• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.841-846
• /
• 2000

The compression wave produced when a high-speed train enters a tunnel propagates along the tunnel ahead of the train. The micro pressure wave related to He compression wave is a special physics Phenomena created by high-speed train-tunnel interfaces. On this work, the method for reducing the micro pressure wave is to delay the gradient of the compression wave by using aerodynamic structures. The objective of this paper is to determine the optimum angle of the slanted portal using the moving model rig. According to the results of the present study, the maximum value of micro pressure wave is reduced by 19.2% fer the $45^{\circ}$ slanted portal installed at the entrance of the tunnel and reduced by 41.9% far the $45^{\circ}$ slanted portals at the entrance and exit of the tunnel. Also it is reduced by 34.6% for the $30^{\circ}$ slanted portals installed at the entrance and exit of the tunnel.

• 한국지반환경공학회 논문집
• /
• 제11권2호
• /
• pp.5-11
• /
• 2010

폐광산 주변의 광미장, 폐석더미로 인해 주변 지역의 토양 및 농작물들은 중금속으로 오염 될 수 있다. 본 연구는 주변토양 용도별, 농작물 재배품목별, 광산과의 이격거리별로 분류하여 광산 주변 중금속 오염실태조사를 수행하였다. 갱구인근 지역에서 Zn와 Pb이 토양오염기준치를 초과하였으며 다른 지역에 비해 광미장 지역과 논 경작지 토양의 중금속농도가 비교적 높은 것으로 나타났다. 광산과의 이격거리에 따른 중금속 농도는 갱구에서 거리가 멀어질수록 점차 감소하였다. 토양과 쌀 시료의 중금속 상관관계는 As와 Cd이 상관관계성이 있는 것으로 나타났으나 다른 중금속들은 관계성이 없는 것으로 조사되었다.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2004년도 춘계학술발표회 논문집
• /
• pp.47-59
• /
• 2004

본 연구에서는 동해고속도로 설계시 나타난 연속터널을 대상으로 하여 터널내 오염농도 해석 및 터널내 오염농도의 거동 및 터널 갱구부 주변의 오염물질의 재유입 여부를 분석하여, 연속터널에 대한 터널내 외부유동에 대한 환기영향을 검증하였다. 또한 연속터널 연결부에서의 캐노피 설치방안, 결빙대책 및 조도순응대책 등을 검토하여 연속터널에서의 환기 및 방재특성을 고려한 합리적인 고속도로설계가 되고자 하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.56-65
• /
• 2006

계획된 터널 갱구부에서 일부 구간(28m)이 용도폐기된 터널과 교차하여 안전한 시공을 위한 대책방안이 요구되었다. 폐터널은 계획터널과 계획고가 거의 같은 상태에서 경사교차하여 계획터널의 시공 중 안정성과 영구 안정성에 큰 위해 요소가 되었다. 본 터널 벽면을 관통하여 지반에 위치한 폐터널의 일정 구간을 버력과 시멘트 밀크 그라우팅으로 밀실하게 채워 안정성을 확보하였다. 되메움 후 폐터널 교차 구간 시공 시 그라우팅 core를 획득하여 물성시험을 통해 시공품질을 확인하였고, 시공 중 계측을 통해 안정성을 확인하였다.

• 터널과지하공간
• /
• 제8권1호
• /
• pp.46-52
• /
• 1998

The author conducted new back analysis method using monitoring data to a landslide which occurred around portal. In this case, because the tunnel being located under the sliding plane of the landslide, calculated value from the ordinary back analysis in which considered only stress release by the tunnel excavation didn't fit the measured value. Then, in the new method, a body force as the movement of the landslide mass was added to the ordinary back analysis and good results were obtained. Furthermore, the author carried out stability analysis of the landslide with the data of the back analysis and examined the loosened area and decreasing og the sliding plane strength due to the tunnel excavation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.925-930
• /
• 2006

During the excavation of a tunnel portal, failure zones around the tunnel heading occur and also the ground supports itself. In a portal, its location and the ground characteristic have a great influence on the stability of the tunnel. Therefore, the failure mechanism of a tunnel heading and how to assess the stability of the tunnel are very important. In this paper, the numerical analyses were executed to evaluate the safety factor using strength reduction technique. The influence area of an excavation was also predicted through a case study in which no-support case and support case with the Pattern P-6 were compared in terms of the ground class and the shear strain.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.745-750
• /
• 2005

The demand of tunnels has been increased for the linear improvement of general national highway, and road construction and/or enlargement in Korea. Also, the collapses of tunnel portal slope have been increased in recent due to heavy rain caused by global warming. Therefore, it has been risen the requirement of system for the stability of tunnel portal slope in Korea as well as all over the world. The objective of this research is to develop an effective maintenance system for supervising the tunnel portal slope. This paper is a basic proposal to execute a survey on the current status and state of the tunnel portal slopes that were already installed along general national highways.

• 대한기계학회논문집B
• /
• 제25권6호
• /
• pp.758-765
• /
• 2001

Purpose of the present is to investigate the food configuration at a tunnel entrance for reducing the micro pressure wave that is generated according to train speed. Two configurations were examined for tunnel of 0.5 km length. The experimental results show that a slit cover hood installed at the entrance of the tunnel reduces the maximum micro pressure wave by 41.2%, and a configuration with a slit cover hood installed at the entrance and a 45$^{\circ}$slanted portal at the exit of the tunnel suppresses it by 47.7%.

• 한국터널공학회:학술대회논문집
• /
• 한국터널공학회 2005년도 학술발표회 논문집
• /
• pp.359-371
• /
• 2005

The Cutting slope is to be minimized when a tunnel meets the contour of slope terrain at a right angle around its portal. However, a tunnel portal has been generally installed at a right angle to the longitudinal axis of a tunnel with no consideration of the intersection angle with the slope terrain. This sometimes tended to cause huge cutting slope that resulted in many disadvantage in terms of safty, economy and environment. Therefore, the minimization of cutting slope is studied by taking the intersection angle into account, and the result is compared with that by the conventional method. In addition a design method for the inclined portal to the tunnel axis is proposed through 3D-FEM analysis, also the applicable ground condition is suggested.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.619-624
• /
• 2000

The purpose of present study is to investigate for reducing micro pressure waves generated according to train speeds $(240km/h{\sim}380km/h)$ through tunnels with countermeasures as followings; the hood configuration in tunnel entrance. We developed hoods for tunnel of 0.5 km length in the condition of tunnel cross-section area of $107m^2$ on the slab track. According to the results the maximum micro-pressure wave is reduced by 41.2% for the slit hood installed at the entrance of the tunnel and reduced by 47.7% for the slit hood installed at the entrance of the tunnel and the $45^{\circ}$ slanted portal at the exit of the tunnel