DOI QR코드

DOI QR Code

Workability and Strength Characteristics of Lathe Scrap Reinforced Cementitious Composites

선반 스크랩 보강 시멘트 복합체의 작업성 및 강도 특성

  • 이현진 (안동대학교 토목공학과) ;
  • 배수호 (안동대학교 토목공학과) ;
  • 권순오 (안동대학교 토목공학과) ;
  • 김성욱 (한국건설기술연구원 구조융합연구소) ;
  • 박정준 (한국건설기술연구원 구조융합연구소)
  • Received : 2016.07.25
  • Accepted : 2016.10.19
  • Published : 2016.11.01

Abstract

It should be noted that the use of the lathe scrap for making fiber reinforced cementitious composites raised friendly environmental effect as well as economy because the lathe scrap is a by-product of steel manefactures and is occurred when lathe and milling works of them are conducted to process steel manufactures. Thus, the purpose of this experimental research is to investigate workability and strength characteristics of lathe scrap reinforced cementitious composites(LSRCCs). For this purpose, three types of lathe scraps were collected from processing plants of metal, and then LSRCCs containing these were made for 2mm width and 40mm length. As a result, it was observed from the test results that the workability of LSRCCs was slightly decreased than plain mortar and the flexural strength of LSRCCs were much larger than these of plain mortar and effect of types of lathe scrap on the characteristics of LSRCCs were somewhat large.

선반 스크랩은 금속 가공 공정에서 선반 및 밀링 작업에 의해 발생된 철강제품의 부산물이므로, 섬유보강 시멘트 복합체 제작시 이를 활용할 경우 경제성뿐만 아니라 환경 친화적인 효과를 가져온다. 따라서 이 연구의 목적은 강섬유 대체재료로서 선반 스크랩의 활용 방안을 제시하기 위하여 선반 스크랩 보강 시멘트 복합체(LSRCCs)의 작업성 및 강도 특성을 평가하는 것이다. 이를 위하여 금속 가공공장에서 3종류의 선반 스크랩을 채취한 후 폭 2 mm, 길이 40 mm로 가공하여 LSRCCs를 제작하였다. 그 결과, LSRCCs의 작업성은 플레인 모르타르보다 약간 저하되었고, 휨강도는 크게 개선되었으며, 선반 스크랩의 종류가 LSRCCs의 특성에 다소 영향을 미치는 것으로 나타났다.

Keywords

References

  1. Bae, S. H., Jeon, J. T., Kwon, S. O., Lee, H. J., and Kim, S. W. (2014), Characteristics Evaluation of Lathe Scrap for Manufacturing Fiber Reinforced Cementitious Composites. Journal of the Korean of Disaster Information, 10(3), 432-441. https://doi.org/10.15683/kosdi.2014.10.3.432
  2. Bdour, A. N., and Al-Khalayleh, Y. A. (2010), Innovative application of scrap-tire steel cords in concrete mixes. Jordan Journal of Civil Engineering, 4(1), 55-61.
  3. Granju, J. L., and Balouch, S. U. (2005), Corrosion of steel fiber reinforced concrete from the crack. Cement and Concrete Research, 35, 572-577. https://doi.org/10.1016/j.cemconres.2004.06.032
  4. Ha, J. H., Yi, N. H., Kim, S. B., Choi, J. K., and Kim, J. H. (2010), Experimental Study on Blast Resistance Improvement of RC Panels by FRP Retrofitting. Journal of the Korea Concrete Institute, 22(1), 93-102. https://doi.org/10.4334/JKCI.2010.22.1.093
  5. Im, N. K., and Jung, S. J. (1999), The Experimental Study on Strength Property on concrete using Blast Furnace Slag Aggregate. Journal of Architectural Institute of Korea, 15(6), 87-94.
  6. Jeon, C. K., and Jeon, J. K. (2014), A Experimental Study on the Flexural Behavior of Bandle Type Polyamide Fiber Reinforced Concrete. Journal of the Korea Society of Disaster Information, 10(1), 61-70. https://doi.org/10.15683/kosd.2014.10.1.061
  7. Jeon, J. K., Kim, S. G., Jeon, C. K., and Kim, K. H. (2015), Flexural Performance Evaluation of Organic Fiber Reinforced Concrete for Performance Improvement of Blast Resistance. Proceedings of Korea Concrete Institute, 27(1), 437-438.
  8. Kim, B. S., Kim, D. H., Lee, Y. D., and Lim, N. H. (2013), The Mechanical and Chloride Penetration Properties of Concrete Mixed with Various Fiber. Journal of the Architectural Institute of Korea Structure & Construction, 29(11), 45-52. https://doi.org/10.5659/JAIK_SC.2013.29.11.45
  9. Kim, K. C., Yang, I. H., and Joh, C. B. (2016), Material Properties and Structural Characteristics on Flexure of Steel Fiber-Reinforced Ultra-High-Performance Concrete. Journal of the Korea Concrete Institute, 28(2), 177-185. https://doi.org/10.4334/JKCI.2016.28.2.177
  10. Kim, S. K. and Choi, J. H. (2006), Compressive and Tensile Strength Properties of Slurry Infiltrated Fiber Concrete. Journal of the Korea Concrete Institute, 18(5), 703-708. https://doi.org/10.4334/JKCI.2006.18.5.703
  11. KS D 2101 (2011), Classification standard for iron and steel scraps, Korean Agency for Technology and Standard.
  12. KS L 5105 (2012), Testing method for compressive strength of hydraulic cement mortars, Korean Agency for Technology and Standard.
  13. KS L ISO 679 (2006), Methods of testing cements-Determination of strength, Korean Agency for Technology and Standard.
  14. Kwon, S. O., Bae, S. H., Lee, H. J., Kim, S. W., and Park, J. J. (2015), Influence of Measurements Lathe Scrap on the Characteristics of Fiber Reinforced Cementitious Composites. Journal of the Korean Society for Advanced Composite Structures, 6(2), 70-76. https://doi.org/10.11004/kosacs.2015.6.2.070
  15. Mangat, P. S., and Gurusamy, K. (1987), Long-term properties of steel fiber reinforced marine concrete. Materials and Structures, 20, 273-782. https://doi.org/10.1007/BF02485924
  16. Murali, G., Vivek Vardhan, C. M., Prabu, R., Mohammed Sadaquath Ali Khan, Z., Aarif Mohamed, T., and Suresh, T. (2010), Experimental investigation on fibre reinforced concrete using waste materials. International Journal of Engineering Research and Applications, 2(2), 278-283.
  17. Park, B. K., You, J. Y., Lee, J. A., Jin, C. R., Han, M. C., and Han, C. G. (2008), Basic Characteristics of High Performance Concrete Mixing Organic Fiber. The Korean Institute of Building Construction, 8(1), 87-91. https://doi.org/10.5345/JKIC.2008.8.4.087
  18. Park, C. J., Koh, K. T., Ahn, G. H., and Han, M. C. (2015), Effect of Silica Fume Type on the Mechanical Properties of Ultra-High Performance Concrete. Journal of Korean Recycled Construction Resource Institute, 3(3), 220-227. https://doi.org/10.14190/JRCR.2015.3.3.220
  19. Sim, J. S., and Lee, C. D. (1996), Mechanical Properties and Research Trends in Structural Application of Steel Fiber Reinforced Concrete. Magazine of the Korea Concrete Institute, 8(4), 28-38.
  20. Vijayakumar, G., Senthilnathan, P., Pandurangan, K., and Ramakrishna, G. (2012), Impact and energy absorption characteristics of lathe scrap reinforced concrete. International Journal of Structural and Civil Engineering Research, 1(1), 1-6.
  21. Yang, K. H. (2010), Slump and Mechanical Properties of Hybrid Steel-PVA Fiber Reinforced Concrete. Journal of the Korea Concrete Institute, 22(5), 651-658. https://doi.org/10.4334/JKCI.2010.22.5.651