• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.837-844
• /
• 1986

Valve motion is one of the most important factors which affect on engine noise and efficiency. Since engine valve train is characterized as a spring-mass system, its dynamic response should be analyzed for varing operation RPM range. In this paper, a OHV type valve train motion was studied by dynamic model analysis. A five degrees of freedom model was set up and simulated for different operating conditions. Also in order to varify the usefulness of the model, the valve displacement and the pushrod force were directly measured for varying RPMs and compared with the simulation results. Then sensitivity analysis was done with the five degrees of freedom model in order to suggest for valve train design change.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.337-337
• /
• 2008

Acoustic emission(AE) 센서의 감도개선을 위해 적합한 압전소자의 특성향상에 대해 연구하였다. AE 센서기술은 재료 내부에 마이크로크랙에 의해 변형과 손상이 생길 때 발생하는 기계적인 진동을 고감도 압전소자를 통해 전기적인 신호로 변환해 재료의 이상 유무를 알 수 있는 유용한 방법이다. AE 센서는 압전소자와 구리 캡 그리고 구리와 황동재질의 떨림판으로 구성되어 있다. 재료의 손상을 알기위한 변위가 낮을 경우 약한 AE 신호가 발생하며 검출하기가 어렵다. 미세변위에 의한 AE신호를 검출하기 위해서는 우수한 전기기계결합계수 (kp)와 압전상수($d_{33}$)를 갖는 압전소자가 필요하다. 이에 본 연구에서는 Pb$(Zr_{0.54}Ti_{0.46})O_3$ + x wt%$Cr_2O_3$ + y wt%$Nb_2O_5$ 조성에서 $Cr_2O_3$, $Nb_2O_5$ 첨가량 x, y 변화에 따른 압전특성과 AE센서특성을 고찰하였다.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.250-253
• /
• 1997

The effect of dispersion in optical transmission system changes according to chirp and SPM. Chirp depends on the modulation condition of an external modulator. SPM is proportional to signal power. In this paper, we analyzed the pulse broadening due to SPM and chirp in the system with dispersion by using Split Step Fourier Method and calculated the optimum chirp parameter for 400 km transmission system. Experimental results are presented also.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.10
• /
• pp.1388-1398
• /
• 2000

A pipe prover is a flowmeter calibrator used in flow measurement field. Gravimetric and volumetric methods were applied to determine the basic volume of the pipe prover. Uncertainty of its basic volume measurement was evaluated in accordance with the procedure recommended by International Organization for Standardization. The combined standard uncertainty of determining the basic volume was estimated from the sensitivity coefficient and the standard uncertainty of independent variables. It was found that the uncertainties of the weighing and volume measurements have dominant influence on that of the basic volume determination. With the quantitative analysis of the sensitivity coefficient, the contribution of the each variable uncertainty to the combined standard uncertainty of the basic volume is shown clearly.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.345-347
• /
• 2004

In small signal stability analysis of power systems, eigenvalue analysis is the most useful method and the detailed modeling of generator has an important effect to the eigenvalues. Generator full model is used for precise dynamic analysis of generators and controllers while two-axis model is used for multi-machine systems because of the reduced order of the state matrix. Also, the eigenvalue sensitivity coefficients are used for optimizing controller parameters to improve system stability. This paper compare the first and second order eigenvalue sensitivity coefficients of controllers using generator full model with those of two-axis model. As a result of an example, the estimated eigenvalues using the first and the second eigenvalue sensitivity coefficients using generator full model is very close to those of state matrix. Also the error ratios throughout a wide range of controller parameters is less than $1\%$.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.11
• /
• pp.731-738
• /
• 2015

This study proposed the method of the multi-crack detection using the sensitivity coefficient matrix which is calculated from the change of eigenvalues and eigenvectors before and after the crack. Each crack is modeled by a rotational springs. The method is applied to the cantilever beam with miulti-crack. The eigenvalues and eigenvectors are determined for different crack locations and depths. The prediction of multi-crack detection are in good agreement with the results of structural reanalysis.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.170-176
• /
• 2005

In this paper, we proposed watermarking algorithm based on wavelet transform. Discrete wavelet transform is involved to calculate additive energy strength. Considering imperceptibility, after computing contrast and texture sensitivity in gray-level image, we inserted watermark with variable weight due to the feature of coefficient block. Consequently, applying human visual system, the experimental results showed that the proposed algorithm satisfied the properties of robustness and imperceptibility that are the major conditions of watermarking.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.4
• /
• pp.561-571
• /
• 2001

The standard uncertainty of flowrate measurement is obtained by combining that of independent variables. Gravimetric and volumetric method were applied to determine the flowrate and the standard uncertainties of flowrate measurement by both methods were evaluated in accordance with the procedure recommended by International Organization for Standardization. The combined standard uncertainties of determining the flowrate were estimated from the sensitivity coefficient and the standard uncertainty of independent variables. For practical application, the methods for evaluating and expressing uncertainty in flow measurement were discussed. It was found that the uncertainties of the weighing and time measurement in gravimetric method, the volume and time measurement in volumetric method have dominant influence on that of flowrate measurement. With the quantitative analysis of the sensitivity coefficient, the contribution of the each variable uncertainty to the combined standard uncertainty of flowrate measurement is shown clearly.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.1118-1120
• /
• 1997

This paper presents a simple method for evaluating of voltage stability using the line flow equation. Line flow equations ($P_{ij}$, $Q_{ij}$) are comprised of state variable, $V_i$, ${\delta}_i$, $V_j$ and ${\delta}_j$, and line parameter, r and x. Using the feature of polar coordinate, these becomes one equation with two variables, $V_i$ and $V_j$. Moreover, if bus j is slack or generater bus, which is specified voltage magnitude, it becomes one equation with one variable $V_i$, that is, may be formulated with the second-order equation for $V_i^2$. Therefore, multiple load flow solutions may be obtained with simple computation, and the formulated equation used for approximately evaluating of voltage stability limit considering line flow sensitivity. The proposed method was validated to 2-bus and IEEE 6-bus system.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.119-121
• /
• 2003

In small signal stability analysis of power systems, eigenvalue analysis is the most useful method and the detailed modeling of generator gives an important effect to the eigenvalues. Generator full model is used for precise dynamic analysis of generators and controllers while two-axis model is used for multimachine systems because of the reduced order of the state matrix. Also, the eigenvalue sensitivity coefficients are used for optimization of controller parameters to improve system stability. This paper compare the first order eigenvalue sensitivity coefficients of controllers in case of generator full model with those of two-axis model. As a result of an example the estimated eigenvalues using sensitivity coefficients in case of generator full model is very close to those of state matrix within 1% error ratios.