• Proceedings of the Korean Society of Computer Information Conference
• /
• 2009.01a
• /
• pp.309-312
• /
• 2009

현대 사회가 모바일 컴퓨팅 시대로 나아가면서 개인들이 휴대하는 모바일 기기의 발전이 눈부시게 이루어지고 있다. 특히, 사용자들의 요구사항이 점점 더 작은 크기의 기기를 원하고 그와 상반되어 더욱 큰 화면을 통하여 더 많은 정보를 한 눈에 처리하기를 원하면서, 별도의 입력장치가 필요 없이 전연 터치스크린을 이용하는 모바일 기기의 확산이 늘어나고 있다. 이에 따라 터치스크린 방식에 관해 알아보고, 특히 대표적으로 사용되는 감압식과 정전식 터치스크린 방식의 차이점을 알아본다. 또한 멀티 터치 구현이 어려운 감압식 터치스크린 방식에서 선형센서를 이용하여 다중 입력 방식 터치스크린 구현 방안을 제안한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.2853-2857
• /
• 2012

In this paper, 3-dimensional designing program, Solidwork was used in designing in order to investigate structure and characteristics of a pressure reducing valve which was used as an apparatus for keeping regulated pressure of water supply equipment system and also 2-dimensional drawing was made to manufacture a pressure reducing valve in the field.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.771-776
• /
• 1998

울진 원전 3,4 호기를 대상으로 MAAP4.0.2 코드를 이용하여 발전소 정전사고를 모의/분석했다. 본 분석에서는 사고진행에 따른 일.이차계통의 상태변화를 원자로용기 파손때까지 상세 파악하였다. 사고관리 관점에서, 발전소 정전사고는 이차측의 대기방출밸브를 통한 강제감압에 의해 사고진행을 완화할 수 있으며 이러한 운전원 조치에 의한 완화효과를 검토하였다 그 결과 감압시작 2시간후에 일차측은 약 24$^{\circ}C$ 의 과냉각도를 보이며 안정되었고. 사고시작 1시간 후부터 3시간 동안의 강제감압이 성공한 경우, 노심노출시간 기준으로 약 2시간의 지면효과가 있었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.395-398
• /
• 2010

감압비등에 의한 미립화는 더 미세한 직경의 액적을 얻을 수 있고, 분무각이 증가하며, 더 좋은 혼합특성을 갖는 다는 점에서 단순 압력식 미립화와 차이가 난다. 감압비등이란 과열된 액체를 포화 압력 이하의 대기 중으로 분사하여 급격한 비등에 의해 이루어지는 미립화이다. 본 연구는 금속 연료를 이용한 추진기관의 산화제인 물 공급기술에 감압비등과정을 이용한 와류분무를 적용시키기 위해 수행됐다. 분열길이와 같은 거시적 특성은 Charge-Couple Device(CCD) 카메라를 이용해 측정하였고, Sauter Mean Diameter(SMD)와 SMD분포와 같은 미시적 특성은 Global Sizing Velocimetry(GSV) 시스템을 이용해 측정했다. 실험은 압력과 온도, 대류 속도를 변화시키며 진행했다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.565-570
• /
• 1996

$^{32}$P는 순수한 $\beta$$^{-}$ 방출핵종(방출에너지 ＝ 1.71 MeV, 반감기 ＝ 14.3일)이며 의료용, 표지화합물 합성용, 유전공학 실험용 등으로 널리 사용되므로 고품질의 $^{32}$P의 수요에 부응하기 위해 감압증류법을 개발하였는 바 그 방법과 결과는 다음과 같다. 연구로 2호에서 중성자 조사된 황 표적을 감압 증류용기내에서 5~10 mmHg의 감압하에 200~30$0^{\circ}C$로 가열하여 황을 증류해 낸 다음 묽은 염산을 역류시켜 넣고 $^{32}$P 를 울궈냈다. 이 용액을 이온교환 수지로 정제하여 약 60 mCi/batch의 정제 $^{32}$P를 얻었다. 이온교환수지에 흡착되는 $^{32}$P의 방사능은 전체의 3% 미만이었고 여기에 흡착되는 불순 핵종은 $^{131}$ Ba, $^{85}$ Sr, $^{59}$ Fe, $^{65}$ Zn, $^{60}$Co이었다. 이 방법으로 얻은 $^{32}$P 최종제품은 핵종순도 >99%, 방사화학적 순도 >98%, 고형성분 함량 <1.2 mg/mL 이어서 그 품질이 우수함을 알 수 있었다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.83-89
• /
• 2003

A temperature- and pressure-reducing process is utilized to handle the spent fuel assembly in the post-irradiation examination facility. This process includes three separated unit processes. First one is the decontamination process to clean the spent fuel assembly casks. The second process is the temperature-reducing process to reduce the temperature elevated by decay process in the spent fuel assembly. The third process is the filtration process to remove insoluble particles existed in the casks using filters. Up-to-date technologies as well as practical theories related to the temperature- and pressure-reducing process is reviewed in this report. The test-operation process for various tests and the test results of the temperature- and pressure-reducing process for J-44 and K-23 spent fuel assemblies are also described in detail. This report must be effectively used for the normal operation of the facility with the awareness of unprecedented problems which could occur by continuing operation of the PIE facility.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.2
• /
• pp.5-13
• /
• 2020

The relief wells have been studied to be effective in seepage control in small dams such as agricultural dams. However, quantitative studies on the effects of the relief well are rare and there is no design standard also. To quantitatively analyze the effects of the seepage control in small dams, the research of up-lift pressure influencing the toe of dam body was conducted by seepage analysis, which investigates the behavior characteristics, according to the conditions of dam and foundation. The effect of seepage control was studied by analyzing the reduction effect of up-lift pressure at foundation ground of the toe of downstream dam slope depending on the installation of the relief well. As a result, it was found that the relief wells are effective in reducing the pore water pressure in the foundation, which can cause piping and sliding failure.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.6
• /
• pp.1101-1108
• /
• 2010

This study was conducted to investigate whether whole body cryotherapy and spinal decompression have effectiveness on the pain, lumbar flexion range of motion, and global perceived effect scale in patients with lumbar disc herniation. Thirty subjects were participated in this study. And they were all randomly divided into whole body cryotherapy and spinal decompression group. To evaluate the effects of whole body cryotherapy and spinal decompression, subjects were evaluated by using visual analogue scale, lumbar flexion range of motion, and global perceived effect scale. The assessment parameters were evaluated before, after 2 weeks treatments. And we received a consent form whole body cryotherapy subjects. The results of paired t-test, independent t-test, and ANCOVA analysis of variance showed that pain, lumbar flexion range of motion, global perceived effect scale were significantly improved after than before therapy in whole body cryotherapy group. So we conclude that whole body cryotherapy has effectiveness on the pain, lumbar flexion range of motion, and global perceived effect scale in patients with lumbar disc herniation.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.1
• /
• pp.15-23
• /
• 2019

In this study, an extinguishment model of a three-dimensional solid propellant rocket was developed by combustion and fast depressurization to control the thrust of a solid rocket. Computational fluid dynamics simulation was carried out to ascertain the change in flow patterns in the combustion chamber and the extinguishment process by using a pintle. An ammonium perchloride was used as the target propellant and the dynamic behavior of its major parameters such as temperature, pressure, and burning rate was predicted using the combustion model. The dynamic behavior of the combustion chamber was confirmed by fast depressurization from an initial pressure of 7 MPa to a final pressure of 2.5 MPa at a depressurization rate of approximately -912 MPa/s.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.37-44
• /
• 2021

In this study, shape design and material selection were carried out for a two-stage pressure-reducing regulator to compensate for the shortcomings of a one-stage mechanical decompression regulator. The shape of the contact surface of the depressurization unit was considered, material was selected, and the shape was designed to compensate for the pulsation and slow response through the two-stage decompression and to solve the problem of high pressure deviation. In terms of airtightness, the deformation amount of TPU showed a small amount of displacement of up to 15.82%. Considering the fact that it is applicable to various hydrogen fuel supply systems by securing universality by applying electronic solenoids to the second pressure reduction, magnetic materials were selected. The hydrogen embrittlement and corrosion resistance were evaluated to verify the plating process. Surface corrosion did not occur in only the case of Cr plating. The elongation during the corrosion process was compared using a tensile test, and there was a difference within 2%.