• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.843-846
• /
• 2009

경부고속전철의 급전선에 의한 전력유도 대책을 위하여 건설 당시 정보통신부 고시에 의하여 시행되었다. 통신선에 장애를 유발할 수 있는 전자유도 대책을 위해서는 국가 기술기준에 의한 유도전압 한계치가 정해져 있고 현장 대책 상 이 제한치를 초과할 때에 필요한 것이므로 상기 정부 고시의 기술 근거에 의해 유도전압을 계산하여 조치하고 있다. 전기철도시스템에서 지역 구간상의 전력 공급을 위한 일정 거리마다 급전소가 시설되어 있어서 이로부터 전철에 전력이 공급되고 있다. 전철의 유도현상에 의한 유도전압 분포 분석을 위한 전국 구간 유도측정을 수행하여 급전구간에서의 유도전압 특성을 파악하였다. 구간 중심점상에서 낮아지는 전압에 대해 급전소 근접 구간에 이르렀을 때의 전압 상승 특성을 분석하였다. 급전소로부터 귀로되는 전류의 양이 집합됨으로 유도전압이 높아지고 거리가 멀어질수록 전압은 떨어진다. 유도대책을 전압 분석에 있어서와 차폐시설물의 연계 활용 시 이러한 전압의 영향성을 고려할 필요가 있다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4B
• /
• pp.329-337
• /
• 2009

In this study we briefly introduce the electronic float system based on the GPS and RF communication technology and present some field application results. The system is capable of operating 15 floats simultaneously for making discharge measurement. Since the electronic floats (EFs) acquire flow paths, they can improve velocity measurement accuracy up to 10%. Additionally, measured velocities by the EFs show good agreement with those by an ADCP. Relative difference in sub-section area calculated by the electronic and conventional float methods is -79~71% and, due to convergent tendency of floats flowing along near banks, it increases much larger. It is possible to improve accuracy up to 5~6% in making discharge measurement by the electronic floats at site with irregular flow paths and section arrangement. The electronic float system is capable of calculating more accurate velocity and section area using position information based on GPS. By real-time measurement of velocity, cross-section area and discharge, the electronic float system is expected to reduce manpower and improve accuracy, rapidity and efficiency of flood discharge measurements.

• 한국IT서비스학회:학술대회논문집
• /
• 2009.05a
• /
• pp.229-232
• /
• 2009

이 논문에서는 디지털펜과 필기체 인식 기술을 이용한 업무 프로세스 개선 프레임워크인 UFS(Ubiquitos Forms Solution)를 제안하고, 차량점검 서비스를 기반으로 구현 결과를 보인다. 제안한 UFS 프레임워크의 설계 및 구현은 새로운 서비스 개발에 있어 재사용성, 확장성, 이동성, 사용 편이성에 중점을 두었다. UFS 기반 서비스는 디지털펜과 종이를 활용하여 현장 업무 정보를 취득함과 동시에 디지털 사본을 생성하고, 미리 정의된 영역에 대해 필기체 인식을 수행하고, 인식 결과에 대해 최소한의 확인 과정만으로 업무 시스템에 데이터를 자동 입력할 수 있다. 제안한 UFS 프레임워크는 전통적인 종이문서 기반 업무가 많은 헬스케어.건설.교육.공공 분야의 서비스 구현에 적용될 수 있다.

• Smart Media Journal
• /
• v.1 no.2
• /
• pp.47-53
• /
• 2012

Wind energy is currently the fastest growing source of renewable energy used for electrical generation around world. Wind farms are adding a significant amount of electrical generation capacity. The increase in the number of wind farms has led to the need for more effective operation and maintenance procedures. Condition Monitoring System(CMS) can be used to aid plant owners in achieving these goals. In this work, systematic design procedure for artificial neural network based normal behavior model which can be applied for fault detection of various devices is proposed. Furthermore, to verify the design method SCADA(Supervisor Control and Data Acquisition) data from 850kW wind turbine system installed in Beaung port were utilized.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.183-184
• /
• 2017

Some of the information created during the design phase of an New NPP life cycle is useful only for the execution of the construction phase; however, much of the information greatly impacts the longer-term operational phase. To most make use of design and construction information produced by data based design system during the construction and operation phase, This research is identified controlled data and drawn design information of controlled equipment from documents generated during the life-cycle stages. This study aimed to analyze related documents to assure traceability of controlled equipment from design phase through O&M and then suggested DB(Data Base) based control method on technical information of major equipment throughout nuclear power plant lifecycle.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.731-732
• /
• 2023

언리얼 엔진 기반의 메타버스나 실시간 게임 환경에서 캐릭터의 맞춤형 동작이 필요한 경우가 있다. 본 논문은 모션 디퓨전 모델을 활용하여 특정 동작을 자동 생성하는 기능을 제공하는 언리얼 엔진 플러그인을 제시한다. 특히 사용자가 텍스트로 신체 동작이나 감정 표현을 기술해 입력값으로 제공하면 서버에서 모션 디퓨전 모델로 애니메이션을 실시간으로 생성한 후, 언리얼엔진 클라이언트에서 후처리하여 사용자의 캐릭터에 실시간으로 적용하는 방식으로 구현했다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.745-753
• /
• 2021

Recently, a large fire occurred in a multi-use facility used by a large number of citizens, including the vulnerable, resulting in a lot of injuries and damages. Although several pilot studies have been conducted to reduce such incidents, the development of advanced disaster response technology using the latest spatial information and IoT technology is still insufficient. In this study, a pilot test bed is built to demonstrate detailed technologies derived through the first stage of realistic fire management technology research for the development of applied technology in the field. In detail, the building conditions and candidate sites of the test bed were first investigated and analyzed to derive satisfactory conditions and candidate target buildings. A second pilot test bed was then selected, and the necessary sensor and facility infrastructure were built to demonstrate the outcomes. Finally, a scenario was produced for technology verification, and a test bed system was developed. The pilot test bed is expected to contribute to verifying intermediate outcomes of realistic fire management research projects, enhancing the quality of the developed technologies.

• Spatial Information Research
• /
• v.10 no.1
• /
• pp.1-14
• /
• 2002

Due to the rapid development in information technology, countries of advanced information technology and multi-national information communication industries have expanding their invesment in constructing a cyber territory or a cyber city, and even a cyber globe that combines the real world with the cyber world. As such, in order to keep up with the competition with other countries to secure the Invisible Continent, Korea cannot afford to fall behind in the preparation and efforts to construct a cyber territory. Therefore in preparation for the inevitable establishment of a cyber territory, this study defined the concept of a cyber territory clearly and proposed a promotional strategy needed by the government for the establishment of a cyber territory. A cyber territory is 'the dynamic second territory that realizes various values in various aspects through organically combining innumerable active bodies in a surreal space and that are created by systematically and optimally connecting the physical topographical space and activity of the first nation to the cyberspace'. To explain further, a cyber territory is defined as another simulated space not only to manage the land systematically and deal with administrative services far the greater population, but also to contain economic activities of corporations and the citizens' everyday lives in a virtual reality by digitizing the entire territory including even the sea. In order to establish such cyber territory, it is necessary to revise related laws and policies, to foster related technology and industry as a main engine for national development, to promote public awareness, and to train related human resources.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.185-193
• /
• 2006

The on-going pre-environmental investigation at present is performed by separate numerical analysis of each provision which makes integrated pre-environmental investigation is difficult. The application of numerical data is insufficient, which results to the deterioration of environmental investigation result's objectivity. A lot of time and money is required for the investigation. In this study, the spacial analysis function of GIS was applied on the 8 pre-environmental investigation factors. Pre-environmental investigation GIS DMS(Decision Making System) was constructed to make integrated investigation possible through the use of investigation results for each factor. Through the use of the developed pre-environmental investigation GIS DMS and the pre-constructed GIS data, the objectivity of environmental investigation is sufficient and time and cost are reduced. Therefore, this system can be used for pre-environmental investigation during route selection in the initial stages of road construction. Through the numerical and visual data obtained from the system developed in this paper, it is easier to gain the approval of the public. Furthermore, environmental problems due to road construction can be investigated with less time and money during the initial stages of road construction.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.1
• /
• pp.105-113
• /
• 2023

Jeollanam-do has 25 land-to-island and island-to-island bridges, the largest number in Korea. It is a local government rich in specialized marine and tourism resources centered on the archipelago and the sea bridges connecting them. However, in the case of sea-crossing bridges, when strong winds or typhoons occur, there is an issue that increases anxiety among users and local residents due to excessive vibration of the bridge, apart from structural safety of the bridge. In fact, in the case of Cheonsa Bridge in Shinan-gun, which was recently opened in 2019, vehicle traffic restrictions due to strong winds and excessive vibrations frequently occurred, resulting in complaints from local residents and drivers due to increased anxiety. Therefore, based on the data measured using IoT measurement technology, it is possible to relieve local residents' anxiety about the safety management of marine bridges by providing quantitative and accurate bridge vibration levels related to traffic and wind conditions of bridges in real time to local residents. This study uses the existing measurement system and IoT sensor to constantly observe the wind speed and vibration of the marine bridge, and transmits it to local residents and managers to relieve anxiety about the safety and traffic of the sea-crossing bridge, and strong winds and to develop technologies capable of preemptively responding to large-scale disasters.