• Composites Research
• /
• v.24 no.6
• /
• pp.31-36
• /
• 2011

According to the evaluation on GMT-sheet by molding conditions, fiber projection on the moldings surface was investigated. Fiber projection is one of the major defects on moldings surface due to matrix shrinkage. That is, fiber projection happens from different shrinkage of matrix and glass fiber. Height of fiber projection from moldings surface becomes smaller when molding pressure is higher during holding pressure and cooling process. Height of fiber projection is dominantly affected by molding pressure. With consideration of molding pressure, the formation of surface unevenness and change in fiber projection height was elucidated. In addition, coating layer is effective to suppress surface defects, and there is no fiber projection or crack in case that coating is applied. Coating layer improves surface roughness up to the level of the polypropylene which is a single material.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1508-1510
• /
• 1999

스퍼터 퇴적 $WO_3$ 박막에 대해 열처리에 따른 전기적특성 및 구조적특성을 각각 4탐침법 및 AFM 관측에 의해 조사해 보고, 또한 스퍼터링시의 산소가스 유량비에 따른 $WO_3$ 박막의 막질을 ESCA에 의해 평가하였다 실험 결과 열처리에 의해 $WO_3$ 박막 표면의 평균거칠기가 $2.45\AA$에서 $152\AA$으로 크게 증가함을 알 수 있었다 또한 스퍼터시 산소유량비에 따른 효과를 ESCA로 관측한 결과, 열처리전에는 주피크가 34eV에서 나타남에 비해 열처리 후에는 36eV전후에서 나타났다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.3
• /
• pp.540-547
• /
• 1994

Contact and frictional locking conditions and the effect of shielding due to contact at the facet, which could be represented by the difference in energy release rate, as a function of phase angle of loading are analyzed in this study for the case of interfacial cracks by assuming single crack-kink model. The analysis of contact effects on interfacial fracture resistance shows that relative shielding increases as the shear component was increased, which indicates a qualitative agreement with the previous experimental results.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.1
• /
• pp.45-54
• /
• 1993

동심 이중관내에서 사각돌출형 조도요소에 의한 비대칭 난류유동과 열 전달특성을, 열전달과 마찰계수에 미치는 조도의 합성효과를 조사하기 위해, 연구하였다. 이론해석에서는 한쪽면에 거칠기가 있는 평행평판의 유동에 대한 수정 플란틀 혼합길이(mixing length)이론의 난류모델을 속도분포와 마찰계수를 구하는데 사용하였다. 최대속도지점에서 안쪽과 바깥쪽의 두 속도형상들은 힘의 평형에 의해 매치(match) 시켰다. 그리고나서, 온도 분포와 열전달 계수를 계산하였다. 속도형상과 마찰계수들의 해석결과는 실험과 매우 잘 일치하였다. 마찰계수와 Nusselt number에 미치는 조도비, 조도에 대한 피치비, 그리고 반경비등과 같은 여러 변수들의 효과들을 조사하였다. 본 연구는 일정 임의의 조도 요소들이 전체적 효율 측면에서 볼 때 유리하게 열전달을 향상시킨다는 것을 증명하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.887-892
• /
• 2014

In a conventional magnetic abrasive polishing process, the polishing abrasives are mixed with ferrous particles and slight cutting oil to form a cluster of abrasives. However, when a tool rotates at a high revolution speed, most of the polishing abrasives are scattered away from it due to the increase in centrifugal force. This phenomenon directly reduces the polishing efficiency. The use of a highly viscous matter such as silicone gel instead of cutting oil for mixing is one method to solve this problem and increase abrasive adhesion. Another method to avoid high abrasive scattering is the application of wet magnetic abrasive polishing (WMAP). In WMAP, abundant mineral oil is preliminarily applied to the workpiece surface. This study experimentally evaluated the effect of WMAP on abrasive adhesion. The relationship between the amount of working abrasives and polishing conditions was characterized. Despite the lower adhesion ratio of polishing abrasives, the surface roughness was found to be significantly improved as the result of WMAP.

• The Journal of the Korea Contents Association
• /
• v.19 no.2
• /
• pp.277-283
• /
• 2019

In this study, low molecular weight chitosan (LC) was added to dental cement liquid at 0, 0.5, 1.0, and 2.0 wt% by weight for surface properties and oral bacteria adhesive of dental cement. The evaluated by net setting time and surface properties of surface energy on the surface roughness. The degree of oral bacterial adhesion was assessed using two strains of oral bacteria, S. mutans and E.coli. The results showed that the setting time at the LC0.5 group increased no statistically difference was observed (p<0.05). The surface roughness statically significant LC2.0 group and oral bacteria adhesion experiment results in contrast to the control group LC0, LC-added experimental group showed a somewhat lower adherent surface statistically significant difference was observed (p<0.05). It seems that this LC proved that surface properties and oral bacteria adhesion effect was demonstrated. Therefore, it was suggest that the additional effects of LC and research on a wide range of substances.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.12
• /
• pp.111-118
• /
• 2007

Hydroforming is a cost-effective way of shaping malleable metals such as steel into lightweight, structurally stiff and strong pieces. With the increased use of the hydroformed components in automotive and aerospace industries, it is important to know the variations of the mechanical properties in the hydroforming process far the safe and durable design purposes. The principal goal of this paper is to suggest a procedure to evaluate the variations of tensile and fatigue properties before and after a hydroforming process. A miniature specimen, which is 0.2 mm thick and 2.3 mm wide, is devised and tested to measure local mechanical properties. The effects of specimen size, defects, surface roughness, and hydroforming on the tensile and fatigue behaviors are discussed.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.119-119
• /
• 2003

ZnO는 최근에 발광소자로서의 가능성 때문에 주목받고 있다. ZnO 박막의 성장에는 주로 CVD법과 스퍼터법이 사용되는데, CVD법 중 하나로서 cyclic CVD라고도 불리는 ALE법은 기존 CVD법에 비하여 증착속도는 떨어지나 박막의 표면거칠기가 매우 작고 대면적의 증착에서도 두께균일도가 상당히 우수하며 증착온도가 낮은 장점이 있다. 본 연구에서는 발광소자로서 응용이 가능한 ZnO박막을 사파이어(0001) 기판위에 ALE법으로 증착하고 후열처리가 photoluminescencey(PL) 특성에 끼치는 효과를 조사하였다. DEZn(diethylzinc)와 $H_2O$를 소스로 사용하여 사파이어 기판위에 ZnO 박막을 성장시키었고 기판온도로서 ALE window 범위인 17$0^{\circ}C$와 CVD증착 온도범위인 40$0^{\circ}C$를 설정하여 증착 시키었다. 그 후 후열처리로서 산소분위기에서 800, 900, 100$0^{\circ}C$에서 1시간 열처리를 하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.28-28
• /
• 1998

단일 충돌제트의 경우 충돌면에서의 열전달 효과는 제트 출구와 충돌면 사이의 간격, 노즐 형상에 따른 제트출구의 초기조건, Re$_{D}$수 변화와 충돌면의 형상이나 표면거칠기 등에 따라 변화하게 된다. 그러나 수직 충돌제트의 경우 정체영역에서의 국소적인 열전달 향상은 용이하나 반경 방향으로 열전달이 점차 감소하게 된다. 따라서 충돌면의 전반적인 열전달 향상을 위해서는 열전달이 정체점보다 상대적으로 낮은 영역에서 열전달 향상이 필요하다. 또한, 실제 적용시 충돌면의 형상이나 협소한 공간에서 노즐위치의 제약으로 인하여 충돌제트가 수직으로 분사되는 경우보다 경사진 제트가 더욱 많이 응용된다. 더욱이, 수직충돌제트가 사용되는 많은 상황에서도 주위의 다른 공기 흐름의 영향으로 인하여 실제 제트가 경사각을 갖고 분사되어진다 이러한 경사충돌제트의 중요성에도 불구하고 경사충돌제트에 대한 연구는 수직충돌제트에 대한 연구보다 상대적으로 적게 이루어져 왔다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.4
• /
• pp.104-116
• /
• 1998

This paper provides a review of the performance for SM45C using the CNC lathe. Under the constant cutting area, the tool wear for large feed rate is more than the small feed rate, and the progress goes more rapidly as the cutting speed is increased. This is caused by the friction between the workpiece and the bite. The average cutting force increases as the feedrate increases, and decreases as the cutting speed increases. This is because the effective rake/shear angle becomes smaller as the feedrate becomes larger. The higher is the cutting speed and the aspect ratio (the ratio for depth of cut to feedrate), the lower is the cutting force and the surface roughness. Also, for the optimal selection of the cutting conditions, many experimental graphical data were obtained. That is, the cutting force, the tool life, and the surface roughness were measured and investigated as the depth of cut and the feedrate changed. And the size effect was examined as the depth of the cut varied.