• Journal of the Korean Orthopaedic Association
• /
• v.55 no.6
• /
• pp.534-539
• /
• 2020

The management of severe scoliosis remains a challenge to spine surgeons. The rapid intraoperative correction of severe scoliosis may increase the risk of perioperative complications, such as neurological compromise and implant failure. To minimize these risks, various preoperative traction methods have been employed to achieve partial correction before performing definitive corrective surgery. On the other hand, some studies have shown that one of the complications associated with halo traction could lead to cranial nerve palsy, with the sixth nerve (abducens nerve) being most commonly affected. To reduce the complications, gradual increases in the traction weight and detailed neurological examinations are needed, particularly for patients who have previously undergone brain or cervical surgery. The authors report a case of sixth cranial nerve palsy by preoperative halo-pelvic traction in patients with severe scoliosis who underwent previous decompression surgery for a Chiari I malformation with a review of the relevant literature.

• Applied Chemistry for Engineering
• /
• v.33 no.5
• /
• pp.496-501
• /
• 2022

In this study, an anode material for lithium secondary batteries was manufactured using petroleum-based residual oil, which is a petroleum refining by-product. Among petroleum-based residual oils, pyrolysis fuel oil (PFO), fluidized catalyst cracking-decant oil (FCC-DO), and vacuum residue (VR) were used as carbon precursors. The physicochemical characteristics of petroleum-based residual oil were confirmed through Matrix-assisted laser desorption/ionization Time-of-Flight (MALDI-TOF) and elemental analysis (EA), and the structural characteristics of anode materials manufactured from residual oil were evaluated using X-ray crystallography (XRD) and Raman spectroscopic techniques. VR was found to contain a wide range of molecular weight distributions and large amounts of impurities compared to PFO and FCC-DO, and PFO and FCC-DO exhibited almost similar physicochemical characteristics. From the XRD analysis results, carbonized PFO and FCC-DO showed similar d₀₀₂ values. However, it was confirmed that FCC-DO had a more developed layered structure than PFO in Lc (Length of a and c axes in the crystal system) and La values. In addition, FCC-DO showed the best cycle characteristics in electrochemical characteristics evaluation. According to the physicochemical and electrochemical results of the petroleum-based residual oil, FCC-DO is a better carbon precursor for a lithium secondary battery than PFO and VR.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.3
• /
• pp.171-174
• /
• 2022

Cosmetic packing materials tend to be difficult to recycle when discarded due to the cosmetic industry's pursuit of aesthetics, functionality, and high value-added design. Pump packaging, which is widely used for the good preservation and discharge of cosmetics contents, is difficult to be separated and recycled because of a metal spring, which is in charge of pump resilience. In this study, a polypropylene spring was developed to replace the existing metal spring to improve the recyclability of the pump packaging for cosmetics, and was uni-materialized by applying to the cosmetic packing materials with 0.2 ml of discharge amount. In addition, performance test was conducted to verify the equivalence with the existing metal spring pumps as grounds for the commercialization of metal-free uni material pump packaging. The decompression leak test showed no leakage and displayed 14.8~17.5 N of pressing strength, 2.3~8.8 % of deviation in dispensing volume, and 4 occasions of pumping for initial discharge.

• Journal of Naturopathy
• /
• v.12 no.1
• /
• pp.7-15
• /
• 2023

Background: As a result of analyzing the components of wild Conyza canadensis, it contains physiologically active ingredients, so it is necessary to identify the compound. Purposes: It was to study the compound's molecular structure; a previous study showed that C. canadensis contains antioxidant substances. Methods: The ultrasonic pulverized lysate of C. canadensis stem and leaves was first extracted with 90% methanol and then five organic solvents. Next, the extracts was fractionated by HPLC, LC/MS chromatography, and NMR analyzers identified the molecular structure. Results: 100 g of dry C. canadensis was sonicated in 90% methanol and concentrated under reduced pressure to 11.96 g of a crude extract. Then, this crude was extracted with five types of solvents to obtain 123.8 mg of n-hexane, 448.2 mg of dichloromethane, 1047.7 mg of ethyl acetate (EA), 2563.8 mg of butanol, and 7.04 g of water. The EA extracts were fractionated by LC-MS and then re-fractionated to obtain F1 to F20. Next, the F15 was further fractionated to obtain nine fine fractions. Finally, the F17 fraction was re-fractionated to obtain ten fine fractions. As a result of LC-MS and NMR spectrometer analysis of the F15-7, the structure of this compound was confirmed as 3,5-dicaffeoylquinic acid. As a result of examining the structures of the F17-4 and F17-5 fractions, Quercetin-3-o-β-galactose was identified. In addition, the form of the F17-10 was confirmed to be 1,3,4-tri-caffeoylquinic acid. Conclusions: This study demonstrated that C. canadensis contained phenolic antioxidants, and its utilization may be expected.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.33-41
• /
• 2023

Herein, we selectively recovered Zn and produced ZnSO₄ from electric arc furnace dust using a hydrometallurgical process. The analysis of the properties of the electric arc furnace dust revealed that the Fe content (9.9%) was relatively low while the Mn content (19%) was high as compared to the composition of general dust. Therefore, an appropriate hydrometallurgical process was designed based on the properties of the raw materials. In the leaching process involving the use of 1.6 M sulfuric acid and 20% solid-liquid ratio at 60℃ for 1 h, 85% of the Zn and Mn got dissolved while the Fe was not leached. To selectively recover Zn, a solvent extraction process using D2EHPA as the extractant was chosen, and 99% of the Zn was extracted using 0.8 M D2EHPA with 32% saponification and an O/A ratio of 2 using counter-current 3-stage extraction. Mn was entirely scrubbed with an aqueous sulfuric acid solution of pH 1.5. Finally, Zn was concentrated and stripped using 1.5 M sulfuric acid at an O/A ratio of 4 using counter-current 4-stage stripping. The stripping solution contained 40 g/L of Zn, and 99.9% of ZnSO₄∙H₂O was obtained by vacuum distillation.

• Analytical Science and Technology
• /
• v.21 no.6
• /
• pp.543-552
• /
• 2008

This paper described the relatively sensitive and simultaneous analytical method for 3-monochloropropane-1,2-diol (3-MCDP, $C_3H_7ClO_2$, MW. 110) as well as 1,3-dichloropropan-2-ol (1,3-DCP, $C_3H_6Cl_2O$, MW. 128) in various foods. Food samples were homogenized in 5M NaCl solution, mixed with aluminum oxide and eluted with dichloromethane. The extracted chloropropanols were concentrated by rotary evaporator and $N_2$ blow serially were derivatized with HFBA (Heptafluorobutyric anhydride, $C_8F_{14}O_3$, MW. 410) and were determined by GC/MS using isotope dilution method. The characteristic molecular ions at m/z 253, 275, 289, 291, and 453 for HFBA derivatives of 3-MCPD (MW. 502) and 110, 275, and 277 for HFBA derivatives of 1,3-DCP (MW. 325) were chosen in selected ion mode. The method validation data showed sufficiently good properties of LOD (0.003 mg/kg), LOQ (0.010 mg/kg), linearity ($R^2{\geq}0.999$ at 0.010~1.000 mg/kg), and recovery rate (${\approx}97%$). The levels of chloropropanols in soy sauce, sauces, processed meat products, fishery products, and seasonings (n=56/157) determined by the presented method were 0.0~0.3 mg/kg.

• Journal of the Korean Society of Radiology
• /
• v.81 no.3
• /
• pp.644-653
• /
• 2020

Purpose We aimed to analyze postoperative multidetector CT (MDCT) of acquired spondylolysis and spondylolisthesis after posterior lumbar laminectomy. Materials and Methods We enrolled 74 patients, from 2003 to 2017, who underwent posterior lumbar laminectomy with both pre and postoperative MDCT. The patients were categorized into the following two groups: group 1 without fusion and group 2 with fusion. We analyzed laminectomy width, level and location of spondylolysis or spondylolisthesis, facet changes, and fatty infiltration of paraspinal muscles on postoperative MDCT. Results Incidence of spondylolysis or spondylolisthesis was 4 of 20 patients in group 1 and 2 of 54 patients in group 2. The laminectomy width (%) was defined as the percentage of the width of laminectomy to total lamina length. Mean laminectomy width (%) in patients with spondylolysis or spondylolisthesis was 54.0 in group 1 and 53.2 in group 2, in contrast to that in patients without spondylolysis or spondylolisthesis, which was 35.0 in group 1. The spondylolysis was observed at the level of the laminectomy and below pars interarticularis in group 1 and below the fusion mass at isthmic region in group 2. Conclusion MDCT facilitates the diagnosis of postsurgical acquired spondylolysis and spondylolisthesis and demonstrates typical location of spondylolysis. Greater laminectomy width has been associated with occurrence of acquired spondylolysis and spondylolisthesis.

• Korean Chemical Engineering Research
• /
• v.62 no.2
• /
• pp.163-172
• /
• 2024

In this study, two different scenarios for ammonia liquefaction in the green ammonia manufacturing process were proposed, and the economic-feasibility and environmental impact of each scenario were analyzed. The two liquefaction processes involved gas-liquid separation before cooling at high pressure (high pressure cooling process) or after decompression without the gas-liquid separation (low pressure cooling process). The high-pressure cooling process requires higher capital costs due to the required installation of separation units and heat exchangers, but it offers relatively lower total utility costs of 91.03 $/hr and a reduced duty of 2.81 Gcal/hr. In contrast, although the low-pressure cooling process is simpler and cost-effective, it may encounter operational instability due to rapid pressure drops in the system. Environmental impact assessment revealed that the high-pressure cooling process is more environmentally friendly than the low-pressure cooling process, with an emission factor of 0.83 tCO₂eq less than the low-pressure cooling process, calculated based on power usage. Consequently, the outcomes of this study provide relevant scenario and a database for green ammonia synthesis process adaptable to various process conditions.

• Food Science and Preservation
• /
• v.20 no.6
• /
• pp.877-885
• /
• 2013

Wine extracts of four different berry fruits, such as mulberry, blueberry, strawberry, and raspberry, were investigated for antioxidant, anti-tyrosinase, and ${\alpha}$-glucosidase activities by using in vitro assays. Additionally, quantitative changes of ${\alpha}$-glucosidase inhibitor in mulberry wine were determined by HPLC according to mulberry cultivars and fermentation process. Among four berry wines examined, mulberry wine showed the most potent ${\alpha}$-glucosidase inhibitory activity with 69.37% at 0.23 mg/mL, while blueberry and strawberry wines exhibited the strongest inhibition against DPPH radical and tyrosinase activity, respectively. Four compounds were isolated and purified from mulberry wine by a series of isolation procedures, such as solvent fractionation, and Diaion HP-20, ODS-A, and Sephadex LH-20 column chromatographies. Among them, Comp. 4 exerted the strongest ${\alpha}$-glucosidase inhibitory activity ($I_C_{50}=31.57{\mu}M$), and its chemical structure was identified as quercetin by UV and NMR spectral analysis. Finally, the "Daeseongppong" (16.83 ppm) muberry wine had larger amount of quercetin than the "Iksuppong" (14.85 ppm) and "Cheongilppong" (8.92 ppm) mulberry wines, but their contents of three mulberry wines decreased considerably with aging process. These results suggest that mulberry wine containing quercetin acted as ${\alpha}$-glucosidase inhibitor may be useful as a potential functional wine for improving diabetic disorder.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.11
• /
• pp.1518-1524
• /
• 2011

This study was investigated the quality characteristics and antioxidant activities of the Rehmanniae radix (Rehmannia glutinosa Libosch. var. purpurea Makino) paste (RRP) and Rehmanniae radix preparata extract (RRPP). RRP and RRPP were made from vacuum concentrates of hot water extracts. The sugar contents of RRP and RRPP were 65.3 and 72.0$^{\circ}Brix$, respectively, whereas the reducing sugar contents were 2.4% and 44.9%. The pH level was lowest in the RRPP. The DPPH and hydroxyl radical scavenging activity of RRPP were much higher than those of RRP. Total phenol contents of RRP and RRPP were 2.15 mg/mL and 12.36 mg/mL, respectively. FRAP values of RRP and RRPP were 0.55 mg/mL and 2.02 mg/mL, respectively. Based on these results, it can be concluded that RRPP was the most appropriate in terms of both physicochemical and antioxidative activities.