• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.648-652
• /
• 1994

Lower Arm은 전차축식 현가장치에 사용되는 자동차부품으로 바퀴에서 발생되는 제동력이나 코너링력 등을 지탱하는 장치이다. V형의 상하 2개의 서스펜션암의 축에 의해 츠레임에 장착되고 좌우에 있는 Lower Arm끝부분은 볼조인트 및 부싱에 의해 스티어링 너클에 부착된다. 압입부품들은 자동차의 주행중 발생하는 외력에 의하여 이탈될 수 있는 위험성에 항상 노출되어 있어 자동차에 사용하는 압입부품들의 이탈력은 매우 중요하지만 한번 이탈시킨 Lower Arm은 이탈력이 현저히 저하되기 때문에 이탈력 측정에 의한 품질관리는 전량검사가 불가능하게 된다. 본 연구는 Lower Arm에 압입되는 볼조인트의 압입력을 압입거리에 따라 측정하여 Lower Arm에 뚫어진 볼조인트 압입구멍의 크기와 압입력의 상관관계를 실험적으로 구할수 있는 크기와 압입력의 상관관계를 실험적으로 구할 수 있는 모니터링 시스템을 개발하고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.4
• /
• pp.430-436
• /
• 2012

This study was conducted to measure battery's voltage drop in a compact electric vehicle to get driving performance in various driving situations. In the experiment, to evaluate the energy consumption and milage, system performance have measured with changing of the driving speed and the reduction of driving distance when the heater was operating. The battery of the car in this study is lead type storage battery. The driving velocity was changed from 10km/h to 50 km/h with 20km/h intervals and the operating step of the heating device. As results, the electronic consumption rate was maximum at 35 km/h of vehicle speed and if the driver turning the heater at maximum, capacity will lead to 35% of energy consumption increment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.262-266
• /
• 2013

A new concept of periapical radiography, intra oral x-ray tube and detector system is introduced. It is new system that a miniature x-ray tube is inserted into mouse and it acquired digital image using external detector. In this study, we have investigated temperature and dose distribution of insertional x-ray tube for periapical radiography. To analyze temperature characteristic of x-ray tube, we attached the thermocouple to surface of x-ray tube and we measured the temperature according to distance. Also, we measured the dose distribution of a miniature x-ray tube according to distance. As a result, temperature was constant to $27^{\circ}C$ over 2mm without cooling system, dose distribution of x-ray tube was 3.14 and 1.84mGy in 3 and 5cm, respectively. Therefore, the proposed x-ray system works in lower dose than conventional dental x-ray system. Thus, it is considered that new concept of system will have a significant effect on medical imaging technology.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.156-163
• /
• 2015

In this paper, we propose an active water level and distance measurement algorithm using a light beam pattern. On behalf of conventional water level gauge types of pressure, float-well, ultrasonic, radar, and others, recently, extensive research for video analysis based water level measurement methods is gradually increasing as an importance of accurate measurement, monitoring convenience, and much more has been emphasized. By turning a reference light beam pattern on bridge or embankment actively, we suggest a new approach that analyzes and processes the projected light beam pattern image obtained from camera device, measures automatically water level and distance between a camera and a bridge or a levee. As contrasted with conventional methods that passively have to analyze captured video information for recognition of a watermark attached on a bridge or specific marker, we actively use the reference light beam pattern suited to the installed bridge environment. So, our method offers a robust water level measurement. The reasons are as follows. At first, our algorithm is effective against unfavorable visual field, pollution or damage of watermark, and so on, and in the next, this is possible to monitor in real-time the portable-based local situation by day and night. Furthermore, our method is not need additional floodlight. Tests are simulated under indoor environment conditions from distance measurement over 0.4-1.4m and height measurement over 13.5-32.5cm.

• Journal of the Korean Society of Radiology
• /
• v.11 no.4
• /
• pp.221-225
• /
• 2017

To evaluate the performance of ultrasound imaging system, we investigated the change of spatial resolution according to changing sonic velocity change parameter provided by ultrasound equipment. Ultrasound phantom images were obtained using a 3.0 ~ 5.0 MHz convex transducer in an ultrasound diagnostic device used at a medical institution located at Iksan. N-365 multi-purpose ultrasound phantom was used to measure longitudinal distance measurement accuracy and longitudinal and transverse resolution. In the same manner, the sonic velocity of the ultrasound equipment was changed from 1580 m/sec to 1400 m/sec in six steps, and the full width at half maximum(FWHM) was measured using the image J program to determine whether the measured values were different. As a result, lateral resolution was measured from 1.91 mm to 5.3 mm according to the speed change, and the smallest FWHM was 1.91 mm at 1420 m/sec. The axial resolution was measured from 1.03 mm to 1.14 mm according to the speed change, and the smallest FWHM was 1.03 mm at 1400 m/sec. The slower the sound velocity of the ultrasound equipment, the shorter the length of longitudinal measurement.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.197-203
• /
• 2015

Nuclear power plant has increased continuously for power production in all over the world and the interest about nuclear accident and the dismantling of aging nuclear power plant has been a growing. The leaked radioactive source that is generated by radiation accidents must detect and remove to minimized the damage as soon as possible. Gamma-ray detection system that have been developed until now cannot provide the precise position of radioactive sources because they detect and imaging the position of radiation sources in just two dimensions. In this paper, stereo gamma ray detection system has developed and the algorithm for calculation of the distance has implemented to be able to measure the distribution of the leakage gamma ray source for the system. Stereo camera calibration for distance detection was conducted with the correction pattern and LED light and we carried out performance test of the system for the LED light source and a gamma ray source. In both experiments the results of the performance test, it was confirmed to have a 5% error. The results of this paper is used as a material for the development of gamma-ray imaging device.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.5
• /
• pp.462-471
• /
• 2008

Flight recoder is used to analyze the accident factors and prevent the accident. In the analysis of the flight recorder, the most important factor is how to estimate the precise location of the flight. Traditional aviation navigation is based on stable sensors such as DME and VOR. In order to enhance the precision of the location estimation, the integrated navigation algorithm is designed to incorporate DME, Air data sensors and INS(Inertial Navigation System). The results demonstrate that the proposed algorithm can achieve better accuracy, comparing with the traditional navigation schemes, in flight location estimation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.455-463
• /
• 2007

In this paper, it is proposed how to implement the object detection system which is able to apply to vehicular applications, unmanned facilities, automatic door and others with microwave. As the technology which detects an object with microwave is becoming more popular, it seems impossible to avoid mutual interference and jamming caused by limited frequency bandwidth. The system in this paper detects an object by correlating the code of TX and RX signals with the pseudo-random code having best quality in interference and jamming environment. In order to generate simulant doppler signal for detecting the distance of an fixed object where there is no doppler effect, the phase of TX signal is shifted continually. Also, the saturation of receiver was removed and the error of distance measurement was decreased by controlling the power of TX signal for getting constant RX signal. The proposed system detects a object which ranges from 0.5 m to 2.0 m and informs vocally whether there is the object within 1.0 m or not.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.21-21
• /
• 2009

현장의 GMA 용접기는 일반적으로 용접기 본체로부터 와이어 송급장치까지의 거리가 약 50m 정도 떨어져 있고 송급장치로부터 토치까지의 거리는 약 3~5m 정도이다. 특히 국산 GMA 용접기의 와이어 송급장치는 DC 모터의 일종인 프린트모터를 사용하고 있으며 제어기는 오픈루프 제어를 하고 있다. 따라서 와이어 송급속도의 변동을 보상할 수 있는 어떤 수단도 장착되어 있지 않다. 또한 송급장치와 토치간 와이어를 안내하는 케이블 도관의 마찰 때문에 토치 끝단에서의 와이어 송급속도가 불규칙해질 수밖에 없다. 용접 시 와이어 송급속도의 순간적인 변동 때문에 용접부의 전류 파형이 매우 불규칙해지고 이 때문에 용융된 용적이 용융풀로 이행하지 못하고 스패터로 비산하는 현상을 발생시킨다. 본 연구에서는 이를 해결하고자 국산 SCR 용접기 및 인버터 용접기와 호환 가능한 디지털 제어형 와이어 송급장치와 Push-Pull 용접 토치를 개발하였다. 또한, 개발된 시스템을 이용하여 정 역 방향 제어기술을 적용하였고 아크 발생 시의 스패터 최소화 공정을 제안하였다. 실험은 SM490A 강재를 사용하여 BOP(Bead On Plate) 용접을 실행하였다. 용접 중 LabVIEW를 이용하여 아크 발생 초기 전류, 전압 그리고 와이어 송급속도를 측정하였고, 고속 카메라를 이용하여 용접현상을 분석하였다. 본 연구를 통해 아크 발생 초기의 스패터를 최소화하는 공정을 도출할 수 있었다. 용접공정 변수인 아크 발생 초기의 와이어 송급속도, 와이어의 역송급 진행거리 그리고 역송급 판단 시점의 용접 전류 값은 실험을 통해 얻을 수 있었다. 또한, 이 연구를 통해 개발된 시스템의 성능을 평가하였다.

• 전기의세계
• /
• v.39 no.5
• /
• pp.38-49
• /
• 1990

NOAA 위성에서 보내오는 고해상도(HRPT) 전좌신호를 추적하고 수신하는 수신장치의 개발을 소개하였으며, 또한 저해상도(ART) 수신 장치 및 수신된 화상을 얻는 방법을 소개하였다. HRPT는 직경 3m의 안테나로 1500km의 거리에 있는 NOAA 위성으로 부터 받는 반송파대 잡음비는 15dB 측정되어 2000km 이내의 위성 신호 수신이 가능함을 보였다. 위성추적은 산출된 위성궤도를 따라 자동적으로 위성을 추적하는 program추적으로 할 수 있으며, 전파신호의 도래 방향으로 안테나를 자동 이동시키는 monopulse 추적이 성공적으로 동작됨을 확인하였다. 전 시스템 중 포물면 안테나와 치치 그리고 철탑을 국내 업체에 주문 제작 하였으며 복조기를 제외하고 각종 프로그램을 포함한 전 시스템이 실험실에서 설계, 제작, 시험되었다. HRPT수신시스템은 과학기술처 특정연구와 체신부 전파연구소 연구사업으로 4개년에 걸쳐 수행되었다.