basic data for making and observing the safety rules, making and amending the laws concerned and planning the security project. It will be helpful in preventing the blasting accidents and in reducing the loss of valuable lives and the financial damage.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.56-56
• /
• 2010

최근 강구조물의 건설이 지속적으로 증가되어 왔다. 또한 강구조물의 유지관리 및 안전성에 대한 관심이 급증하고 있다. 시설물의 안전성 확보는 대형사고의 사전 예방, 공용 중 갑작스런 가동 중지에 의하여 발생되는 비용증가를 사전에 차단 할 수 있다는 점에서 그 중요성은 매우 크다고 할 수 있다. 또한 각종 구조물은 열악한 사용조건, 고온, 고압, 고속, 대형화됨에 따라 일단 사고가 발생 했을 경우 대형사고의 위험이 예상되므로, 제작시 검사의 강화뿐만이 아니라 공용 중 구조물의 안전성을 진단 할 수 있는 모니터링 체계의 확립이 필요한 시점이다. 현재 국내에서 강구조물들의 균열 모니터링 시스템에 관한 연구는 매우 미흡한 실정이며, 현재 사용되고 있는 비파괴검사 방법은 UT와 RT등이다. 이러한 방법들은 많은 시간과 경비가 소요되며 또한 거대구조물 혹은 사람의 접근이 어려운 곳에는 적용하기가 힘들다. 또한 주기적인 검사 작업으로 인한 막대한 시간과 비용의 손실이 발생되고 있으며 초기 결함을 조기에 인지하지 못함으로써 적절한 보수 보강 대책이 이루어지지 않아 보수 보강 비용의 증대를 초래한다. 더욱이, 결함이 진전된 이후에도 이것을 인지하지 못하여 적절한 대응을 하지 않는다면 대형사고로 이어질 수도 있다. 따라서 강구조물에 대한 효율적인 유지관리가 가능하고, 초기결함으로부터 균열이 진전하여 붕괴되는 사고를 미연에 방지하며 초기에 보수보강 작업을 수행함으로써 보수보강 비용도 절감 할 수 있는 모니터링 시스템의 개발이 요구되고 있다. 이러한 모니터링 시스템의 개발은 기술적 측면에서 강구조물의 효율적인 유지 관리 노하우를 얻을 수 있으며 경제 산업적 측면에서는 보수 보강 비용 및 불필요한 주기적 점검 비용을 절감 할 수 있다. 이 연구에서는 전위차법을 이용하여 강구조물의 필렛 용접부에서의 균열진전양상을 파악하고 정량화를 통해 필렛용접부의 잔여수명을 예측하였다.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.3
• /
• pp.25-31
• /
• 2016

Occupational Safety and Health Expenses Law in construction industry was enacted in 1988 by the notification of Ministry of Employment and Labor and 22 revisions have been made since. The fact that revisions have been made almost every year since the first enactment shows that Occupational Safety and Health Expenses can effectively prevent construction accidents and the need for revisions to fit the reality has been raised continuously. Despite the construction industry has undergone various internal and external environmental changes, (such as the changes in the safety and health management techniques and the increase in the construction employees' desire for safety) the appropriation standard of Occupational Safety and Health Expenses has been calculated based on the contract price. The construction industry has constantly suggested that the Occupational Safety and Health Expenses be calculated based on the estimated construction expenses since applying the current method doesn't provide enough money to secure the safety. Also because it has become mandatory to hire a health manager since 2015, the lack of Occupational Safety and Health Expenses is expected to get worse. In this study, we will analyze the usage of Occupational Safety and Health Expenses and propose a more practical and realistic change in setting the appropriation standard of Occupational Safety and Health Expenses.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.224-234
• /
• 2022

This study is conducted to propose an activation plan for fisherinas by analyzing in depth the needs for fisherina development. For this purpose, the result is derived through the analysis of literature, in-depth interviews and Delphi methods. As a result, the need for fisherina development is shown as follows: first, the saturation due to the increase of maritime recreational vessels; second, the possibility of economic development; third, the activation of the fishing village economy. Accordingly, the problems of the fisherina are derived, first, the conflicts with fishermen and recreational vessel users, second, the financial difficulties, third, the lack of infrastructure. The activation plans for fisherinas are as follows: first, forming a consultative body centered on stakeholders; second, ensuring financial soundness; third, building infrastructure by linking businesses; and fourth, systematic supplementary plans. These results will play an important role in expanding the underdeveloped domestic fisherina business and will be another step in activating the maritime leisure industry.

• Journal of the Korean Society of Safety
• /
• v.37 no.4
• /
• pp.36-43
• /
• 2022

Generally, in construction sites, the pipe support installation workers often use support pins of 9~10 mm which are much smaller than the safety standard sizes for work convenience. Although the safety certification standard thickness of the support pins is 11 mm, and the supervisors are often indifferent to this. Hence, products with far lower performance than the pipe support safety certification value of 40,000 N, which is applied in the supporting post-structural review, are used. Accordingly, this acts as a factor causing collapse accidents in the process of pouring concrete at the construction site. Therefore, this study performed compression experiments on new and reused pipe supports to determine how the thickness of the support pins affects the structural compression performance of the pipe support by considering the thickness of the support pins as a critical variable among various factors affecting the pipe support performance. In the course of the study, the compression test of the pipe support (V2, V4) for the new products showed that only 14 (58.3%) of the total 24 samples satisfied the safety certification standard value of 40,000 N, which indicates that more thorough quality control is required in the manufacturing process. Additionally, comparing the thickness of the support pins and their fracture shape shows that the pipes with support length of 4.0 m or longer are much more affected by the buckling of the entire length than the thickness of the support pins. Of the several factors affecting the performance of reused pipe supports, it was found that, similar to the new products, the use of support pins, with thickness of 12 mm rather than 11 mm, can satisfy the safety certification value more appropriately. Therefore, regardless of the state of usage, it could be concluded that it is necessary to use 12 mm products, whose thickness is larger than that of the safety certification standard value of 11 mm, to improve the performance of the pipe supports.