• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.4
• /
• pp.277-283
• /
• 2018

The crop growth model has been widely used for climate change impact assessment. Crop growth model require genetic coefficients for simulating growth and yield. In order to determine the genetic coefficients, regional growth monitoring data or yield trial data of crops has been used to calibrate crop growth model. The aim of this study is to verify that yield trial data of corn is appropriate to calibrate genetic coefficients of CERES-MAIZE. Field experiment sites were Suwon, Jinju, Daegu and Changwon. The distance from the weather station to the experimental field were from 1.3km to 27km. Genetic coefficients calibrated by yield trial data showed good performance in silking day. The genetic coefficients associated with silking are determined only by temperature. In CERES-MAIZE model, precipitation or irrigation does not have a significant effect on phenology related genetic coefficients. Although the effective distance of the temperature could vary depending on the terrain, reliable genetic coefficients were obtained in this study even when a weather observation site was within a maximum of 27 km. Therefore, it is possible to estimate the genetic coefficients by yield trial data in study area. However, the yield-related genetic coefficients did not show good results. These results were caused by simulating the water stress without accurate information on irrigation or rainfall. The yield trial reports have not had accurate information on irrigation timing and volume. In order to obtain significant precipitation data, the distance between experimental field and weather station should be closer to that of the temperature measurement. However, the experimental fields in this study was not close enough to the weather station. Therefore, When determining the genetic coefficients of regional corn yield trial data, it may be appropriate to calibrate only genetic coefficients related to phenology.

• Tuberculosis and Respiratory Diseases
• /
• v.64 no.6
• /
• pp.433-438
• /
• 2008

Background: Measurement of the maximum oxygen uptake in patients with chronic obstructive pulmonary disease (COPD) has been used to determine the intensity of exercise and to estimate the patient's response to treatment during pulmonary rehabilitation. However, cardiopulmonary exercise testing is not widely available in Korea. The 6-minute walk test (6MWT) is a simple method of measuring the exercise capacity of a patient. It also provides high reliability data and it reflects the fluctuation in one' s exercise capacity relatively well with using the standardized protocol. The prime objective of the present study is to develop a regression equation for estimating the peak oxygen uptake ($VO_2$) for men with moderate to very severe COPD from the results of a 6MWT. Methods: A total of 33 male patients with moderate to very severe COPD agreed to participate in this study. Pulmonary function testing, cardiopulmonary exercise testing and a 6MWT were performed on their first visits. The index of work ($6M_{work}$, 6-minute walk distance [6MWD]${\times}$body weight) was calculated for each patient. Those variables that were closely related to the peak $VO_2$ were identified through correlation analysis. With including such variables, the equation to predict the peak $VO_2$ was generated by the multiple linear regression method. Results: The peak $VO_2$ averaged $1,015{\pm}392ml/min$, and the mean 6MWD was $516{\pm}195$ meters. The $6M_{work}$ (r=.597) was better correlated to the peak $VO_2$ than the 6MWD (r=.415). The other variables highly correlated with the peak $VO_2$ were the $FEV_1$ (r=.742), DLco (r=.734) and FVC (r=.679). The derived prediction equation was $VO_2$ (ml/min)=($274.306{\times}FEV_1$)+($36.242{\times}DLco$)+($0.007{\times}6M_{work}$)-84.867. Conclusion: Under the circumstances when measurement of the peak $VO_2$ is not possible, we consider the 6MWT to be a simple alternative to measuring the peak $VO_2$. Of course, it is necessary to perform a trial on much larger scale to validate our prediction equation.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.565-572
• /
• 2001

The spatial genetic structure of Needle fir(Abies holophylla Max.) seedlings on forest gap within a Needle fir forest at Mt. Odae in Korea was analyzed on the basis of ISSR(inter-simple sequence repeats) marker analysis. The gap size was $1,500m^2(50m{\times}30m)$, and we sampled 416 one- or two-year-old seedlings by 2m intervals. Some trees at the upper crown layer except Needle firs and all trees at the middle and lower crown layers were removed, and Needle firs at the upper crown layer showed very weak growth strength or to be withering to death. The results of spatial autocorrelation using 31 polymorphic ISSR markers revealed that it was genetically homogeneous within spatial distance of 15.6m and the randomness of genetic distribution was from 15.6m to 31.2m. The genetic patch size of seedlings in forest gap might be restricted by the density of mother trees, making allow for the average height of adult Needle firs, the seed dispersal area, and the average distance between adults. For the directionality of seedling distribution, we investigated the variography using 'genetic configuration' which was the value of configuration in Multidimensional Scaling by genetic distance. In directional variogram, the increment of spatial distance from East to West direction was inversely proportional to genetic homogeneity. We presumed that this anisotrophy of seedling distribution at this forest gap resulted from the directionality of seed dispersal rather than the difference of fecundity between mother trees or the microhabitat variation, taking the evenness of forest floor condition, a vast seed production and the random distribution of seedlings at the studied site into consideration.

• Korea journal of population studies
• /
• v.20 no.1
• /
• pp.97-128
• /
• 1997

This paper was set out to study the structure of the career occupational mobility in the early and rapid phase of industrialization in Korea. By analyzing the individual life histories regarding occupational mobility and achievement, I propose a model of yearly career mobility of Korean men and Women during the period of 30 years between 1954 and 1983. With the occupational classification scheme of 5 groups - Upper Nonmanual, Lower Nonmanual, Self Employed, Manual, Farm - the mobility pattern in the person-year mobility table analyzed can be characterized primarily by the strong influence of immobility. The degree of immobility, however, is different by the occupational groups. The absolute amount of immobility can be summarized as being U-shaped. Overall, the pattern of mobility can be explained best by the concept of occupational distance. I then propose a model of relative career occupational mobility pattern that combines the conceptual and theoretical basis and the methodological rigor. The model is based on the notion of the reproduction of inequality, the labor market context, and the life history perspective. The model encompasses the 6 conceptual explanatory factors such as persistence effect, ceiling effect, traditional sector effect, nonmanual occupation effect, alternative mobility channel effect, and occupational distance effect, as well as the effects of both origin and destination occupations. The relative pattern of career mobiliity in Korea can be characterized by the following six findings. First, the persistence effect on the diagonal cells of the mobility table is dominant. Second, a clear evidence of the negative effect of occupational distance between nonmanual occupations and manual and farm occupations is found. Third, the out-mobility from farming took place regardless of the destination occupations. Fourth, the internal mobility within the nonmanual occupation block is high and bi-directional, and is exclusive against other occupations. Fifth, the 'self employed' occupation is serving a peculiar function in both inflow and outflow pattern. Last, the relative pattern of career occupation mobility is asymmetrical in terms of the upward and downward mobility.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.415-422
• /
• 2008

Pumping test was conducted to understand hydraulic conductivity for leaky confined aquifer with high permeability. Test aquifer was formed in $25{\sim}35\;m$ below ground surface at predetermined site of riverbank filtration which junction of Nakdong river and Milyang river in the Ttaan isle, Gimhae city, Korea Monitoring wells were located at intervals of 2 m and 5 m from pumping well in south-west direction (MW1 and MW2 wells) and northeast direction (MW3 and MW4 wells), respectively. Pumping test was continuously conducted for constant pumping rate of $2,500m^3/day$, hydraulic conductivity was estimated using AQTESOLV 3.5 program. Hydraulic conductivity were estimated to be $1.745{\times}10^{-3}m/sec$ for pumping well (PW), $2.452{\times}10^{-3}m/sec$ for between PW and MW1 wells, $2.161{\times}10^{-3}m/sec$ for between PW and MW2 wells, $2.270{\times}10^{-3}m/sec$ for between PW and MW3 wells and $2.591{\times}10^{-3}m/sec$ for between PW and MW4 wells. The function of hydraulic conductivity (K) as monitoring distance (d) were estimated to be logK = 0.0693logd - 2.671 for south-west direction (PW-MW1-MW2 line), logK = 0.0817logd - 2.655 for north-east direction (PW-MW3-MW 4 line). Scale exponent of hydraulic conductivity as test volume was estimated using Schulze-Makuch et al.(1999) method. Scale exponent of this aquifer was estimated to be 0.15. It means that test aquifer has very low heterogeneity. The radius of influence estimated using transmissivity, maximum groundwater level displacement, distance from pumping well and pumping rate during pumping test were 7.148 m for south-west direction and 6.912 m for north-east direction. The increasing rate of hydraulic conductivity from pumping well to maximum radius of influence were estimated to be 1.40 times for south-west direction and 1.49 times for north-east direction. Thus, heterogeneity of test aquifer was a little higher in north-east direction.

• Journal of Chest Surgery
• /
• v.32 no.3
• /
• pp.249-254
• /
• 1999

Background: Recovery of the left atrial contractile function after the Cox-Maze procedure is related to the size of the left atrium. We have postulated that if too wide area of the atrium were isolated electrically, then the atrial contractile function would be impaired postoperatively. We have modified the Cox-Maze procedure to dissect each pair of the pulmonary veins separately instead of the conventional pulmonary vein encircling incision, and compared the atrial contractile function after each procedure. Material and Method: From February 1995 to October 1997, 55 cases of the Cox-Maze procedure were performed in mitral valvular heart disease. We excluded the cases that did not covert to sinus rhythm. The patient groups were divided according to the interpulmonary vein distance(IPVD) and the procedure performed. Group I was IPVD under 6.5 cm(n=30), group II was IPVD over 6.5cm and the conventional Cox-Maze III procedure was performed(n=16), and group III was IPVD over 6.5cm and the modified Cox-Maze procedure was performed(n=9). Result: Atrial contractile function was evaluated by the echocardiography follow-up between 6 months to 12 months. The right atrial contractile function recovered gradually, the recovery rate after long-term follow-up was 90% in group I, 81% in group II, and 100% in group III(p>0/05). In the left atrium the recovery rate was 63% in group I, 31% in group II(p=0.03), and 66% in group III(p>0.05). Conclusion: The modified Cox-Maze procedure may have beneficial effects on the recovery of the left atrial contractile function, however, there are no statistically significant values. Therefore, further evaluation of this procedure is necessary.

• Journal of Plant Biotechnology
• /
• v.29 no.3
• /
• pp.151-159
• /
• 2002

Genetic map and molecular marker have a great importance in improving and facilitating crop breeding program as well as in genome analysis and map-based cloning of genes representing desirable characters. This study aimed at developing RAPD markers and constructing a genetic linkage map using 82 BC$_1$F$_1$individuals originated from the cross between '835' and B$_2$in radish (Raphanus sativus L.). One of the parents for genetic linkage map construction, '835'(P$_1$) of egg type is susceptible to Fusarium wilt and have medium resistance to virus infection and the other parent, B$_2$(P$_2$) of round type, is susceptible to Fusarium wilt and virus, Screening of 394 RAPD primers in BC$_1$F$_1$) population resulted in selecting 128 polymorphic markers which displayed 1:1 segregation pattern. Two markers failed to display 1:1 segregation and showed the segregation ratio skewed to maternal genotype. Selected markers were categorized into 14 linkage group based on LOD score represented by MAPMAKER/EXP program. Five groups composed of single marker among them were excluded from the linkage map, and consequently, the remaining groups are well matched with the number of radish chromosome (n＝9). The linkage map constructed with 128 markers covers 1,688.3 cM and the average distance between markers was 13.8 cM. For developing STS marker, we determined the partial nucleotide sequence of OPE10 marker at both ends and designed a oligonucleotide primer pair based on this sequence. STS PCR using the primer pair displayed a single, clear band of which segregation is perfectly matched with that of OPE10 marker. This implies that RAPD markers could readily convert into clear and reliable STS markers.

• Journal of Life Science
• /
• v.31 no.12
• /
• pp.1088-1093
• /
• 2021

Jeju horse (Equus ferus caballus) is a Korean horse breed that has been native to Jeju Island for a long time. Jeju horses are used as racehorses, and their racing ability is a major economic trait. The role of the myostatin (MSTN) gene in skeletal muscle mass has been studied in various mammals, and mutations in the MSTN gene are known to affect the racing ability and stamina of thoroughbreds. In this study, we compared the frequency of mutations in the MSTN gene in several horse breeds, including 1,433 Jeju horses. Among the mutations (ECA18 g.66493737C>T) in the MSTN gene, the long-distance aptitude genotype (TT) was found to have a frequency of 0.826 in Jeju horses, which was higher than that in Halla horses (0.285) and thoroughbreds (0.252). The genotypes and arrival records of Jeju horses were compared according to various distances (400 m, 800 m, 900 m, 1,000 m, 1,110 m, and 1,200 m). According to the results, the CT type showed a faster-reaching record than the TT type in races of less than 1,000 m. However, almost identical results were confirmed in races over 1,110 m. This study suggests that the MSTN mutation in Jeju horses may be related to race distance aptitude. In future research, the data in this study can be used for developing markers related to race distance aptitude and racing abilities in Jeju horses.

• Journal of the Korean earth science society
• /
• v.43 no.5
• /
• pp.604-617
• /
• 2022

Sea surface temperature (SST) is a key variable that can be used to understand ocean-atmosphere phenomena and predict climate change. Satellite microwave remote sensing enables the measurement of SST despite the presence of clouds and precipitation in the sensor path. Therefore, considering the high utilization of microwave SST, it is necessary to continuously verify its accuracy and analyze its error characteristics. In this study, the validation of the microwave global precision measurement (GPM)/GPM microwave imager (GMI) SST around the Northwest Pacific and Korean Peninsula was conducted using surface drifter temperature data for approximately eight years from March 2014 to December 2021. The GMI SST showed a bias of 0.09K and an average root mean square error of 0.97K compared to the actual SST, which was slightly higher than that observed in previous studies. In addition, the error characteristics of the GMI SST were related to environmental factors, such as latitude, distance from the coast, sea wind, and water vapor volume. Errors tended to increase in areas close to coastal areas within 300 km of land and in high-latitude areas. In addition, relatively high errors were found in the range of weak wind speeds (<6 m s^-1) during the day and strong wind speeds (>10 m s^-1) at night. Atmospheric water vapor contributed to high SST differences in very low ranges of <30 mm and in very high ranges of >60 mm. These errors are consistent with those observed in previous studies, in which GMI data were less accurate at low SST and were estimated to be due to differences in land and ocean radiation, wind-induced changes in sea surface roughness, and absorption of water vapor into the microwave atmosphere. These results suggest that the characteristics of the GMI SST differences should be clarified for more extensive use of microwave satellite SST calculations in the seas around the Korean Peninsula, including a part of the Northwest Pacific.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.13 no.1
• /
• pp.2206-2217
• /
• 1971

Spillway and discharge channel of reservoirs require the Control of Large volume of water under high pressure. The energies at the downstream end of spillway or discharge channel are tremendous. Therefore, Some means of expending the energy of the high-velocity flow is required to prevent scour of the riverbed, minimize erosion, and prevent undermining structures or dam it self. This may be accomplished by Constructing an energy dissipator at the downstream end of spillway or discharge channel disigned to dissipated the excessive energy and establish safe flow Condition in the outlet channel. There are many types of energy dissipators, stilling basins are the most familar energy dissipator. In the stilling basin, most energies are dissipated by hydraulic jump. stilling basins have some length to cover hydraulic jump length. So stilling basins require much concrete works and high construction cost. Flip bucket type energy dissipators require less construction cost. If the streambed is composed of firm rock and it is certain that the scour will not progress upstream to the extent that the safety of the structure might be endangered, flip backet type energy dissipators are the most recommendable one. Following items are tested and studied with bucket radius, $R=7h_2$,(medium of $4h_2{\geqq}R{\geqq}10h_2$). 1. Allowable upstream channel slop of bucket. 2. Adequate bucket lip angle for good performance of flip bucket. Also followings are reviwed. 1. Scour by jet flow. 2. Negative pressure distribution and air movement below nappe flow. From the test and study, following results were obtained. 1. Upstream channel slope of bucket (S=H/L) should be 0.25<H/L<0.75 for good performance of flip bucket. 2. Adequated lip angle $30^{\circ}{\sim}40^{\circ}$ are more reliable than $20^{\circ}{\sim}30^{\circ}$ for the safety of structures.