• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.2
• /
• pp.31-39
• /
• 1990

Deck wetness phonomena has long been considered as one of the factors that degrade the performance of a ship in waves. In rough weather, the frequent shipping of water may give rise to the capsizing of the ship. Therefore an appropriate above water bow design is an improtant assert to a ship of which successful performance in rough weather is a prerequisite such as a warship. In this paper the experimental technique for estimation of deck wetness frequency is presented. The results of the model tests are compared with those of calculation using Ochi's formula. Finally the applicability of Ochi's formula is discussed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.181-186
• /
• 2005

A ship runs with various modes of motion due to waves. Among the modes, roll mainly influences on the safety of cargos on the deck of container ship. In order to protect cargo shifting and turning, securing and lashing system are generally installed. In that case, it is necessary that the force and moment at the connection point of containers should be estimated. Therefore we derived mathematical equations to calculate the forces of securing points and lashing wires. Also we calculated those forces and moments about various lashing patterns.

• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.377-382
• /
• 2005

A ship runs with various modes of motion due to waves. Among the modes, roll mainly influences on the safety of cargos on the deck of container ship. In order to protect cargo shifting and turning, securing and lashing system are generally installed. In that case, it is necessary that the force and moment at the connection point of containers should be estimated. Therefore we derived mathematical equations to calculate the forces of securing points and lashing wires. Also we calculated those forces and moments about various lashing patterns.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.2
• /
• pp.100-108
• /
• 2000

As U.S. congress and I.M.O. have recently adopted strengthened MARPOL73/78 regulations on marine pollution, it is necessary to develope a new type of tankers such as Double hull tanker(D/H Tanker) and Mid-deck tanker(M/D Tanker) and so on. Because most of researches are concentrated on the volume of oil spill due to collision of ships, in this paper, a structural design program for D/H Tankers and M/D Tankers is developed to suggest the effective type of tankers by comparing structural characteristics between their types. By this program, minimum hull weight designs of D/H tankers and M/D tankers considering tank arrangement are performed and the design results are compared each other. The efficient types of hull structure for the minimum weight design between D/H tankers and M/D tankers is proposed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.1-9
• /
• 2021

A60 class deck penetration piece is a fire-resistance apparatus installed on the deck compartment to protect lives and prevent flame diffusion in fire accidents. In case that the A60 piece is newly developed or its initial design is revised, it is important to verify the fire resistance performance using a fire test procedure (FTP) code. In this paper, transient heat transfer analysis was carried out to evaluate the fire resistance design compatibility of the newly devised A60 piece. The analysis results were verified via a fire test. The heat transfer characteristics were also investigated by comparing design specifications, such as diameter, internal configuration, and material type. The analysis was performed using ABAQUS/Implicit, and the fire test was performed according to the FTP code. The fire resistance performance of the A60 pieces satisfied the safety of life at sea convention regulation. The material type was the most important design specification for the A60 piece. Based on the maximum test temperature, the measured temperature of SUS316L material was 25% lower than that of S45C on average. The differences between thermal conductivity and specific heat of each material were 17% and 58%, respectively.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.2
• /
• pp.63-77
• /
• 1990

The combined deckstructure-car system of a car carrier is especially sensitive to hull girder vibrations due to mechanical excitations and wave loads. For the free and forced vibration analysis of the system, the analytical methods based on the receptance method and two schemes for efficient applications of the methods are presented. The methods are especially relevant to dynamical reanalysis of the system subject to design modification or to dynamic optimization. The deck-car system is modelled as a combined system consisting of a stiffened plate representing deck, primary structure, and attached subsystems such as pillars, additional stiffeners and damped spring-mass systems representing cars/trucks. For response calculations of the system subjected to displacement excitations along the boundaries, the support displacement transfer ratio conceptually similar to the receptance is introduced. For the verification of accuracy and calculation efficiency of the proposed methods, numerical and experimental investigations are carried out.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.5
• /
• pp.273-281
• /
• 2013

In this paper, the effects of bow deck shape on the green water are studied by numerical and experimental method. Varying the deck shapes to triangular, elliptic and circular, the thickness and advancing velocity of green water leading edge are compared using numerical method. Also the motion, the pressure on the vertical wall and the height on the deck of green water are compared among the three bow deck shapes in the heave and pitch motion free condition by experimental method. To remove the effects of the difference of motions among the deck shapes, numerical simulations are performed varying the deck shape with the same motion. In the same motion condition, smallest impulsive pressure occurred in the condition of elliptic deck shape.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.168-170
• /
• 2011

본 논문에서는 항공 갑판의 비파괴 검사 영상에서, 조직의 이상이나 결함의 정도를 검출하는 기존의 방법보다 결함 검출의 정확도를 개선한 방법을 제안한다. 제안된 결함 검출 방법은 결함의 윤곽선을 추출하기 위하여 라플라시안 필터링 기법을 적용하여 윤곽선을 추출한다. 라플라시안 필터링 기법을 적용하여 윤곽선을 추출할 경우에는 결함 이외의 다른 객체들의 윤곽선도 검출된다. 따라서 본 논문에서는 이진화 기법과 팽창 연산을 적용하여 결함의 후보 객체들을 연결한다. 그리고 Grassfire 라벨링 기법을 적용하여 잡음을 제거하고 팽창 연산과 침식 연산을 이용하여 결함 후보 영역의 크기를 조정한다. 크기가 조정된 결함 후보 영역을 기반으로 원 영상에서 결함 후보 영역을 추출한다. 결함 후보 영역에서 결함 영역을 추출하기 위해 결함 후보 영역의 명암 대비를 증가시키고 결함 후보 영역의 주변 정보를 이용하여 이진화한다. 이진화 된 영역에서 Grassfire 라벨링 기법을 이용하여 잡음을 제거하고 최종적으로 결함 영역을 검출한다. 본 논문에서 제안한 방법으로 항공갑판의 결함을 추출한 결과, 기존의 방법보다 항공 갑판의 결함을 추출하는데 효과적인 것을 확인하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.6
• /
• pp.729-736
• /
• 2015

In this paper, It was performed to optimize for the deck's structural design of a double ended car ferry ship respect to Goal-Driven Optimization (GDO). It was examined for the strength and deformation of the deck and determined to save economic cost the optimal point. The deck thickness based on the Design of Experiments (DOE) and response surface method was increased to 110%. and can improve the deck's strength and stiffness. By performing the regression analysis respect to the result, we propose the optimal regression model formula as a third degree polynomial regression models. The coefficient of determination $R^2$ was about 0.98 and reliability could be obtained.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.3
• /
• pp.71-78
• /
• 1989

A series of total loss of log carriers of G/T 4000 class which are engaged in EAST-SOUTH ASIAN route have been reported during the last decade. The casualties has been investigated in depth to draw the efficient means of safety. The results of this investigation, which are described in this paper, have been submitted to INTERNATIONAL MARITIME ORGANIZATION(IMO) by KOREAN GOVERNMENT in cooperation with the KOREAN REGISTER OF SHIPPING to request the revision of stability criteria of ship carrying timber deck cargoes.