• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.6
• /
• pp.40-45
• /
• 2016

It should be noted that the use of the lathe scrap for making fiber reinforced cementitious composites raised friendly environmental effect as well as economy because the lathe scrap is a by-product of steel manefactures and is occurred when lathe and milling works of them are conducted to process steel manufactures. Thus, the purpose of this experimental research is to investigate workability and strength characteristics of lathe scrap reinforced cementitious composites(LSRCCs). For this purpose, three types of lathe scraps were collected from processing plants of metal, and then LSRCCs containing these were made for 2mm width and 40mm length. As a result, it was observed from the test results that the workability of LSRCCs was slightly decreased than plain mortar and the flexural strength of LSRCCs were much larger than these of plain mortar and effect of types of lathe scrap on the characteristics of LSRCCs were somewhat large.

• Journal of the Society of Disaster Information
• /
• v.10 no.3
• /
• pp.432-441
• /
• 2014

The purpose of this research is to investigate characteristics of lathe scrap for manufacturing fiber reinforced cementitious composites(FRCCs) to use lathe scrap as a alternative materials of steel fiber. It should be noted that the use of the lathe scrap for making FRCCs raised friendly environmental effect as well as economy because the lathe scrap was a by-product of steel manufactures. For this purpose, various steel scraps were collected from processing plants of metal and then their physical properties were evaluated. Also, steel scraps were classified and analyzed according to the KS D 2101 and then of these scraps, lathe scrap as a alternative materials of steel fiber was suggested. In addition, FRCCs containing lathe scraps were made according to their total volume fractions of 0.0, 0.5, 1.0, 1.5, and 2.0% for water-binder ratios of 30%, 40%, respectively, and then characteristics, such as the workability, compressive strength, and flexural strength of those were evaluated. It was observed from the test result that the compressive strengths at 7 and 28 days of FRCCs containing lathe scrap were slightly small but the flexural strengths at 28 days of those increased by 10% compared with plain concrete.

• Journal of Korea Foundry Society
• /
• v.28 no.2
• /
• pp.57-63
• /
• 2008

• Journal of Korea Foundry Society
• /
• v.28 no.2
• /
• pp.52-56
• /
• 2008

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.38.1-38.1
• /
• 2009

산업이 발전함에 따라서 특수한 물성을 갖는 재료의 수요가 점점 증가하고 있는데최근 재료의 경량화, 화학적 안정화 등을 이용한 시스템의 효율성 향상, 환경오염방지 등과 같은 목적으로 사용재료의 고급화 추세가 현저해짐에 따라 티타늄 소재에 대한 관심과 수요가 증가하고 있다. 하지만, 국내에서는 티타늄 및 티타늄 합금의 원재료 및 가공제품을 대부분 수입에 의존하는 실정이다. 또한 티타늄 및 티타늄 합금의 스크랩의 경우 재활용률은 50~80%에 달하고 알려져 있으나 국내에는 이들의 재활용처리를 위한 시설이 없으며 폐기 또는 외국으로 저가로방출하고 있는 실정이다. 이에 따라 본 연구에서는 판재, 선재 및 관등의 기계 가공 시 주로 발생하는 티타늄 스크랩을 이용하여 HDH법을 이용하여 티타늄 분말을 제조하였다. 제조된 분말은 $900{\sim}1200^{\circ}C$의 온도범위에서 방전플라즈마소결공법을이용하여 소결체를 제작하였으며, 소결체의 강도, 경도 및미세조직 등을 평가하였다. 내식성향상을 위해 염화팔라듐을 이용하여 티타늄-팔라듐 분말 합금을 제조하여 티타늄 합금 분말의 소결체와 순수티타늄의 소결체와 내식성 비교를 위해 동전위분극시험을 통해 평가하였다.

• Resources Recycling
• /
• v.26 no.4
• /
• pp.9-18
• /
• 2017

Recently, the amount of electronic scrap is rapidly increasing due to the rapid growth of the electronics industry. Among the components of electronic scrap, the printed circuit board(PCB) is an important recycling target which includes common metals, precious metals, and rare metals such as gold, silver, copper, tin, nickel and so on. In Korea, however, PCB recycling technologies are mainly commercialized by some major companies, and other process quantities are not accurately counted. According to present situation, several urban mining companies, research institutes, and universities are conducting research on recovery of valuable metals from PCBs and/or reusing them as raw materials that is different from existing commercialization process developed by major companies. In this study, we analyzed not only current status of collection/disposal process and recycling of waste PCBs in Korea but also the trend of recycling technologies in order to help resource circulation from waste PCBs become more active.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.390-395
• /
• 1997

국내 원전연료 생산시설에서 발생되는 페지르칼로이를 이용하여 수소의 흡수ㆍ저장 가능성을 확인하였으며 $600^{\circ}C$에서 수소원자대 금속원자의 비율이 약 2.0으로 되는 것을 측정하였다. 지르칼로이의 수소화반응을 위해서는 100$0^{\circ}C$ 이상에서, 금속의 활성화 과정에 의한 금속 표면의 oxide film의 제거가 필요한 것으로 나타났으며 수소화반응은 15분 이내에 이루어지는 것으로 관찰되었다.

• Resources Recycling
• /
• v.25 no.2
• /
• pp.10-16
• /
• 2016

In this study, the Ni base superalloy was recycled by Argon oxygen decarburization(AOD) process using an inconel 713C scrap. During AOD process, argon gas was continuously injected 1,000 sccm and oxygen gas was injected into 10, 20 and 30 minutes of 100, 250 and 500 sccm.. In early stage of oxygen injection, the oxygen dose increased with increasing Al, Cr, and Mo content and decreasing C content. And Al content was decreased by carburization with added elements in late stage Because of oxidation was occurred with Al, Cr etc. after the reaction of carbon has been finished. From the results, the ratio of ${\gamma}^{\prime}$ phase reduced due to decreasing of Al content for that reason Al is the main element to form the ${\gamma}^{\prime}$ phase. Also carbide reduced owing to decreasing of C content so the mechanical properties of the specimens excessively injected by excess $O_2$ gas were decreased.

• Clean Technology
• /
• v.15 no.3
• /
• pp.172-179
• /
• 2009

The thermoplastic polyurethane waste (TPU-S) with good tensile properties, hardness, NBS abrasion resistance, specific gravity and low wet coefficient of kinetic friction was melt-blended with ethylene propylene diene monomer rubber (EPDM) with high wet slip resistance and low mechanical properties to form EPDM/TPU-S blend films, and their composition-property relationship was investigated to find the optimum composition for shoe outsole material. The properties except the wet slip resistance increased with increasing TPU-S contents in the blend. All the properties except elongation at break, specific gravity and the wet coefficient of kinetic friction in the range of $0{\sim}65\;wt%$ of TPU-S did not attain the values predicted by the simple additive rule. The optimum weight ratio of EPDM/TPU-S for the application to the typical shoe outsole material was found to be 30/70.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.414-417
• /
• 2014

LED scraps consisting of highly crystalline GaN and their leaching behavior are comprehensively investigated for hydro-metallurgical recovery of rare metals. Highly stable GaN renders the leaching of the LED scraps extremely difficult in ordinary acidic and basic media. More favorable state can be obtained by way of high temperature solid-gas reaction of GaN-$Na_2CO_3$ powder mixture, ball-milled thoroughly at room temperature and subsequently oxidized under ambient air environment at $1000-1200^{\circ}C$ in a horizontal tube furnace, where GaN was effectively oxidized into gallium oxides. Stoichiometry analysis reveals that GaN is completely transformed into gallium oxides with Ga contents of ~73 wt%. Accordingly, the oxidized powder can be suitably leached to ~96% efficiency in a boiling 4 M HCl solution, experimentally confirming the feasibility of Ga recycling system development.