• Title/Summary/Keyword: 강도감소지수

Search Result 268, Processing Time 0.023 seconds

Determination of the Strength and Stiffness Degradation Factor for Circular R/C Bridge Piers (원형 철근콘크리트 교각의 강성 및 강도감소지수 결정)

  • 이대형;정영수
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.4 no.2
    • /
    • pp.73-82
    • /
    • 2000
  • 본연구의 목적은 반복하중을 받는 철근콘크리트 교량 교각의 비선형 이력거동을 해석적으로 예측하는 것이다 이를 위해서 반복적인 횡하중이 작용하는 경우에 실험결과와 일치하는 교각의 하중-변위 이력곡선을 도출하고자 수정된 trilinar 이력거동모델을 이용하였다 철근과 콘크리트의 비선형 거동특성과 각 하중단계에 따른 교각의 중립축을 구하여 소성힌지부의 모멘트와 변형률을 구하고 반복하중하에서의 강성의 변화를 해석적으로 모형화하기 위하여 각기 다른 강성을 갖는 5가지 지선을 갖춘 형태의 이력거동모델식을 제안하였다 본 연구에서는 실험적으로 구한 하중-변위 이력곡선을 이용하여 축하중비 주철근비 및 구속철근비에 따른 강도감소지수와 강성감소지수의 영향을 회귀분석을 이용하여 일반식으로 제안하였다 새로운 이력거동 해석 모델을 프로그램 SARCF III에 적용함으로써 기존 철근콘크리트 교각에 강도 및 강성감소 현상을 정확하게 예측하였다

  • PDF

Flexural Behavior of RC Beams Using High-Strength Reinforcement for Ductility Assessment (고강도 철근을 활용한 휨 부재의 연성거동에 관한 연구)

  • Kwon, Soon-Beom;Yoon, Young-Soo
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.2 no.1 s.4
    • /
    • pp.119-126
    • /
    • 2002
  • This paper presents the appropriateness for using high strength reinforcement according to the use of high strength concrete. Nine flexural tests were conducted on full-scale beam specimens according to the concrete strength, reinforcement strength and reinforcement ratio as main variable. The structural behavior was analyzed due to the flexural strength, stress-strain curve, deflections at yielding and fracture point, crack appearance and ductility factor. The member with high-strength reinforcements showed large deflection at yielding point and this was analyzed as a main cause to decrease the ductility factor. Structural behavior after yielding point, however, showed similarity to behavior of members with normal strength reinforcements of same stiffness. It was found that in the case of using reinforcements of $5500kgf/cm^2$ strength, the combination with concrete of $800kgf/cm^2$ strength demonstrated the great appropriateness which can increase the flexural capacity without any reduction of maximum reinforcement ratio.

Analysis of Concrete Flexural Strength and Surface Smoothness for Concrete Pavement Performance Based Payment Regulations (콘크리트 포장의 공용성 기반 지불규정 적용을 위한 콘크리트 휨강도 및 표면 평탄성에 관한 분석)

  • Hwang, Seong-Jae;Kim, Seong-Min;Rhee, Suk-Keun
    • International Journal of Highway Engineering
    • /
    • v.11 no.4
    • /
    • pp.95-105
    • /
    • 2009
  • This study was conducted to investigate the effects of concrete flexural strength and surface smoothness, which were pay factors of concrete pavements, on pavement performance, and to develop the methodologies to determine the proper allowable ranges according to the magnitudes of those pay factors. The concrete flexural strength was analyzed using the AASHTO, power, and linear fatigue failure models, and the surface smoothness was analyzed for the roughness indices of PSI, IRI, and PrI using the AASHTO model. The analysis results showed that the allowable range of the flexural strength should be determined using the rate between the deficiency and strength, and the penalty should be linearly proportional to the strength deficiency rate because the linear relationship between the strength deficiency rate and the reduction in pavement life was observed. As the initial surface smoothness became better, the smoothness deficiency rate should be larger. The penalty due to the surface smoothness deficiency should also be linearly proportional to the smoothness deficiency rate.

  • PDF

Analysis on Changes of Daily Temperature and Daily Precipitation in Climate Indices over Republic of Korea (기후지수를 이용한 우리나라 일기온 및 일강수의 변화 분석)

  • Lee, Hyo-Shin;Shin, Jin-Ho;Kwon, Won-Tae
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2010.05a
    • /
    • pp.1575-1579
    • /
    • 2010
  • 본 연구에서는 우리나라 6개 지점(강릉, 서울, 인천, 대구, 부산, 목포)에서 관측한 약 100년간(1912-2009년, 단 1950-1953년 제외)의 일최고/최저기온 및 일강수 자료를 이용하여 각 지점별로 다양한 기후지수를 산출하고 이들의 변화를 살펴보았다. 기온 관련 기후지수로는 여름일수, 영하일수, 결빙일수, 서리일수, 열대야일수, 냉방도일, 난방도일, 일교차, 식물성장일수, 일최고/최저기온의 월최고값 및 월최저값 등을 분석하였으며, 강수 관련 기후지수로 강수량, 강수일수, 강수강도, 호우일수, 미우일수, 최고 일강수 및 5일 연속 최고 강수량, 연속건조일수 및 연속습윤일수, 극한 강수일의 강수량 등을 계산하였다. 다음은 6개 지점의 기후지수를 평균한 결과이다. 6개 지점 모두에서 최저기온의 상승률이 최고기온의 상승률보다 크게 나타남에 따라 분석기간 동안 일교차는 점차 줄어드는 경향($-0.12^{\circ}C$/10년)을 보였고, 최저기온에 근거한 기후지수인 서리일수 (최저기온이 $-5^{\circ}C$ 미만, -2.6일/10년), 영하일수(최고기온이 $0^{\circ}C$ 미만, -1.0일/10년) 등의 감소와 평균기온의 상승에 따른 성장계절길이(growing season length)의 증가(+3.53일/10년)가 뚜렷하게 나타났다. 일강수와 관련된 주요변화로 미우일수(일강수량이 1 $mmday^{-1}$ 이하)는 감소(-0.75일/10년)했지만, 10 $mmday^{-1}$ (+0.32일/10년), 20 $mmday^{-1}$ (+0.27일/10년), 30 $mmday^{-1}$ (+0.25일/10년), 50 $mmday^{-1}$ (+0.17일/10년), 80 $mmday^{-1}$(+0.09일/10년) 이상 내린 강수일수는 증가하였다. 강수강도(강수량이 1 $mmday^{-1}$ 이상일 때의 강수량과 강수일수 기준)는 0.23 $mmday^{-1}$/10년로 증가했다.

  • PDF

무기 및 유기 응집제를 이용한 수중 휴믹산의 플럭특성

  • Heo, Mi-Ran;Lee, Min-Gyu;Gam, Sang-Gyu
    • Proceedings of the Korean Environmental Sciences Society Conference
    • /
    • 2005.11a
    • /
    • pp.137-140
    • /
    • 2005
  • Alum과 PDDA에 대하여 각각 휴믹산의 플럭 형성-파괴-재형성을 관찰 한 결과 sweep flocculation에 의해 휴믹 플럭을 형성하는 alum은 플럭의 파괴 및 재형성은 비가역적이이나 유기응집제인 PDDA 플럭의 파괴는 가역적이라는 것을 알 수 있었다. 그리고 플럭 강도지수 측정으로부터 PDDA는 alum보다 높은 강도를 가지는 것을 알 수 있었다. 그리고 플럭강도에 미치는 이온강도의 영향을 살펴 보면 alum은 플록강도에 미치는 영향이 거의 없었지만 유기응집제인 PDDA는 플럭 강도가 크게 감소함을 알 수 있었다.

  • PDF

원자력용 316L 스테인레스 강의 고온기계적 성질에 미치는 질소의 영향

  • 김대환;류우석;남호윤;김영철;홍준화
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1995.05a
    • /
    • pp.729-734
    • /
    • 1995
  • 원자력용 316L강에 질소를 첨가한 경우의 고온 인장성질을 조사하였다. 온도가 증가하면 인장강도는 감소하다가 온도범위가 30$0^{\circ}C$~50$0^{\circ}C$에서는 일정한 값을 나타낸 후 급격한 감소를 나타내었고 연신율은 감소하다가 40$0^{\circ}C$에서 최소값을 나타낸 후 다시 증가하는 경향을 나타내었다. 질소를 첨가하면 인장강도증가와 함께 연신율도 증가하였다. 동적변형시효 온도구간에서 변형속도변화에 따른 인장강도 및 연신율의 변화는 매우 작다. 동적변형시효를 위한 활성화에너지를 구해본 결과 동적변형시효를 일으키는 원소는 Cr이다. 질소를 첨가하면 동적변형시효가 발생되는 온도가 고온 쪽으로 이동되었는데 이것은 질소가 Cr과의 상호작용에 의해 Cr의 확산속도를 낮추기 때문이다. 가공경화지수는 동적변형시효와 회복의 영향으로 40$0^{\circ}C$에서 최대값을 나타내었으며 이 온도는 연신율이 최소값을 나타내는 온도와 인장강도가 일정하게되는 온도와 일치하므로 강도강화기구는 동적변형시효로 판명되었다.

  • PDF

The Point Load Index of the Daegu Shale and its Relation to the Uniaxial Compressive Strength (대구지역 셰일의 점재하지수 특성 및 일축압축강도와의 상관성)

  • Lee, Younghuy;Youn, Chanho
    • Journal of the Korean GEO-environmental Society
    • /
    • v.10 no.3
    • /
    • pp.37-45
    • /
    • 2009
  • The experimental study was carried out to evaluate the characteristics of the point load index and the uniaxial compressive strength of inherently anisotropic shale in the laboratory. In the testing program the effects of size and the shape on the point load index were investigated both in the axial and diametral direction. In general, the point load index of the shale was constant when the length/diameter (L/D) ratio of the specimen is greater than 1.0 in the diametral direction. The point load index in axial direction shows slight decrease as the L/D ratio is increased and the corner breakage was observed when L/D ratio is greater than unity. The minimum point load index was observed in the bedding angle of $\beta=15^{\circ}{\sim}30^{\circ}$ in the axial point load tests and of $\beta=30^{\circ}$ in the uniaxial compression tests. The relationship between the point load index and the uniaxial compressive strength was linear to ${\sigma}_c=25.0 I_{s(50)}$ for the specimen with the bedding plane angle, $\beta$ at the range of $0^{\circ}{\sim}90^{\circ}$. On the other hand, this relationship was appeared linear to ${\sigma}_c=14.4 I_{s(50)}$ when the bedding angle, $\beta$ is fixed to 90${^{\circ}}$ and this correlation is much different from ${\sigma}c=22 I_{s(50)}, which is generally applied to the rock specimen with no bedding plane in ISRM (1985). The anisotropic strength with different $\beta$ angle shows the shoulder type and this can be suitably modelled by the corrected Ramamurthy'(1993)s equation with the index value of 'n' equal to 3.0.

  • PDF

Factors Influencing Characteristics of Sand Core for Water Jacket in Automotive Cylinder Blocks Casting (자동차 실린더 블록 주조에서 워터 자켓용 샌드 코어 특성에 영향을 미치는 인자)

  • Kim, Ki-Jun
    • Journal of the Korea Convergence Society
    • /
    • v.12 no.2
    • /
    • pp.185-191
    • /
    • 2021
  • The characteristics of the foundry sand were analyzed for water jacket core required to prevent structural deformation from the heat generated in the cylinder bore during the casting of the cylinder block of an automobile. The sand core tensile strength tester, AFS-GFN, and optical microscope were used to evaluate the its properties. If the SiO2 content is high in the foundry sand, the dimensional defects and veining defects occur due to high temperature expansion. Also, if it is too low, the core breakage, porosities, chemical burn-on defects occur. The particle size index and grain shape influenced the core strength and resin consumption, resulting in fluctuations in defect types. The higher the alkalinity of the dried sand, the lower the core strength. And the more basic, the lower the core strength. At the resin content of 1.6~1.8%, the increase in core strength after 1 hour curing was approximately at its maximum.

Future Drought Forecasting Using RCP 8.5 Scenarios in the Korean Peninsula (RCP8.5시나리오를 이용한 남한지역의 장래 가뭄 예측)

  • Jang, Dong Woo;Park, Hyo Seon;Choi, Jin Tak
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.207-207
    • /
    • 2016
  • 최근 2년 간 한반도에 내린 강수량은 평년에 비해 60%정도 밖에 내리지 않았다. 이로 인해 2015년에는 전국 곳곳에서 가뭄이 발생하였고, 농작물피해, 이수부분에서 어려움을 겪었다. 지역적으로 가뭄피해를 해소하고자 여러 대책이 강구되고 있고, 국가적으로 가뭄을 극복하기 위해 국가가뭄정보분석센터의 개소 등 기상, 수문정보를 바탕으로 한 가뭄 해소 노력이 증대되고 있다. 기상청에서는 기상확률예보를 통해 단기적인 강수, 가뭄 예측자료를 제공하고 있으며, 전지구모델을 상세화 한 지역기후모델을 통해 한반도 전 지역에 대해 기후변화시나리오에 의한 강수, 기온자료를 제공하고 있다. 가뭄을 예측하고, 가뭄정도를 파악하기 위해서 가뭄지수를 보편적으로 이용하고 있다. 강수와 기온은 기상학적 가뭄지수 산정에 가장 중요한 인자로 이용되고 있다. SPI는 강수자료를 이용하여 가뭄정도를 파악할 수 있는 지수이고, RDI는 강수와 기온자료를 통해 잠재 증발산량을 산정하고, 이를 고려하는 가뭄지수이다. 한반도 내 주요 관측소지점에 대해 RCP 8.5 시나리오에 의한 장래 2100년까지 가뭄지수를 산정한 결과 RDI의 경우 가뭄발생빈도와 강도가 점차 증가하는 것으로 나타났다. 장래 한반도의 연 강수량은 크게 감소하지 않는데 비해 기온은 점차 증가하는 경향이 발생함에 따라 기온상승에 의한 증발산량의 증가가 극한가뭄이 발생하는 주요요인으로 판단되었다. 수도권지역의 경우 예측기간이 2100년에 가까울수록 SPI에 의한 가뭄지수는 점차 증가하여 가뭄 강도가 약해지는 것으로 예측되었고, RDI지수에 의한 가뭄지수는 점차 감소하여 극한가뭄이 발생할 가능성이 증가하는 것으로 나타났다. 본 연구 결과를 통해 장래 가뭄에 의한 피해지역 예측, 수자원 계획, 이수분야에 활용될 수 있을 것으로 기대된다.

  • PDF

Changes of Unusual Temperature Events and their Controlling Factors in Korea (한국의 이상기온 출현 빈도의 변화와 그 요인에 관한 연구)

  • Heo In-Hye;Lee Seung-Ho
    • Journal of the Korean Geographical Society
    • /
    • v.41 no.1 s.112
    • /
    • pp.94-105
    • /
    • 2006
  • This paper aims to analyze changes of unusual temperature events on summer and winter and their controlling factors. There has been obviously an increased frequencies of summer unusual high temperature occurrence and decreased frequencies of winter unusual low temperature at most of stations. WMI, winter SHI and AOI might be essential for prediction of unusual temperature during winter and summer OHI and spring NPI for summer unusual low temperature. These factors are crucial because they reflect the recent global warming trend as well as have apparent associations with unusual temperature occurrence frequency in Korea.