• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2023.11a
• /
• pp.219-220
• /
• 2023

본 논문에서는 건축물의 고층화, 대형화로 외벽 청소, 도장, 견출, 검사등 작업시 손쉽고, 빠르며 경제적으로 작업을 위한 방법으로 작업의자형 달비계를 사용 하고 있으나 최근 3년간 유지·보수공사 작업시 근로자의 중대재해가 36명으로 신축·증축·재건축공사 2명으로 유지·보수공사에서 많은 중대재해가 발생되고 있는 실정으로 50억이상 신축 작업에서는 산업안전보건법에 의하여 관리감독자 및 안전관리자가 선임 되어 현장의 전반적인 안전관리 활동을 하고 있으나 50억 이하 소규모 작업장에서는 안전관리 할동이 전무한 실정이고 저가수주, 적정 공사기간 불가 및 산업안전보건관리비 미계상 등 근로자들에 대한 안전대책이 없고 외부 안전점검기관의 사각지대로 근로자의 안전 확보에 어려움이 있은 실정으로 사업주 및 근로자에 대한 안전교육 및 관리감독이 철저히 이루어져야 할 것이다

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.138-146
• /
• 2014

Structural safety as well as variety and aesthetics of building facade are currently gathering more attention in building construction and stone curtain wall is widely used in exterior wall. However, two main problems are existed in curtain wall construction method. One is an uniformity of construction quality and the other is a repair work of stone panels. Also, the noise and vibration occurring in construction may be cause of civil complaint. Therefore, a new method is needed to overcome these problems. This paper presents a new stone curtain wall system using under cut anchor and secondary holes that was developed in this study. Additionally, structural performance evaluation was conducted to verify the constructability and structural safety for wind pressure and seismic load. Through the evaluation of this method, improved constructability and economic efficiency were verified.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1406-1407
• /
• 2011

태양광발전은 태양의 복사에너지를 직접 전기에너지로 변환하는 시스템으로 가동부분이나 열기관이 없어 수명이 길고 운전과 유지보수가 용이하며 모듈로 구성되기 때문에 수요나 지형에 맞게 설계할 수 있다. 이러한 특성으로 인해 태양광 발전은 차세대 성장 에너지원으로 각광 받고 있으며, 최근 문제되고 있는 지구환경문제 해결에도 부합할 수 있는 잠재력을 갖고 있다. 또한 계통 연계형 태양광 발전시스템의 확대 보급시 태양광 발전시스템의 출력특성에 의한 기존 전력계통의 피크전력을 감소시키는 효과도 기대할 수 있다. 국내 태양광발전은 정부 지원정책에 힘입어 지속적으로 보급이 확대되고 있으며, 2009년도 기준으로 약 400 MWp 이상의 설비가 전력시장에 진입하여 상업 운전중에 있다. 태양광발전시스템은 육상에 설치하는 것이 주류를 이루고 있었으나 태양광 입지조건에 적합한 부지를 확보하는 것이 쉽지않기 때문에 최근에는 건물옥상이나 벽에 설치하는 사례가 증가되고 있다. 본 논문에서는 한전전력연구원(대전시 유성구 문지동)의 건물옥상에 설치되어 운전하고 있는 9.52kW급 BIPV 형식의 태양광발전시스템을 대상으로 2010년도 1년간의 운전특성에 대하여 분석 평가하고 이를 통해 BIPV시스템의 운전에 대한 기초자료를 제시하고자 한다.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.1
• /
• pp.51-61
• /
• 2014

Preventive maintenance of buildings has increased the importance of interest in that it is able to maintain the performance building has and to prevent a problem occurred in future. For improved preventive maintenance work, it should be performed to select works order clearly and preceded the accurate measurement for the state of works order. when measuring the conditions, measurement of the state of work order considering the various criteria is more effective than to measure by only criterion. But, there are something hard to evaluate exactly between the criteria because of decision-maker's subjective judgments. To solve these problems, this research proposes decision making support model to determine preventive maintenance works order using Fuzzy-sets. By using Fuzzy-sets when measuring state of work objects, it can be reduced vagueness of judgments by decision-makers. This model can be used as a tool for objective evaluation of preventive maintenance work orders and offer the guideline to perform decision-making.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.4
• /
• pp.383-389
• /
• 2013

Demand for high-rising building has arisen. However, its maintenance is usually executed by labour. It could have a severe problem. We proposed a gondola robot to solve it. In this paper, we designed a height estimation sensor for this gondola. It is consist of pan-tilt unit, ARS sensor, and laser sensor. The pan-tilt unit keeps the laser sensor to indicate the gravity direction by referencing the ARS. The laser sensor's range is vertical distance from gondola to ground. However, if there is an obstacle under the gondola, the distance includes its height. To filter it out, we apply a Kalman filter for the height estimation. If the estimated height is changed extremely, the filter decides that there is an obstacle. Then, it remembers the height of obstacle. Other extreme changes of height estimations are reflected. The experimental results using the proposed sensor system show detail flow of the height estimation.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.06a
• /
• pp.391-393
• /
• 2013

실내 측위 시스템은 실내 환경에서 위치 기반 서비스를 하는데 매우 유용하다. 그러나, Wi-fi 신호 등을 사용하는 일반적인 실내 측위 시스템들은 대부분 시스템의 설치와 유지 보수에 많은 비용이 소요된다. 마커를 기준으로 측위를 하는 영상 기반의 시스템도 있지만, 일반 사용자들에게 미적인 문제를 야기 시킬 수도 있다. 이 논문에서, 우리는 대부분의 공공장소에 이미 설치되어 있는 간판 등을 이용하는 새로운 영상 기반의 실내 측위 시스템을 소개한다. 간판의 위치와 방향은 그것들이 설치 될 때 해당 건물의 기준 좌표계에서 위치와 방향이 결정되기 때문에, 간판에 대한 사용자의 상대적인 위치와 방향을 얻어내면 건물의 기준 좌표계에서 사용자의 위치와 방향을 구할 수 있다. 실제 공공장소에서 수행 된 실험은 우리의 시스템이 실내 측위의 실용적인 방법이 될 수 있음을 보여준다.

• Journal of Digital Contents Society
• /
• v.9 no.2
• /
• pp.269-276
• /
• 2008

Recently, the concerning about cultural heritages has been increased. As a result, the protection, repairing and restoration of cultural assets have been actively in progress. The biggest project of cultural asset reconstructions is the restoration of Kyungbok Palace and it has been in proceed step by step since in 1989. The actual sizes of these traditional buildings have been measured and recorded for future maintenance. In this paper, the 3D computer graphic technique is used to help understanding the inner structures of the traditional buildings as well as their construction processes. In other word, the construction simulation of Keunjeongjun which is the center building of Kyungbok Palace have been produced using 3D computer graphic techniques. The purpose of this project is aiding people in understanding the process of traditional palace architecture in Korea.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.1
• /
• pp.70-76
• /
• 2012

The purpose of this study is to analyze of the operating characteristics of the Gas engine driven Heat Pump(GHP) and to reduce maintenance costs through the most Economical plan. As the zoning modifications that have economic effects were confirmed. Applications should be made with a similar purpose of the space. The combination of a modified space has led to reduced operating hours of the outdoor unit. The reduction of the outdoor unit operating hours, reducing maintenance costs accordingly. When analyzed at six years have elapsed, the amount of savings through zoning modifications is more than an additional construction cost. During the design phase, cost-effective operation of the GHP is required for the proper zoning plan.

• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.45-50
• /
• 2015

In Korea ranking sixth out of The world's greenhouse gas emissions, all Korean public buildings have to implement obligatorily renewable energy systems for energy production to reduce the greenhouse gas emissions from the energy consumed in operation, maintenance and management of buildings. The optimum combination and application rates for each energy source emerge from analyzing the trend of previous studies and the energy consumption is simulated by using a dynamic energy simulation program and the initial investment costs, the energy costs, the maintenance costs, the replacement costs emerge based on the calculated result. The result show that the total life cycle cost of 100% gerthermal is the lowest with \ 2,105,974,344 on the analysis results.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.2
• /
• pp.69-79
• /
• 2020

TRecently, smart cities that solve various problems in cities based on IoT technology are in the spotlight. In particular, cases of BIM application for smooth management of construction and maintenance are increasing, and spatial information is converted into 3D data through convergence technology and used for safety diagnosis. The purpose of this study is to create and combine point clouds of a multi-story building by using a ground laser scanner and a handheld LiDAR SLAM among UAV and LiDAR equipment, supplementing the Occluded area and disadvantages of each technology, examine the effectiveness of indoor and outdoor reverse design by observing shape reproduction and accuracy. As a result of the review, it was confirmed that the coordinate accuracy of the data was improved by creating and combining the indoor and outdoor point clouds of the multi-story building using three technologies. In particular, by supplementing the shortcomings of each technology, the completeness of the shape reproduction of the building was improved, the Occluded area and boundary were clearly distinguished, and the effectiveness of reverse engineering was verified.