• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.75-77
• /
• 2005

전력선통신 시스템은 일반적인 통신시스템과는 달리 전력선에 연계된 다양한 부하기기들의 동작 및 변동에 따른 잡음이 발생한다. 특히 부하의 기동, 정지 시 발생하는 임펄스 잡음은 통신성능 저하의 주된 요인임으로 통신성능 향상과 신뢰성 높은 데이터 전송을 위하여 임펄스 잡음 제거와 임펄스 잡음 영향을 감쇠하기 위한 방안이 절실히 요구되고 있다. 따라서, 본 논문에서는 전력선 통신시스템에서 전송된 데이터를 오류 없이 복원해 내기 위하여 적응형 정합필터링 기법을 제안하고, 수신 측에서 임펄스잡음에 따른 최적의 탭 계수를 선택해 효과적으로 임펄스잡음을 제거하는 기법을 확립하였다. 또한, 제시한 알고리즘에 다양한 임펄스 잡음의 모델을 반영하여 비트오율에 대한 모의실험을 행하고 결과를 도출함으로써 제안 방식의 유용성과 신뢰성을 확인하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.1
• /
• pp.1-7
• /
• 2003

The effect of the passive anti-rolling tanks(ART) decreases when the roll period of the vessel does not match the designed oscillating period of the fluid in the tank. In order to improve the effect of the passive ART, the damping plates are installed in the lower duct of the ART to adjust the oscillating period of the fluid. The effects of the damping plates on the oscillating period of the fluid and the changes of the stabilizing moments are examined through the series of bench tests. Acryl model tank larger than 1m breadth is made to minimize the viscous effect of the tank and the stabilizing moments of the tank are measured for various roll angles. Using the obtained tank damping coefficient, RAO(Response Amplitude Operator) value in the resonance range is computed and the stabilizing effect of a ART has been estimated.

• Computational Structural Engineering
• /
• v.8 no.4
• /
• pp.173-180
• /
• 1995

Application of soil grouting method was adopted to reduce the vibration amplitude which propagates from the source. The direct formulation of the Boundary Element Method was applied to make the numerical model of soil. It was found form this study that the most effective location of the grouting layer is directly under the source of the vibration and the width of the grouting layer does not need to be longer than the required width which can be determined by numerical analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.101-105
• /
• 2008

A flexible structure submerged in acoustic fluid is affected by its surrounding fluid. In transient response of a submerged structure, the coupled effect between structures and surrounding fluid emerges as damping and added mass at early and late time, respectively. Therefore, the characteristics of submerged structure such as natural frequencies and damping coefficients are changed by its surrounding fluid. In this paper, the analytic modal equation of a spherical shell surrounded by water and air is dealt with. Through the example, the damping coefficients and natural frequencies of flexible structures are studied for various external acoustic fluid and structures.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.2
• /
• pp.313-321
• /
• 1995

The effects of the temperature rise and the turbulence are very important factors to predict the accurate performance of a large tilting pad journal bearing. In this study, the dynamic characteristics of a large tilting pad journal bearing are analyzed, taking into account the three dimensional variation of lubricant viscosity and turbulence. The effects of the temperature rise and the turbulence on the stiffness and damping coefficients are investigated in comparison with the results from the laminar or isothermal theory. The stiffness and damping coefficients increase due to the turbulence but decrease due to the temperature rise. The results show that the effects of both the temperature rise and turbulence must be considered simultaneously in order to predict the dynamic characteristics of a large tilting pad journal bearing more accurately.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.10
• /
• pp.760-766
• /
• 2003

This paper is concerned with the eddy current damper which can be used to enhance the damping of the host structure. The operating principle of the eddy current damper is first explained in detail. The dynamic interaction between the magnets and the copper plate produces eddy current thus resulting in the damping force. By attaching the eddy current damper to the host structure, the damping of the total structure can be increased so that vibrations can be suppressed. The advantage of the eddy current damper is that it doesn't require any electronic devices and power supply The effect of the eddy current damper on the global dynamic characteristics of the structure is investigated by considering the cantilever with the eddy current damper. Experimental results show that the eddy current damper is an effective device for vibration suppression.

• Journal of the Microelectronics and Packaging Society
• /
• v.5 no.2
• /
• pp.13-20
• /
• 1998

고속 디지털 MCM 응용을 위해 MCM-D 와 MCM-SLC 배선에서 CMOS 버퍼의 신호상승시간에 따른 신호전송특성을 연구하였다. 고속신호처럼 버퍼의 내부저항이 배선의 임피던스보다 작아 발생하게 되는 과도한 ringing은 MCM-D와 같이 lossy line의 전송감쇠 효과로 overshooting 이나 undershooting을 줄일 수 있지만 ringing에 의한 신호왜곡을 근 본적으로 막기위해서는 CMOS버퍼와 배선사이에 적절한 종단을 통해 임피던스 비해 크면 배선의 캐패시턴스에 의해 RC 지연이 증가한다. 그런데 MCM-D 배선은 단위길이당 캐패 시턴스도 작고 배선길이를 줄일수 있으므로 총 RC 지연은 MCM-SLC보다 작았다. 결론적 으로 MCM-D 배선이 MCM-SLC 배선에 비해 고속 디지털 MCM기판으로 적합한 것을 알 수 있었다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.453-456
• /
• 2006

To examine the effect of shape and crest width variation of a permeable submerged breakwater on the wave energy dissipation, Two-Dimensional numerical model with Large Eddy Simulation, which is able to simulate directly WAve Structure Seabed interaction (hereafter, LES-WASS-2D) has been newly developed. A good agreement has been obtained by the comparison between the existing experimental results and LES-WASS-2D model's results for the permeable submerged breakwater. Moreover, based on the LES-WASS-2D model, the wave energy dissipation due to a permeable submerged breakwater are discussed for regular and irregular waves with relation to its crest width and shape.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.150-153
• /
• 2006

점탄성 복합재는 간단한 작업으로 큰 감쇠 효과를 볼 수 있어 사용이 날로 늘어나고 있다. 그런데 점탄성 복합재의 특성은 온도에 민감하게 반응하며 변화한다. 그러므로 점탄성 복합재의 모드해석 시 온도 변화에 따른 해석이 필요하다. 본 논문에서는 한쪽면에 점탄성재를 부착한 Oberst beam을 일단고정 상태로 설치하여 실험 온도를 $-15{\sim}45^{\circ}C$로 변화시켜가며 전달함수를 이용하여 실험모드해석을 실행하였다. 그리고 온도 차이에 따른 모드형상을 비교하였다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.315-318
• /
• 2001

We are proposing a new mobile phone antenna, which has a specially manufactured Mn-Zn cylindrical ferrite bead inside of the helical coil of the antenna. The extended antenna radiation patters and the spatial peak SAR averaged over 1 gram simulated tissue with and without the ferrite bead insertion were measured at 824 MHz. The results show that the ferrite bead resulted in SAR reduction about 20 %, and reflection coefficient increase about 7 % for the extended antenna. The applicability of this scheme to the antenna mass production is quite feasible.