• Journal of Plant Biotechnology
• /
• v.43 no.3
• /
• pp.272-280
• /
• 2016

Chrysanthemum is one of the top floriculture species with ornamental and medicinal value. Although chrysanthemum breeding program has contributed to the development of various cultivars so far, it needs to be advanced from the traditional phenotype-based selection to marker-assisted selection (molecular breeding) as shown in major cereal and vegetable crops. Molecular breeding relies on trait-linked molecular markers identified from genetic, molecular, and genomic studies. However, these studies in chrysanthemum are significantly hampered by the reproductive, genetic, and genomic properties of chrysanthemum such as self-incompatibility, inbreeding depression, allohexaploid, heterozygosity, and gigantic genome size. Nevertheless, several genetic studies have constructed genetic linkage maps and identified molecular markers linked to important traits of flower, leaf, and plant architecture. With progress in sequencing technology, chrysanthemum transcriptome has been sequenced to construct reference gene set and identify genes responsible for developments or induced by biotic or abiotic stresses. Recently, a genome sequencing project has been launched on a diploid wild Chrysanthemum species. The massive sequencing information would serve as fundamental resources for molecular breeding of chrysanthemum. In this review, we summarized the current status of molecular genetics and genomics in chrysanthemum and briefly discussed future prospects.

• Journal of Life Science
• /
• v.25 no.11
• /
• pp.1204-1213
• /
• 2015

A comprehensive analysis of the population structure of the sandfish (Arctoscopus japonicas), the most abundant fishery resource in the East Sea of Korea, has not been carried out, despite its importance in Korea. The present study examined the genetic diversity and differences between five populations (two Japanese and three Korean populations) of A. japonicas captured in the East Sea using both the 401 bp sequence of mitochondrial DNA (mtDNA, cytochrome b) and five microsatellite DNA (msDNA) markers. The results of the analysis using the Cyt b sequence revealed 27 haplotypes. Based on msDNA variations, the estimated expected heterozygosity (H_E) in each population ranged from 0.68 (Gampo, Korea) to 0.7765 (Erimo, Japan). Pairwise F_ST and AMOVA tests using both the Cyt b sequence and msDNA data pointed to significant differences between the Korean and Japanese populations (mtDNA; F_ST=0.2648, p<0.05, msDNA; F_ST=0.0814, p<0.05). These results were similar to the results of UPGMA, PCA, and structure analysis. In these analyses, the five populations were assigned to two groups (Korean populations and Japanese populations). These results shed light on the genetic diversity and relationships of A. japonicas and contribute to research on the evaluation, conservation, and utilization of Korean A. japonicas as genetic resources.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.216.1-216.1
• /
• 2013

PZT 박막은 강유전 특성과 압전소자 특성을 나타내는 물질로 DRAM (dynamic random acess memory)과 FRAM (ferroelectric RAM) 등의 기억소자용 capacitor와 MEMS (micro electro mechanical system) 소자의 압전 물질로 사용하기 위한 연구가 진행중에 있다. 하지만 이러한 연구에서는 PZT 박막의 전기적 특성 향상을 주목적으로 연구가 진행되어 왔다. 특히, 박막 공정중 발생하는 plasma에 의한 PZT의 전기적 특성 변화가 박막 표면의 물리적 변화에 기인할 것으로 추정하고 있지만 이에 대한 구체적인 연구는 미비하다. 이 연구에서는 plasma에 의한 PZT 박막 표면의 물리적 특성 변화를 연구하기 위하여 PZT 박막을 sol-gel을 이용하여 Si 기판위에 약 100 nm의 두께로 증착하였으며, 이후 최대 300 W의 Ar plasma로 plasma power을 증가시켜 각각 10분간 plasma처리를 실시하였다. PZT 박막 표면의 nano-mechanics 특성을 분석하기 위하여 Nano-indenter와 Kelvin Probe Force Microscopy (KPFM)을 사용하여 surface hardness, surface morphology를 확인하였고 특히, surface potential 분석을 통하여 PZT 박막 표면의 plasma에 의한 박막 극 표면의 전기적 특성 변화를 연구하였다. 이 연구로 plasma에 의한 PZT 박막은 표면으로부터 최대 43 nm 깊이에서의 hardness는 최대 5.1 GPa에서 최소 4.3 GPa의 분포로 plasma power 변화에 의한 특성은 측정 불가능하였다. 이는 plasma에 의한 영향이 시료 극 표면에 국한되어 나타나기 때문으로 추정되며 이를 보완하기 위하여 surface potential을 분석하였다. 결과에 의하면 plasma power가 0 W에서 300 W로 증가함에 따라 potential이 30 mV에서 -20 mV로 감소하였으나 potential의 분산은 100 W에서 최대인 17 mV로 측정되었으며, 이때 RMS roughness역시 가장 높은 20.145 nm로 측정되었다. 특히, 100 W에서 potential에서는 물결 모양과 같은 일정한 패턴의 potential 무늬가 확인되었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.668-671
• /
• 2001

The Sr$\_$0.8/Si$\_$2.4/Ta$_2$O$\_$9/(SBT) thin films are deposited on Pt-coated electrode(Pt/TiO$_2$/SiO$_2$/Si) using RF magnetron sputtering method. With increasing post-annealing temperature from 600[$^{\circ}C$] to 850[$^{\circ}C$], Bi-layered perovskite phase was crystallized above 650[$^{\circ}C$]. The maximum remanent polarization and the coercive electric field is 11.60[${\mu}$C/$\textrm{cm}^2$], 48[kV/cm] respectively. The leakage current density of SBT capacitor at post-annealing temperature of 750[$^{\circ}C$] is 1.01${\times}$10$\^$-8/ A/$\textrm{cm}^2$ at 100[kV/cm]. The fatigue characteristics of SBT thin films did not change up to 10$\^$10/ switching cycles.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.6
• /
• pp.252-258
• /
• 2001

($Ba_{0.7}Sr_{0.3})TiO_3$thin films were perpared on ITO-coated glass substrate by spin-coating method. The sol was sonicated in an ultrasonic bath to promote homogenization and the results were compared with untreated case. By application of the sonication process, crystallization temperatures of films were reduced, microstructers of films were more uniform and denser and the surface roughness of the films was lower from 8.4nm to 5.6nm. In addition, optical transmittances and electrical properties of films prepraed from sonicated sol were superior to those of films from untreated.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3A
• /
• pp.238-244
• /
• 1999

Pt/SBT/Pt capacitors were fabricated using the MOD-derived $SrBi_{2x}Ta_2O_9$ (SBT) films and their ferroelectic and leakage current characteristics were investigated with post annealing at 400~$800^{\circ}C$. Although the MOD-derived SBT film exhibited the hysteresis loop typical for the leaky film, the well-saturated ferroelectric hysteresis loop could be obtained by post annealing the Pt/SBT/Pt capacitors at $550^{\circ}C$~$800^{\circ}C$. The remanent polarization $2P_r$ of the SBT film exhibited a maximum value of 9.72$\mu\textrm{cm}^2$ with post annealing at $600^{\circ}C$, and then decreased with increasing the post annealing temperature above $600^{\circ}C$. The MOD-derived SBT films exhibited the high leakage current density of ~$10^{-3} \textrm{A/cm}^2$ at 75kV/cm. With post annealing the Pt/SBT/Pt capacitor at 600~$800^{\circ}C$, however, the leakage current density decreased remarkably to less than $10^{-6}\textrm{A/cm}^2$ at 75kV/cm.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.7
• /
• pp.473-478
• /
• 2001

Ferroelectric P $b_{0.99}$［(Z $r_{0}$ 6S $n_{0.4}$)/0.9/ $Ti_{0.1}$］0.98/N $b_{0.02}$ $O_3$(PNZST) thin films were deposited by a RF magnetron sputtering on L $a_{0.5}$S $r_{0.5}$Co $O_3$(LSCO)/Pt/Ti/ $SiO_2$/Si substrate using a PNZST target with excess PbO of 10 mole%. The crystallinity and electrical properties of the thin films annealed at various temperature and time were investigated. The thin films deposited at the substrate temperature of 500 $^{\circ}C$ and the power of 80 W were crystallized to a perovskite phase after rapid thermal annealing(RTA). The thin films annealed at 650 $^{\circ}C$ for 10 seconds in air exhibited the good crystal structures. The remanent polarization and coercive field of the PNZST capacitor were about 20 $\mu$C/$\textrm{cm}^2$ and 50 kV/cm, respectively. The reduction of the polarization after 2.2$\times$10$^{9}$ switching cycles was less than 10 %..10 %......

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.954-960
• /
• 2003

To develop mobile phone antenna modules, glass-ceramics composites that are 20∼80 dielectric constant materials which has been fabricated. The glass-ceramics composites were based in the BNT (BaO-Nd$_2$O$_3$-TiO$_2$), and properties-a sintering and dielectric property-were investigated in its composites according to the $K_2$O-CaO-P$_2$O$_{5}$ system glass frits. The prepared ceramics were sintered at 900∼120$0^{\circ}C$ with the glass frit contents ranging from 10 to 40 wt%. The shrinkage and relative density grew into increasing glass frits and sintering temperature. Sintered composites showed the tendency that the dielectric constant ($\varepsilon$$_{r}$) and quality factor (Q${\times}$f) decreased in increasing glass frits and sintering temperature.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.10
• /
• pp.805-815
• /
• 2015

The present study numerically investigated two-dimensional dielectrophoretic motions of a pair of particles suspended freely in a viscous fluid, interacting with a nearby nonconducting planar wall, under an external uniform electric field. The results show that the motions depend strongly on the set of two electric conductivity signs and the particles-wall separation gap. When both particles have the same sign, they revolve and finally align parallel to the electric field. In contrast, with different signs, they revolve in the opposite direction and finally align perpendicular to the field. Simultaneously, they are repelled to move farther away from the wall regardless of their conductivity set. With further separation from the wall, the particles-wall interaction effect diminishes and tthe particle-particle effect dominates.

• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.4
• /
• pp.310-316
• /
• 2020

Microarray technology represents a critical new advance in molecular cytogenetics. The development of this approach has provided fundamental insights into the molecular pathogenesis in clinical cytogenetics and has provided a clue to many unidentified or unexplained diseases. The approach allows a comprehensive investigation of thousands and millions of genomic loci simultaneously and enables the efficient detection of copy number alterations. The application of this technology has shown tremendous fluidity and complexity of the human genome, and has provided accurate diagnosis and appropriate clinical management in a timely and efficient manner for identifying genomic alterations. The clinical impact of the genomic alterations identified by microarrays is evolving into a diagnostic tool to identify high-risk patients better and predict patient outcomes from their genomic profiles. The transformation of conventional cytogenetics into an automated discipline will improve diagnostic yield significantly, leading to accurate diagnosis and genetic counseling. This article reviews cytogenetic technologies used to identify human chromosome alterations and highlights the potential utility of present and future genome microarray technology in the diagnosis.