• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.51-52
• /
• 2018

화력발전용 순환유동층 보일러는 환경오염의 주요인인 질소산화물(NOx)과 황산화물(SOx)의 배출량이 적은 친환경 화력발전용 보일러로 화력발전 업계에서 각광받고 있는 추세이다. 그러나 순환유동층 보일러의 연료인 유동매체는 미분탄과 같이 작지만 단단한 고체이므로 유동매체의 타격으로 인해 워터월(waterwall) 튜브의 마모는 물론 누설까지 야기할 수 있다. 순환유동층 보일러 튜브에서 누설된 증기는 보일러 내부에 클링커(Clinker)를 발생시키고 이는 순환유동층 보일러 튜브 표면에 응고되어 열전도율을 감소시킬 뿐만 아니라 보일러 운전정지의 원인이 된다. 따라서 본 논문에서는 음향방출 센서를 이용하여 화력발전용 순환유동층 보일러 튜브의 누설 위치를 추정하는 방법을 제안한다. 제안 방법에서는 매질의 분자단위 이동에 의해 발생되는 탄성파를 감지할 수 있는 음향방출 센서를 이용하고, 보일러 워터월 튜브의 멤브레인 용접부와 비용접부(seamless)의 감쇠율을 고려한 위치별 센서 감도 추정 알고리즘을 통해 워터월 튜브의 위치별 진폭 크기를 히트맵으로 표현할 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1142-1148
• /
• 2006

Actually, a present traffic accident detection system is subsisting limitation of accurate distinction under the crowded condition at intersection because the system depend upon mainly the image information at intersection and digital image processing techniques nearly all. To complement this insufficiency, this article aims to estimate the level of present technology and a realistic possibility by analyzing the acoustic characteristic of crash sound that we have to investigate fur improvement of traffic accident detection rate at intersection. The skid sound of traffic accident was showed the special pattern at 1[KHz])$\sim$3[KHz] bandwidth when vehicles are almost never operated in and around intersection. Also, the frequency bandwidth of vehicle crash sound was showed sound pressure difference over 30[dB] higher than when there is no occurrence of traffic accident below 500[Hz].

• Korean Journal of Remote Sensing
• /
• v.24 no.2
• /
• pp.213-222
• /
• 2008

Although hyperspectral sensing data have shown great potential to derive various surface information that is not usually available from conventional multispectral image, the acquisition of proper hyperspectral image data are often limited. To use ground-based hyperspectral camera image for remote sensing studies, radiometric calibration should be prerequisite. The objective of this study is to develop radiometric calibration procedure to convert image digital number (DN) value to surface reflectance for the 120 bands ground-based hyperspectral camera. Hyperspectral image and spectral measurements were simultaneously obtained from the experimental target that includes 22 different surface materials of diverse spectral characteristics at wavelength range between 400 to 900 nm. Calibration coefficients to convert image DN value to at-sensor radiance were initially derived from the regression equations between the sample image and spectral measurements using ASD spectroradiometer. Assuming that there is no atmospheric effects when the image acquisition and spectral measurements were made at very close distance in ground, we were also able to derive calibration coefficients that directly transform DN value to surface reflectance. However, these coefficients for deriving reflectance values should not be applied when the camera is used for aerial image that contains significant effect from atmosphere and further atmospheric correction procedure is required in such case.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.11 no.4
• /
• pp.209-214
• /
• 1991

The germination of seeds is developmentally complex process requiring water uptake, which is regulated by both genotypic and environmental factors. The present study was undertaken to determine the difference in germination characteristics, and to compare the ability of the logistic and Weibull functions to describe the cumulative germination curve when two levels of osmotic potential(0, -5 bar) were put to seeds of alfalfa, tall fescue, orchardgrass, and Kentucky bluegrass. The effects of grass type, osmotic potential, and their interaction on the total germination and coefficient of germination velocity were significant(P<0.01). The Weibull equation for predicting percent cumulative germination curve of alfalfa had significantly lower residuals than the logistic equation regardless of osmotic potential(P<0.01), indicating that the Weibull equation was more efficient than the logistic equation to fit the data of the percent cumulative germination of alfalfa. The rate parameter from the logistic equation was decreased under water stress, whereas the scale and shape parameters were increased. There were significant differences in days to 20% germination estimated from the logistic and Weibull equations.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.7-15
• /
• 2010

Research of this paper focused on developing and demonstrating of algorithm with the figures of difference between historical traffic pattern data and real-time traffic data to decide on what the incident is. The aim of this dissertation is to develop incident detection algorithm which can be understood and modified easier to operate. To establish traffic pattern of this algorithm, weighted moving average method was applied. The basis of this method was traffic volume and speed of the same day and time at the same location based on 30-second raw data. The model was completed by a serious of steps of process-screening process of error data, decision of the traffic condition, comparison with pattern data, decision of incident circumstances, continuity test. A variety of parameter value was applied to select reasonable parameter. Results of application of the algorithm came out with figures of average detection rate 94.7 percent, 0.8 percent rate of misinformation and the average detection time 1.6 minutes. With these following results, the detection rate turned out to be superior compared with result of existing model. Applying the concept of traffic patterns was useful to gain excellent results of this study. Also, this study is significant in terms of making algorithm which theorized the decision process of actual operators.

• Composites Research
• /
• v.37 no.4
• /
• pp.343-349
• /
• 2024

The use of composite materials for structural fasteners is increasingly common, making it crucial to assess the deformation of these fasteners under fatigue behavior. In this study, clamp-type fasteners were manufactured using carbon fiber reinforced composites, and their structural stability and sectional damage rates were evaluated using electrical resistance measurement during fatigue behavior. While clamp-type composite fasteners exhibited minimal deformation in flat sections, significant deformation occurred in the bent sections due to fatigue. It was observed that insufficient angular stability led to concentrated damage in the bent sections. The dynamic fatigue behavior showed that the length change rate of the composite fasteners was within 0.6%, but the angular change rate reached up to 6%, indicating that the bent sections are the most critical areas. By utilizing the self-sensing capability of the composite fasteners, sectional damage behavior was assessed through electrical resistance measurement. Significant damage was noted in the bent sections due to fatigue, and 3D-CT results revealed substantial deformation and interfacial damage when the initial bend angle of the fasteners was less than 90 degrees. These findings highlight the importance of reinforcing the stiffness of the bent sections and establishing systematic angular standards in the development of composite fasteners.

• Journal of KIISE:Computing Practices and Letters
• /
• v.12 no.3
• /
• pp.149-159
• /
• 2006

To provide on-demand video streaming services through the network, video objects with both high and low client request rates should be served efficiently. In this paper, we propose a dynamic on-demand streaming approach for providing services efficiently regardless of the client request rate. This approach can maintain QoS by transitioning the service scheme according to the request rate. The server provides services by the Heuristic broadcasting approach when the client request rate is low and by Striping broadcast, one of many Periodic broadcast approaches, when the client request rate is high. The server knows the variations of client request rates by the number of service channels and decides the transition to more efficient service schemes on its own. We simulated this scheme transition with various client request intervals and traces from a company providing streaming services. The results show that the performance of our approach is reasonable.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.127-133
• /
• 2021

A recent study of people physically falling focused on analyzing the motions of the falls using a recurrent neural network (RNN) and a deep learning approach to get good results from detecting 2D human poses from a single color image. In this paper, we investigate a detection method for estimating the position of the head and shoulder keypoints and the acceleration of positional change using the skeletal keypoints information extracted using PoseNet from an image obtained with a low-cost 2D RGB camera, increasing the accuracy of judgments about the falls. In particular, we propose a fall detection method based on the characteristics of post-fall posture in the fall motion-analysis method. A public data set was used to extract human skeletal features, and as a result of an experiment to find a feature extraction method that can achieve high classification accuracy, the proposed method showed a 99.8% success rate in detecting falls more effectively than a conventional, primitive skeletal data-use method.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.07a
• /
• pp.357-358
• /
• 2013

본 논문에서는 커패시턴스를 이용해 수액 내에 있는 공기방울을 검출하고 수액의 성분을 구분 할 수 있는 측정기의 원리에 대해 제시해보려 한다. 이 측정기의 원리는 유전율의 변화를 감지하여 수액의 종류를 판단하고, 수액 내부의 기포를 검출해내는 등 의원성 사고를 근본적으로 막는 데에 그 의의가 있다. 실험결과 본 연구에서 제작한 측정기로 수액에 따른 값의 차이를 확인하였고, 발생한 기포에 대한 출력 결과를 확인할 수 있었다. 본 연구를 통해 커패시턴스 차폐의 정도가 결과의 신뢰도 측면에 중요한 요인으로 작용하고 있음을 확인 할 수 있었다. 향후 외부 간섭에 따른 노이즈에 대한 추가적인 커패시턴스 차폐 연구가 필요한 것으로 판단된다.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.5
• /
• pp.509-520
• /
• 2003

In this paper, we developed a new and robust algorithm for a practical and very efficient MPEG-4 video coding. The MPEG-4 video group has developed the video Verification Model(VM) which evolved through time by means of core experiments. And in the standardization process, MS-FDAM was developed based on the standard document of ISO/IEC 14496-2 and VM as a reference MPEG-4 coding system. But MS -FDAM has drawbacks in practical MPEG-4 coding and it does not have the VOP extraction functionality. In this research, we implemented a preprocessing system for a real-time input and the VOP extraction for a practical content-based MPEG-4 video coding and also implemented the motion detection to achieve the high compression rate of 180:1.