• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.4
• /
• pp.103-112
• /
• 1990

For this study, the full-scale model of Chumsungdae was selected as an object, and various photographs were obtained with metric camera for forming circular strips and blocks. The accuracies were analyzed according to the change of object distance and different configuration of control points by bundle adjustment, and the characteristics of results obtained through combined strips were drawn. This thesis suggests optimal analysis technique of cylindrical structures requiring all-side analysis such as cultural properties. As a result, it is possible to use control points positioned on only any one-side for all-side analysis, and control configuration is more important rather than the number of control points for increasing accuracy. In addition, it is desirable to locate control points in X, Y and Z plane uniformly, and it was shown as object distance was shorten and the number of combined strips increases, the accuracy of results was improved considerably.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.4
• /
• pp.475-482
• /
• 2011

This study, a basic study to improve aerodynamic characteristic of a wind blade, explored through CFD how much the lift to drag ratio improves according to the shape of groove formed on the surface of airfoil NACA0015. This study found out that the ratio improves by 8.7% when the ratio between boundary layer(${\delta}$) and the depth of groove(h), the ratio between the depth of groove(h) and the width of groove(d) and the ratio between the length(p) from one groove to the other and the width of groove are 1.1, 0.1 and 1.2 respectively. The number of grooves is two. It was also confirmed that the improvement of the lift to drag ratio is maintained after certain angle of attack.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.701-701
• /
• 2013

표면조직화는 입사되는 빛의 반사를 줄이고 태양전지 내부에서 빛의 이동거리를 길게하여 효율을 향상시키는 중요한 요소가 된다. 결정질 실리콘 표면 조직화에서 일반적으로 알카리 습식 식각이 많이 사용되며 이 식각 방법으로 반사도를 400~1000 nm의 파장에서 평균 11%까지 줄일 수 있다. 본 논문에서는 빛의 반사를 더 줄여 단락전류를 향상 시키기 위해 기존 NaOH를 이용한 표면 조직화를 수행한 후에 반응성 이온 식각 공정을 적용하는 2단계 표면 조직화 공정을 최적화 하였다. 먼저 NaOH 2%, IPA 7.5%용액에서 $80^{\circ}C$ 유지하면서 35분간 식각을 한 후에 ICP 장치에서 SF6/O2 비율 1:1, 공정 압력 25 mTorr, 시간 200 s로 고정하고 RF 파워를 25~200 W로 변화를 주면서 실험 하였다. 그 결과 마이크로 크기의 피라미드 위에 나노 크기의 피라미드를 형성할 수 있었으며 400~1,000 nm 파장에서 평균 4.96%까지 반사도를 낮출 수 있었다. 기존 알카리 식각 공정에 비해 반사도가 많이 낮아지게 되어 입사되는 빛의 양이 증가함으로서 단락전류가 증가하고 효율이 향상될 것으로 기대된다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.121-124
• /
• 1996

In general, cellular manufacturing system can be constructed by the following two steps. The first step forms machine cells and part families, and the second step determines cell layout based on the result of first step. Cell layout has to be considered when cell is formed becauese the result of cell formation affects it. This paper presents a cell formation algorithm and proposes an integrated mathematical model for cell formation and cell layout. The cell formation algorithm minimizes the number of exceptional element in cellular manufacturing system. New concept for similarity and incapability is introduced, based on machine-operation incidence matrix and part-operation incidence matrix. One is similarity between the machines, the other is similarity between preliminary machine cells and machines. The incapability identifies relations between machine cells and parts. In this procedure, only parts without an exceptional element are assigned to machine cell. Bottleneck parts are considered with cell layout design in an integrated mathematical model. The integrated mathematical model determines cell layout and assigns bottleneck parts to minimize the number of exceptional element and intercell moving distance, based on linearixed 0-1 integer programming. The proposed algorithm is illustrated by using numerical examples.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.183-192
• /
• 2014

In this work, the mixture formation and atomization characteristics of biodiesel fuel were reviewed under various test conditions for the optimization of compression-ignition engine fueled with biodiesel. To achieve these, the effect of nozzle caviting flow, group-hole nozzle geometry and injection strategies on the injection rate, spray evolution and atomization characteristics of biodiesel were studied by using spray characteristics measuring system. At the same time, the fuel heating system was installed to obtain the effect of fuel temperature on the biodiesel fuel atomization. It was revealed that cavitation in the nozzle orifice promoted the atomization performance of biodiesel. The group-hole nozzle geometry and split injection strategies couldn't improve it, however, the different orifice angles which were diverged and converged angle of a group-hole nozzle enhanced the biodiesel atomization. It was also observed that the increase of fuel temperature induced the quick evaporation of biodiesel fuel droplet.

• Journal of Energy Engineering
• /
• v.20 no.2
• /
• pp.109-122
• /
• 2011

The production capacity of EV models should be sufficient to achieve the goal of one million EVs by 2015. Large-Format lithium-ion battery are expected to find a prominent role as ideal electrochemical storage systems in traction power train for sustainable vehicles such as all-electric vehicles. This review focuses first on the present status of production lithium-ion battery technology and cooperative relations of between battery and EV makers, then on its near future development.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.441-443
• /
• 2015

디지털 홀로그래픽 TV 시스템을 구현하려면 홀로그래픽 정보 획득 장치가 필요한데, 해상도 한계 때문에 홀로그램의 프린지 패턴을 상용 촬상 소자로는 직접 기록할 수 없다. 이를 극복하는 방법으로는 컬러 영상과 거리영상 정보를 얻은 후에 압축을 거쳐 수신 디스플레이단에 전송하고 이 정보로부터 3차원 모델을 형성한 후에 컴퓨터 생성 홀로그램을 생성하고 이를 회절소자를 이용하여 디스플레이하는 방법이 현재로서는 현실적인 방법이 될 것이다. 홀로그래픽 디스플레이에서는 회절소자인 공간광변조기 성능의 한계 때문에 기존 2DTV와 같은 수준의 디스플레이 구현은 매우 어렵다. 기존 공간광변조기는 픽셀피치가 커서 시야각이 매우 좁으나, 픽셀 크기를 작게 하는 동시에 공간광변조기 면적을 크게 하기에는 기술적인 어려움이 많다. 본 논문에서는 홀로그래픽 TV를 구현하는데 있어서 기술적으로 극복하고 고려해야 할 주요 요소에 대하여 분석한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.479-483
• /
• 2005

BBU is the weapon system for the extension of range through the reduction of base drag in 155mm. It has been mass-produced since 2000. The purpose of this research is productivity increase through the reduction of process lead time. Development process is as follows. First, formulation tests about propellent and liner, Second, spin test and final firing test about end products.

• Polymer(Korea)
• /
• v.27 no.2
• /
• pp.129-134
• /
• 2003

It has been known that the intercalation of long alkyl chains in montmorillonites (MMT) increased the hydrophobicity as well as gallery spacing of UT, which has influenced on the exfoliation behavior of various polymers. A series of organophilic MMTs were synthesized from the water/isopropyl alcohol solution of MMT with ammonium salts of various alkyl amines. The properties of obtained MMTs such as thermal decomposition temperature, gallery spacing as well as hydrophobic property were investigated. The X-ray diffraction experiments on organophilic montmorillonite demonstrated that the increase of length of alkyl substituent resulted in increase in the spacing between silicate layers, which was ranged from 13.1 to 29.4 $\AA$. On the other hand, introduction of (di-, tri-) alkyl substituents in ammonium salts decreased water absorption of organophiplic montmorillonite to 2.7%.

• Journal of the Korean Ceramic Society
• /
• v.41 no.2
• /
• pp.131-135
• /
• 2004

The effect of Co additive on the microstructural evolusion of WC was investigated. A small amount of Co powder was placed on the top-center of the pure WC powder compact and then sintered at 1950$^{\circ}C$. During sintering some abnormally large WC grains of different size and shape observed depending on the distance from the liquid source. However, in the region far away from Co liquid source, it showed low densification and the grains of WC were very small and uniform in size. A small amount of Co liquid phase has a remarkable influence on the AGG of WC and it has been explained in terms of 2-D nucleation and growth mechanism.