• KIEAE Journal
• /
• v.12 no.1
• /
• pp.113-118
• /
• 2012

The photovoltaic is one of the most important sustainable technologies appliable to architectures. The power performance mainly depends on the installation conditions of them. This study aims to evaluate the power performance of photovoltaic system by the installation conditions, the tracking methods and reflecting mirrors. For the study, the Solar Pro computer simulations have been conducted on installation angles, solar azimuth and solar altitude. Also, the field mock-up tests are performed to of its application to verify the simulation results. Both the results of the experiment and the simulation have proved that the efficiency of 90-degree fixed angle method was higher than that of 30-degree fixed angle, the efficiency of altitude tracking was better than that of azimuth tracking method, and changing both the altitude and the azimuth together is more efficient rather than the shortened tracing way. In addition, the light-concentrating method in which the incidence angle of the sun is controlled by an adhered reflector has been analyzed to have better efficiency than the general method of tracing according to the orbit of the sun. Therefore, this thesis is expected to offer the basic data to set a more effective tracing-type of photovoltaic power generation system in the future. For this, more researches are to be conducted hereafter on a high efficiency drive motor and the establishment of an economic system.

• The Journal of Natural Sciences
• /
• v.8 no.1
• /
• pp.23-26
• /
• 1995

Operating characteristics of a $Cr^3+$:LiASF laser pumped by 640 nm and pulsed DCM dye laser are observed. The laser consists of a 93% reflectivity of half mirror and a total reflector, and the length between two mirrors is 3cm. Maximum efficiency is 10% for 22 mJ of pumping energy and the maximum slope efficiency is 19%.

• Korean Journal of Optics and Photonics
• /
• v.27 no.2
• /
• pp.61-66
• /
• 2016

We used transmission deflectometry to measure the three-dimensional shapes of optical components, and we used the Hilbert transform to retrieve the phases from measured deformed fringe images. Deflectometry is useful for measuring large-scale samples, and specular samples. We have retrieved the phases from deformed fringe images and Hilbert-transformed images, and have used the least-squares method to find the height information. We have verified that phase retrieval using Hilbert transform is useful by computer simulation and experiment.

• Korean Journal of Optics and Photonics
• /
• v.26 no.6
• /
• pp.312-317
• /
• 2015

We investigate the effect of laser-resonator mode size on the output of a Yb:YAG laser that is mode-locked by a semiconductor saturable absorber mirror (SESAM). We demonstrate that the smaller the product of the mode sizes at a SESAM and at a Yb:YAG crystal, the more stable the mode-locked output is. Also, we found numerically that there is a resonator length at which the mode-locked output occurs, regardless of the thermal lens effect of a Yb:YAG.

• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.198-202
• /
• 2006

Resonator stability condition, $M^2$ beam quality factor, and laser output power are analyzed for two types of two-rod Nd:YAC lasers with rod-end curvatures. Two laser rods with rod-end curvatures are positioned closely to each other or placed separately near each resonator mirror. Experimentally, the output powers and $M^2$ beam quality factors of those lasers are measured with and without thermal birefringence compensation, and compared to numerical analyses.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.3
• /
• pp.25-31
• /
• 2003

In this paper, proposed is a control system for a galvanometer which is widely used fer laser display, laser processing and marking systems. The galvanometer with mirror is modeled as a second-order dynamic system Based on frequency responses and time domain responses of the developed model, a conventional PID controller is designed And it is implemented using a DSP(TMS320C32) chip with precision A/D and D/A converters. Through frequency response and experimental results, it is convinced that the proposed control system works well in real environment. Furthermore it is very easy to be connected to any PC because of USB communication port, and the cost of the marking system can be lowered very much because the DSP do the all the jobs for generating font motion as well as controlling the galvanometer.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.29-32
• /
• 1996

기존의 안과 진단 및 치료 기기의 안구 고정장치는 진단 및 치료에 있어서 피검사자와 검사자에 사이에 충분한 협조가 되지 않을 경우 진단의 비효율성과 치료의 안정성등의 문제가 발생하고있다. 따라서 이러한 문제를 보완하기 위하여 SLO의 전면 세극등을 소형의 반사경으로 대치하고 표시등을 후면의 먼거리에 수직으로 배열시켜서 피검사자에게 적당한 높이의 고정등을 선택하게하여 수직방향의 안구 위치를 고정시키고 SLO(Scanning Laser Ophthalmoscope)의 좌우 회전기능으로 표적의 수평방향을 근절시킨 후에 검사자의 조작으로 원격조정되는 서보장치를 이용하여 다시 반사경을 전방향으로 미세하게 회전되게하여 정확한 위치로 안구를 이동시키게 하는 원격조정 표적 추적장치를 개발하였다. 이에 따라 피검사자는 거울에 비친 먼거리의 허상을 보게 되어 세극등을 이용한 근접주사방식의 단점인 안구의 축동, 폭주등으로 인한 환자의 눈의 피로를 최소화하면서 피검사자의 안구를 검사자가 원하는 위치로 고정시킬 수 있게 함으로써 임상실험에서 안과 진단의 정확성과 관리도를 높이고 치료의 효율성과 안전성을 증가시킬 수 있는 원격조정 추적장치로써의 성능을 확인하였다.

• Journal of The Korean Association For Science Education
• /
• v.43 no.3
• /
• pp.253-263
• /
• 2023

This study explored the discrepancy between the text of a teacher's guide about straight and reflective light and the content knowledge of pre-service elementary teachers. A total of 455 questions and 543 answers generated by 279 pre-service elementary teachers after reading a 'Shadow and Mirror' unit in the teacher's guide were analyzed. The questions were classified according to the types of concepts and discrepancies, and the answers were analyzed for accuracy. The results of analyzing the concepts of questions revealed that the pre-service elementary teachers were most curious about the shadow in the straight concept, the mirror image in the reflection concept, and the light source in other concepts. The questions with a low correct answer rate due to incorrect- or non-answers, such as those concerning the superposition principle of light by reflection, the principle of experimental tools, and images by lenses, were only partially or not included in the teacher's guide. When the questions were classified according to the type of discrepancy, the frequency of questions due to knowledge deficit was higher than that due to knowledge clash. This demonstrates that the concepts that teachers need to know must be supplemented with the contents of the teacher's guide. Discrepancies due to knowledge clashes are often caused by conflicts between what is experienced in everyday life and what is presented in textbooks. Therefore, it is necessary to reduce the discrepancy between the texts of the teacher's guide and the knowledge of pre-service elementary teachers by including the differences between the actual context of everyday life and the context of the textbook in the teacher's guide.

• Korean Journal of Optics and Photonics
• /
• v.28 no.5
• /
• pp.213-220
• /
• 2017

This paper proposes how to fabricate an educational Mach-Zehnder interferometer that is easy to align and inexpensive, using 3D printers and semiconductor lasers. The interferometer consists of a body $165mm{\times}120mm{\times}57mm$ in size, mirror mounts, a laser holder, beam splitters, and so on. The laser path is adjusted by 4 mirror mounts, each comprised of rubber bands, small metal wires, and a screw. The interference fringe is enlarged by the lens at the final stage. The refractive index of a slide glass was measured by counting the number of moving interference fringes while the slide glass, inserted into one of the two interferometer arms, is rotating. The formula for the refractive index as a function of the optical-path difference and rotation angle was obtained, and used to calculate the refractive index of glass from the interferometer experiment. The use of a rotating glass in one arm of the interferometer nullifies the need for a precision stage, which despite its high cost is often required to observe the moving interference fringe in the classroom. Therefore, the 3D-printed Mach-Zehnder interferometer proposed in this paper can be very useful for education, because of its affordability and performance. It enables students to perform both qualitative and quantitative studies using a 3D-printed interferometer, such as measuring the refractive index of a glass sample, and the wavelength of light.

• Journal of the Korean Chemical Society
• /
• v.39 no.2
• /
• pp.94-102
• /
• 1995

S-Hydroxypropyl(PH) ${\beta}$-cyclodextrin(hydrophilic), dialkyl(DA)-cyclodextrin(hydrophobic), trifluoroacetyl(TA) ${\gamma}$-cyclodextrin(intermediate) stationary phases were used for gas chromatographic separation of racemic alcohols and their derivatives. All the alcohols used for this experiment were derivatived by using trifluoro acetic anhydride, acetic anhydride, or trichloro acetic anhydride. It is apparent that the enantioselectivity of the enantiomeric pairs was very dependent on the type of acylation reagent. The best experimental condition of optical resolution of the alcohols and their derivatives was different on the polarity of the solute molecules. The chiral separation was also studied depending on temperature, polarity of the column, and hydrogen bonding ability and steric effect between the alchols and CD stationary phase. The chiral recognition mechanism is dependent not upon the kinds of the chiral stationay phases but upon the derivatization of the racemic alchols.