• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.159-160
• /
• 2006

This paper discusses sensitivity analysis for determining adequate locations of series-type FACTS devices. The main objective of FACTS reinforcement is to alleviate line over-loadings against violation of thermal limits after disturbances. This paper, to obtain the information concerning series-type FACTS locations, proposes a formulation for the sensitivity of the PI (Performance Index) with respect to the variation of the branch parameters, and applies to 5-bus test system to show the effectiveness of the sensitivity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.201-204
• /
• 1992

In the conventional load flow technique, it is assumed that the generator at the slack bus is used to supply the transmission losses and the change of power due to the generator outage. The assumption is not true in physical sense. This paper presents a new load flow technique that considers the governor-frequency characteristics and load-frequency characteristics and the technique is consistent with the actual power system phenomenon. This paper proposes an efficient methodology using sensitivity with the new technique for contingency analysis, which is used to calculate the line flows. Computational results of this technique applied to IEEE 14-bus system are presented.

• 한국소음진동공학회논문집
• /
• 제25권11호
• /
• pp.731-738
• /
• 2015

This study proposed the method of the multi-crack detection using the sensitivity coefficient matrix which is calculated from the change of eigenvalues and eigenvectors before and after the crack. Each crack is modeled by a rotational springs. The method is applied to the cantilever beam with miulti-crack. The eigenvalues and eigenvectors are determined for different crack locations and depths. The prediction of multi-crack detection are in good agreement with the results of structural reanalysis.

• 한국추진공학회지
• /
• 제1권2호
• /
• pp.48-57
• /
• 1997

본 연구에서는 치구 설계단계에서 치구 위의 여러 시험물부착점들에서의 반공진 진동수들을 고려하여 그 감도를 계산하고, 치구의 구조변경을 수행하여 시험물부착점들에서의 반공진 진동수들을 일치시키므로서 종래의 진동시험제어시 나타나는 반공진 진동수에서의 문제점을 제거할 수 있고, 그 결과 시험물부착점들에서의 스펙트럼이 시험규격에 정해진 스펙트럼대로 진동시험이 수행될 수 있게 하는 데 있다. 그리고 충격가진실험을 통해 제안한 기법에 대한 실제 치구제작에 적용 가능성을 검증하였다.

• 설비공학논문집
• /
• 제13권1호
• /
• pp.38-47
• /
• 2001

The operation characteristics of variable conductance heat pipe(VCHP) were numerically investigated by using 1-dimensional diffuse-front model. For different boundary conditions, the amount of non-condensible gas charge and dimension of gas reservoir were obtained by iterative calculation. It is found that the amount of non-condensible gas charge and dimensions of gas reservoir have an effect on the temperature control of condenser for the given operating condition of VCHP. The numerical results show that VCHP has an excellent capability of temperature control when subjected to a change in the heat input.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.191-197
• /
• 2010

In spite of a large amount of previous research, detail study on modified mass in proportional damping system is not well understood. It is common to predict structural dynamic design parameters due to the change of mass, but to predict the amount of modified mass and the location where the mass is being modified are rarely found in previous literature. Such inverse problem required detail analytical study in order to understand structural modification in proportional damping system. This paper predicts the modified mass and the modified mass location in proportional damping system using sensitivity coefficients and iterative method. The sensitivity coefficients are obtained from the change of eigenvectors due to mass modification. This method is applied to a horizontal beam and three degree of freedoms system. To validate the predicted changing mass and its location, the obtained results are compared to the reanalysis result which shows good agreement.

• Journal of Advanced Marine Engineering and Technology
• /
• 제16권3호
• /
• pp.51-57
• /
• 1992

Authors had analyzed the Press machine's vibrational characteristics by Substructure Synthesis Method. This paper discribes the structural Dynamic Optimization for the machine using Sensitive Analysis Method. The substructure synthesis method and sensitive analysis methods are used for the vibration analysis and structural modification. The results obtained are as follows ; 1. The tooling precision of the press machine is ruled by the bending vibration of the slide. 2. The structural Modification Method for minimizing impact responses is proposed, and modal analysis and sensitive analysis method are introduced to solve it. 3. The impact responses of running machine were reduced to 40% of the unmodified machine by using the proposed method.

• Journal of Advanced Marine Engineering and Technology
• /
• 제16권1호
• /
• pp.47-53
• /
• 1992

This paper is discussing the Optimum Structural Modification by the Sensitive Analysis Method. The mokificxation for the first Mouth Open Mode of the C type structure was done by using coordinate sensitivities and thickness sensitivities. The results obtained are as follows; 1. the vibration could be minimized by reducing multiples of mode components of impact point and response point. 2. the tooling precision of the Press machine could be minimized by reducing relative vibration amplititutes between the tool and the object to be tooled. 3. the mode componets of 2 points could be identified by using the coordinate sensitivites for the C type structure. 4. the mode components of 2 points could be iodentified by using the thickness sensitivities for the C type structure.

• 한국통신학회논문지
• /
• 제13권6호
• /
• pp.510-520
• /
• 1988

無限誤長 상태 공간 디지틀 필터를 有限誤長 상태 공간 디지틀 필터로 실현할 때 量子化 誤差인 상태 공간 계수〔ABCD〕의 미소 변동에 기인한, 출력 오차 分散을 $\Delta$〔ABCD〕의 分散으로 正規化하였다. 즉, S=E을 統計的 感度로 정의하고 시스템 구조적 성질을 나타내는 可制御性 Gramian, 그리고 2차 모드 해석 방법을 상태 공간 디지틀 필터에 확장해서 最小 統計的 感度를 갖는 실현 구조를 합성하였으며 시뮬레이션을 통하여 최소 구조 합성의 유효성을 확인하였다.

• 대한전기학회논문지
• /
• 제43권3호
• /
• pp.372-380
• /
• 1994

A systematic procedure for the elements of system state matrix in multimachine systems with loads and eigenvalue technique which utilize stage matrix have widespread application in the analysis of small signal stability. Synchronous machines are represented by either a two-axis model or classical model. The interrelationship of submatrices of system matrix is investigated. Once elements of one submatrix are determined, they can be used to calculate the elements of the other submatrix. The approach is useful in the eigenvalue sensitivity analysis for various initial conditions and for the adjustment of generator controller parameters. It is illustrated for a three-machine and nine-bus multimachine system(WSCC system) with constant impedance loads.