• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.3
• /
• pp.457-464
• /
• 2011

Livestock manure compost (LC) generally contains high content of phosphorus, therefore can be a substitute for phosphorus fertilizers. In this experiment of the cultivation of lettuce in green house, the possibility of LC as a subsitute for phosphorus fertilizer was investigated and the fertilizer efficiency of nitrogen and potassium in LC as compared with chemical N fertilizer (urea) and K fertilizer (potassium chloride) was examined. In proportion to the increase in the application rate of nitrogen fertilizer, soil pH declined, whereas EC and $NO_3$-N content became higher. The application of LC appeared to increase the soil content of organic matter, available phosphate, exchangeable calcium, magnesium and sodium more than that of chemical fertilizer. Supplementation of the K fertilizer by the lack amount from the application of LC resulted in the same exchangeable potassium content in soil with NPK plot in which N, P and K fertilizers were applied by the amount of soil test recommendation. The relationship between soil $NO_3$-N content and nitrogen application rate from fertilizer and compost showed as y=0.57717a+0.19760b+74.65 ($R^2$=0.6347) in which y is the soil $NO_3$-N content (mg $kg^{-1}$), a is nitrogen application rate from fertilizer and b is nitrogen application rate from compost (kg $ha^{-1}$), respectively. From this equation, the supply ability of $NO_3$-N into soil of LC exhibited about 34% (pig manure compost 37.0, chicken manure compost 34.7, cattle manure compost 23.3) of nitrogen fertilizer (urea).

• Korean Journal of Environmental Agriculture
• /
• v.40 no.4
• /
• pp.353-358
• /
• 2021

BACKGROUND: Prochloraz has been widely used as an imidazole fungicide on fruits and vegetables in Korea. Analytical approaches to evaluate prochloraz residues in herbal medicine are required for their safety management. In this study, we developed a GC-ECD method for quantitative determination of prochloraz in Platycodi Radix. The metabolite 2,4,6-trichlorophenol (2,4,6-T) was used as a target compound to evaluate total prochloraz residues as it is categorized to a representative residue definition of prochloraz. All residues containing 2,4,6-T were converted to 2,4,6-T and subjected to GC-ECD. METHODS AND RESULTS: In order to verify the applicability, the method was optimized for determining prochloraz and it metabolite 2,4,6-T in Platycodi Radix. Prochloraz and its metabolite 2,4,6-T residuals were extracted using acetone. The extract was diluted with and partitioned directly into dichloromethane to remove polar co-extractives in the aqueous phase. The extract was decomposed to 2,4,6-T, and then the partitioned ion-associate was finally purified by optimized aminopropyl solid-phase extraction (SPE). The limits of quantitation of the method (MLOQs) were 0.04 mg/kg and 0.02 mg/kg, respectively for prochloraz and 2,4,6-T, considering the maximum residue level (MRL) of prochloraz as 0.05 mg/kg in Platycodi Radix. Recovery tests were carried out at two levels of concentration (MLOQ, 10 MLOQ) and resulted in good recoveries (82.1-89.7%). Good reproducibilities were obtained (coefficient of variation < 2.8%), and the linearities of calibration curves were reasonable (r² > 0.9986) in the range of 0.005-0.5 ㎍/mL. CONCLUSION(S): The method developed in this study was successfully validated to meet the guidelines required for quantitative determination of pesticides in herbal medicine. Thus, the method could be useful to monitor prochloraz institutionally in herbal medicine.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.3
• /
• pp.33-38
• /
• 2021

Recently, rollable and foldable displays are attracting great attention in the flexible display market due to their excellent form factor. To predict and prevent the mechanical failure of the display panels, it is essential to accurately understand the mechanical properties of brittle SiN_x thin films, which have been used as an insulating film in flexible displays. In this study, tensile properties of the ~130 nm- and ~320 nm-thick SiN_x thin films were successfully measured by coating a ~190 nm-thick organic nano-support-layer (PMMA, PS, P3HT) on the fragile SiN_x thin films and stretching the films as a bilayer state. Young's modulus values of the ~130 nm and ~320 nm SiN_x thin films fabricated through the controlled chamber pressure and deposition power (A: 1250 mTorr, 450 W/B: 1000 mTorr, 600 W/C: 750 mTorr, 700 W) were calculated as A: 76.6±3.5, B: 85.8±4.6, C: 117.4±6.5 GPa and A: 100.1±12.9, B: 117.9±9.7, C: 159.6 GPa, respectively. As a result, Young's modulus of ~320 nm SiN_x thin films fabricated through the same deposition condition increased compared to the ~130 nm SiN_x thin films. The tensile testing method using the organic nano-support-layer was effective in the precise measurement of the mechanical properties of the brittle thin films. The method developed in this study can contribute to the robust design of the rollable and foldable displays by enabling quantitative measurement of mechanical properties of fragile thin films for flexible displays.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.10
• /
• pp.21-29
• /
• 2021

Most concrete gravity-type dams in and out of the country were constructed by column method to control cracks caused by concrete hydration heat generated during construction, resulting in a certain level of leakage after impoundment through various causes, such as contraction joints and construction joints. However, due to the characteristics of concrete structures that shrink and expand according to temperature, concrete dams have vertical joints and drains to allow penetration. PVC waterproof shows excellent effects in completion of the dam, which however increases the possibility of interfacial failure due to different thermal expansion. Other causes of penetration may include problems with quality control during installation, generation of cracks due to heat of hydration of concrete, waterproofing methods, etc. In the case of Bohyunsan Dam in Yeongcheon, North Gyeongsang Province, the amount of drainage in the gallery was checked and underwater, and it was confirmed that there are many penetrations from drainage holes connected to vertical joints, and that some of the PVC waterproofs are not fully operated. As a new method to prevent penetration through vertical joints, D.S.I.M. (Dam Sealing Innovation Method) developed by World E&C was applied to Bohyunsan Dam and checked the amount of drainage in the gallery. As a result of first testing three most leaking vertical joints, the drain in the gallery was reduced by 87% on the average and then applied to the remaining 13 locations, which showed a 83% reduction effect based on the total drain in the gallery. Summing up these results, it was found that D.S.I.M. preventing water leakage from the upstream face is a valid construction method to reduce the water see-through and penetration quantity seen in downstream faces of concrete dams. If D.S.I.M. is applied to other concrete dams at domestic and abroad, it is expected that it will be very effective to prevent water leakage through vertical joints that are visible from downstream faces.

• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.143-152
• /
• 2008

This study was conducted to obtain basic information on mainstem, branch and leaf characteristics related to canopy for development of high yielding cultivar using 70 Korean soybean cultivars developed from 1913 to 2000. Variations of canopy width, branch length, and canopy width/length ratio were higher compared to other characteristics among 12 mainstem and branch characters. Variations of petiole angle, leaflet width/length ratio and compound leaf dry weight were higher than other characteristics among eight leaf characters related to plant canopy. Three classifications of soybean cultivars were used based on usage: I)soy sauce and tofu, II)bean sprout, and III)cooking with rice. Canopy width/length ratio was higher in group III, cooking with rice than group I, soy sauce and tofu, and group II, bean sprout, and there was no difference between the two, group I and group II. The total branch length/main stem height ratio was higher in group II, bean sprout and group III, cooking with rice than group I, soy sauce and tofu. Mainstem and branch characteristics related to plant canopy were classified into four groups by ratio of canopy width/length and total branch length/main stem length, respectively. Soybean cultivars with narrow canopy and high dependence of mainstem were Danweonkong, Keumkangkong, Shelby, and Shinpaldalkong. Soybean cultivars with broad canopy and high dependence of mainstem were Kanglim, Keumkangdaelip, and Jinyulkong, and a cultivar with broad canopy and high dependence of branch were Geomjeongkong 2. Leaflet length/width ratio was lowest in cooking with rice and there was no difference between soy sauce and tofu and bean sprout. Compound leaf area was largest in cooking with rice and smallest in bean sprout. Leaf petiole length was short in bean sprout and there was no difference between soy sauce and tofu and bean sprout. Leaf petiole angle was highest in cooking with rice and lowest in bean sprout. Leaf type was classified into four groups based on leaflet width/length ratio and compound leaf area, respectivly. Buseok and Taekwangkong had an oval leaflet and largest area of compound leaf. Eunhakong and Sohokong had extreme narrow leaflet and smallest area of compound leaf. Leaf petiole type was classified into three and four groups based on leaf petiole length and angle, respectively. A soybean cultivar with the shortest petiole length and smallest petiole angle was Eunhakong and cultivars with short petiole length and large petiole angle were Alchankong, Muhankong, and Pureunkong. A soybean cultivar with long petiole length and small petiole angle was Sinpaldalkong 2. Among a total of 70 Korean soybean cultivars, Eunhakong had an extreme narrow type in leaf, smallest compound leaf area, shortest petiole length, and smallest petiole angle of compound leaf.

• Journal of the Korean Society of Radiology
• /
• v.12 no.6
• /
• pp.737-743
• /
• 2018

Patient exposure dose exposure test, which is one of the items of accuracy control of Computed Tomography, conducts measurements every year based on the installation and operation of special medical equipment under Article 38 of the Medical Law, And keep records. The CT-Dose phantom used for dosimetry can accurately measure doses, but has the disadvantage of high price. Therefore, through this research, the existing CT - Dose phantom was similarly manufactured with a 3D printer and compared with the existing phantom to examine the usefulness. In order to produce the same phantom as the conventional CT-Dose phantom, a 3D printer of the FFF method is used by using a PLA filament, and in order to calculate the CTDIw value, Ion chambers were inserted into the central part and the central part, and measurements were made ten times each. Measurement results The CT-Dose phantom was measured at $30.44{\pm}0.31mGy$ in the periphery, $29.55{\pm}0.34mGy$ CTDIw value was measured at $30.14{\pm}0.30mGy$ in the center, and the phantom fabricated using the 3D printer was measured at the periphery $30.59{\pm}0.18mGy$, the central part was $29.01{\pm}0.04mGy$, and the CTDIw value was measured at $30.06{\pm}0.13mGy$. Analysis using the Mann - Whiteney U-test of the SPSS statistical program showed that there was a statistically significant difference in the result values in the central part, but statistically significant differences were observed between the peripheral part and CTDIw results I did not show. In conclusion, even in the CT-Dose phantom made with a 3D printer, we showed dose measurement performance like existing CT-Dose phantom and confirmed the possibility of low-cost phantom production using 3D printer through this research did it.

• Korean Journal of Breeding Science
• /
• v.50 no.4
• /
• pp.453-462
• /
• 2018

This study was carried out to investigate the utilization value of legume crops collected in tropical and subtropical areas. We examined agronomic traits to assess domestic adaptability and evaluated useful components of foreign legumes. We used a total of 201 genetic resources of three legumes, consisting of 68 lentils, 72 chickpeas and 61 guars. The average number of days to flowering of the three legumes ranged from 56.7 to 60.8 days; the shortest in guar and longest in chickpea. The average number of days to growth of the three legumes ranged from the shortest 86.8 days in lentil, to the longest 163.9 days in guar. The maturation period of the three legumes lasted from the end of May until mid-September, based on sowing in March. However, the average yield of lentil was very low, ranging from 0.5 g to 30.6 g, with an average 16.4 g based on 10 plants per accession. The average 100 seed weight of the three legumes was 2.2 g for lentil, 22.9 g for chickpea, and 3.8 g for guar. The crude protein content ranged from 14.1% to 32.4% with an average of 20.4%, the highest for guar and the lowest for chickpea. The average crude oil content in the three legume crops was generally low, ranging from 0.8% in lentil, to 4.3% in chickpea. The average dietary fiber content in the three legume crops varied from 15.7% to 50.7%. Guar was the highest source of fiber, followed by chickpea (19.3%) and lentil (15.7%). From the agricultural traits analysis, chickpea and guar could grow domestically. However, lentil was difficult to flower and fruit normally during the warmer season after May. Therefore, lentil should be considered for late summer cropping during the cool season. The physicochemical properties of the three legumes seem to be useful as they are similar to, or better than, those of the control common bean.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.2
• /
• pp.108-117
• /
• 2021

BACKGROUND: Dichlobentiazox is a newly registered pesticide in Korea as a triazole fungicide and requires establishment of an official analysis method for the safety management. Therefore, the aim of this study was to determine the residual analysis method of dichlobentiazox for the five representative agricultural products. METHODS AND RESULTS: Three QuEChERS methods were applied to establish the extraction method, and the EN method was finally selected through the recovery test. In addition, various adsorbent agents were applied to establish the clean-up method. As a result, it was found that the recovery of the tested pesticide was reduced when using the d-SPE method with PSA and GCB, but C₁₈ showed an excellent recovery. Therefore this method was established as the final analysis method. For the analysis, LC-MS/MS was used with consideration of the selectivity and sensitivity of the target pesticide and was operated in MRM mode. The results of the recovery test using the established analysis method and inter laboratory validation showed a valid range of 70-120%, with standard deviation and coefficient of variation of less than 3.0% and 11.6%, respectively. CONCLUSION: Dichlobentiazox could be analyzed with a modified QuEChERS method, and the method determined would be widely available to ensure the safety of residual pesticides in Korea.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.3
• /
• pp.204-212
• /
• 2019

The optimal application rate of a controlled release fertilizer (CRF) on the growth, yield, and seeding time of rice grown on seedling trays was investigated. The experimental field was located at $37^{\circ}22^{\prime}10^{{\prime}{\prime}}N$ latitude and $127^{\circ}03^{\prime}85^{{\prime}{\prime}}E$ longitude in Hwaseong, Gyeonggi-do, Republic of Korea. The soil in the paddy field was a clay loam. The CRF used in the experiment contained $300g\;kg^{-1}$ of nitrogen, $60g\;kg^{-1}$ of phosphate, and $60g\;kg^{-1}$ of potassium, respectively. The CRF was applied at the rate of 0, 200, 300, 400, 500, and 600 grams on rice seedling tray compared with the field application based on soil testing (control), respectively. The CRF can be applied as single application(which can replace basal fertilizer application and two top dressing application) directly to the seedling tray, and showed the minimum release at the seedling period. Considering the plant growth, nitrogen use efficency and yield of rice, the optimal application rate of developed CRF was 500 g per seedling tray and the yield of rice at this application rate was $4.92{\sim}5.04Mg\;ha^{-1}$. The regression formula between the rice yield and application rates of CRF was as follows ; "$Y=0.0002{\chi}^2+0.0963{\chi}+411.6$($R^2$ : 0.9922) in 2010 and $Y=8E-6{\chi}^2+0.2723{\chi}+344.04$($R^2$:0.9864) in 2011, Y : Rice yield ($Mg\;ha^{-1}$), ${\chi}$ : Application rate (grams) of controlled release fertilizer". The optimum application rates of CRF per rice seedling tray by regression formula was 498 grams in 2010 and 513 grams in 2011.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.4
• /
• pp.77-85
• /
• 2020

This study analyzes the effects of mixed fermented organic fertilizer on chinese cabbage growth and soil properties in order to investigate the nutritional effects of organic fertilizers, which are developed as an alternative fertilizer for imported castor oil cake. In this study, four treatments were set up: 100% and 200% rate of nitrogen application (320 kg ha-1 for Chinese cabbage) on mixed fermented organic fertilizer A(FA) and mixed fermented organic fertilizer B(FB), respectively, 100% rates of the mixed expeller cake (MEC) fertilizer, and the untreated control. Results revealed that the growth and yield of Chinese cabbage increased as more fermented organic fertilizer was used. However, while there were no significant differences in growth characteristics between treatments of 100% rate of mixed fermented organic fertilizer and 100% rate of MEC, the impacts on yields resulted similar. The nitrogen use efficiency (NUE) of Chinese cabbage was measured a range of 20-31% depending on the response to treatment. The 100% FA showed the same as NUE and nitrogen absorption with 100% rate of MEC. Regarding soil properties after cultivation, there were no significant differences among the effects of fertilizers in pH, EC, soil organic matter, and available phosphate. However, the content of exchangeable cations(K, Ca, Mg) was higher in areas treated with mixed fermented organic fertilizer than in untreated areas. Furthermore, the bacterial population density in the soil was higher in areas treated with mixed fermented organic fertilizer than in untreated areas and increased as more mixed fermented organic fertilizer was used. There were no significant differences in the population density of actinomycetes and fungi when fertilizer was applied to the soil. These results also show that FA, as a alternative organic fertilizer for imported castor oil cake, has similar nutritional effects as that of MEC. Therefore, further research the appropriate amounts of fertilizer is required to achieve economical and eco-friendly nutrient management.