• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.445-454
• /
• 1991

In this thesis, Mindlin plate element with nine nodes and three degrees-of-freedom at each node is formulated and is employed in eigen-analysis of a rectangular plates in order to alleviate locking phenomenon of eigenvalues. Eigenvalues and their modes may be locked if conventional $C_{0}$-isoparametric element is used. In order to reduce stiffness locking phenomenon, two methods (1, the general reduced and selective integration, 2, the new element that use of modified shape function) are studied. Additionally in order to reduce the error due to mass matrix, two mass matrixes (1, Gauss-Legendre mass matrix, 2, Gauss-Lobatto mass matrix) are considered. The results of eigen-analysis for two models (the square plate with all edges simply-supported and all edges built-in), computed by two methods for stiffness matrix and by two mass matrixes are compared with theoretical solutions and conventional numerical solutions. These comparisons show that the performance of the two methods with Gauss-Lobatto mass matrix is better than that of the conventional plate element. But, by considering the spurious rigid body motions, the element which employs modified shape function with full integration and Gauss-Lobatto mass matrix can elevate the accuracy and convergence of numerical solutions.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.207-216
• /
• 2003

To evaluate the smear zone caused by the drain installation, 10 piezometers were installed in the typical soft ground in the western coastal area of Korea. The dynamic pore water pressure developed during the drain installation was monitored using piezometers installed at a distance of 10cm, 20cm, 30cm, 40cm and 50cm from the location of the drain. The decay of pore pressure with time after pushing piezometers to depths of 5 meters and 7 meters during the drain installation was monitored to assess flow and consolidation characteristics of the soil after disturbance of the soil due to the drain installation. The drain installation results in shear strain and displacement of the soil and it decreases the permeability of the soil. Hence, the comparison between dissipation of the pore water pressure process in 10 pieszometers before as well as after installation of the drain indicated the diameter of disturbance zone and smear zone, which is related to the cross-sectional dimension of the mandrel. In addition, Cone-pressuremeter(CPM) tests were performed to obtain rigidity index of the soil for an interpretation of the dissipation processes. It has been evaluated by in-situ tests that the smear zone is from 3.0 to 3.6 times of the cross-sectional dimension of the mandrel. The hydraulic conductivity expressed in terms of the coefficient of consolidation after the drain installation was calculated from 3 to 8 times decrease evaluated by Teh & Houlsby equation and CPM test results.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2287-2297
• /
• 1992

The Formulation of a new Hermite straight beam element to eliminate the shear locking is presented. All the kinematic variables in Timoshenko beam are reinterpreted by the consideration of equilibrium equations together. It shows that when the modified transverse displacement field is used the Timoshenko beam looks apparently the same as the Euler beam. The element is formulated for the modified transverse displacement field to have the same interpolation scheme as that in the Hermite element. Transformation Matrix which relates a modified nodal vector with nonmodified one is also introduced to deal with general boundary conditions. Several examples are demonstrated and discussed for the purpose of verification of the concepts employed. The solutions obtained reveal that the element describes of the beam quite correctly, showing no locking and that it is also applicable to the analysis of both thin and thick beams.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.2
• /
• pp.15-26
• /
• 2004

Based on an estimating method for post-cyclic strength and stiffness with cyclic triaxial tests proposed by one of the authors, cyclic Direct Simple Shear (DSS) tests were carried out to confirm whether the method can be adapted to DSS test on fine-grained soils: silty clay, plastic silt, and non-plastic silt. Results from cyclic and post-cyclic DSS tests were interpreted by a modified method as adopted for cyclic and post-cyclic triaxial tests. In particular, influence of plasticity index for fine-grained soils and initial static shear stress (ISSS) was emphasised. Findings obtained from the present study are: (i) liquefaction strength ratio of fine-grained soils decreases with decreasing plasticity index and increasing ISSS; (ii) plasticity index and ISSS did not markedly influence relation between equivalent cyclic stiffness and shear strain relations; (iii) the higher the plasticity index of fine-grained soils is, the less the strength ratio decreases with increment of a normalcies excess pore water pressure (NEPWP); (iv) stiffness ratio of plastic silt has large activity decrease rapidly with increasing excess pore water pressure; and (v) post-cyclic strength and stiffness results from DSS tests agree well with those predicted by the method modified from a procedure used for triaxial test results.

• Journal of the KSME
• /
• v.31 no.4
• /
• pp.364-379
• /
• 1991

현재 불황산업으로 알려진 기초소재 산업의 대책으로서, 과잉설비의 처리, 원재료 및 에너지 코 스트의 절감, 설비투자의 활성화, 사업의 집약화 등과 병행하여 생산 공정 자체의 혁신, 제품의 고부가가치화 및 신제품의 개발측면에서 강력한 기술개발의 추진이 요구되고 있다. 소재산업 제품의 부가가치, 신제품의 개발 방법으로서 ACM이 이용되고 있다. 또한, 자원에너지 제약을 극복하기 위해서는 에너지를 대체할 수 있는 재료의 개발과, 자원 및 에너지를 절약하는 방법 두 가지가 있다. 구체적 대책의 하나로서, 신규소재를 이용하여 경량강성화된 ACM의 출현이 강하게 요구되고 있다.

• LOGISTICS
• /
• s.10
• /
• pp.25-27
• /
• 2005

글로벌 경쟁체제의 도래와 정보화의 급진전 및 소비자의 권익신장 등 경제환경의 변화에 따라 고객서비스와 직결되는 물류의 중요성이 날로 강조되고 있다. 기업의 경쟁력 제고를 위한 물류의 아웃소싱 증가와 제3자물류산업의 활성화 및 공급사슬관리(SCM)의 보편화와 일관물류서비스에 대한 수요증가에 따라 물류센터의 기능 또한 종래의 보관 중심이 아닌 일관물류의 중심적 기능으로 발전하고 있으며, 일관물류서비스의 품질을 좌우하는 결정적 요소로 중시되고 있다. 이렇듯 물류센터의 기능이 중시되고 있음에도 현재 우리나라 물류센터들은 공급과잉과 정보부족 및 공급자의 영세성, 제도적 지원부족 등의 주요한 문제점들을 안고 있는 것으로 지적되고 있다. 이런 차에 지난 3월 31일 결성된 한국물류협회 물류센터분과위원횡 거는 관련 업계의 기대가 적지 않다. 이에 물류센터분과위원장으로 선임된 이강성 TL Korea 사장으로부터 우리나라 물류센터의 실태와 분과위원회의 지향점 등을 들어본다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.11
• /
• pp.2871-2882
• /
• 1994

Two kinds of 4-node plane stress/strain finite elements are presented in this work. They are derived from the modified Hellinger-Reissner variational principle so as to employ the internal incompatible displacement and independent stress fields, or the incompatible displacement and strain fields. The introduced incompatible functions are selected to satisfy the constant strain condition. The elements are evaluated on several problems of bending and material incompressibility with regular and distorted elements. The results show that the new elements perform excellently in the calculation of deformation and stresses.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.3
• /
• pp.419-429
• /
• 1992

본 연구에서는 면외 변형이 가능한 평면 곡선보에 수정 형상함수를 적용하여 탈락성 및 지속성 에너지에 포함된 가성구속에 의한 수치해의 거동을 고찰함과 동시에, 가성구속에 의한 오차 발생 요인이 제거된, 면외 변형이 가능한 평면 곡선보의 선형 요소를 제안하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.8
• /
• pp.2540-2545
• /
• 1996

It is well known that in typical displacement-based curved beam elements, the stiffness matrix is overestimated and as a result displacement predictions show gross error for the thin beam case. In this paper, a stain based curved beam element with 2 nodes is formulated based on shallow beam geometry. At the element level, the curvature and membrane strain fields are approximated independently and the displacement fields are obtained by integrating the strain fields. Three test problems are given to demonstrate the numerical performance of the element. Analysis results obtained reveal that the element is free for locking and very effectively applicable to deeply as well as shallowly curved beams.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.10
• /
• pp.2640-2652
• /
• 1994

The stiffness of 6-node isotropic element is stiffer than that of 8-node isotropic element of same configuration. This phenomenon was called 'Relative Stiffness Stiffening Phenomenon'. In this paper, an equation of sampling point modification which correct this phenomenon was derived for the composite plate, as well as an equation for an isotropic plate. The relative stiffness stiffening phenomena of an isotropic plate element could be corrected by modifying Gauss sampling points in the numerical integration of stiffness matrix. This technique could also be successfully applied to the static analyses of composite plate modeled by the 3-dimensional 16-node elements. We predicted theoretical errors of stiffness versus the number of layers that result from the reduction of numerical integration order. These errors coincide very well with the actual errors of stiffness. Therefore, we can choose full integration of reduced integration based upon the permissible error criterion and the number of layers by using the thoretically predicted error.