• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.428-431
• /
• 2002

본 논문에서는 경쟁적 전력시장에서 송전제약에 관한 비용을 적절히 할당하는 방법을 제시하고자 한다. 혼잡비용을 할당하는 방법으로는 모든 사용자들에게 똑같이 배분하는 방법과 혼잡의 원인을 제공한 사용자에게 정도에 따라 가중하여 혼잡비용을 할당하는 nodal pricing과 zonal pricing이 있다. 계산의 신속성과 복잡성으로 인해서 zonal pricing이 유용한 방법으로 사용되고 있다. 기존의 분할 기술은 계통운영자가 설정한 한계범위의 모선들을 zone으로 형성하는 통계적인 방법을 사용했다. 이 방법은 운영자의 임의성이 반영되는 모호한 알고리즘이라는 단점을 가지고 있다. 그래서 본 논문에서는 한계비용민감도를 이용한 계통분할 방법을 제안하였다.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.201-204
• /
• 1992

In the conventional load flow technique, it is assumed that the generator at the slack bus is used to supply the transmission losses and the change of power due to the generator outage. The assumption is not true in physical sense. This paper presents a new load flow technique that considers the governor-frequency characteristics and load-frequency characteristics and the technique is consistent with the actual power system phenomenon. This paper proposes an efficient methodology using sensitivity with the new technique for contingency analysis, which is used to calculate the line flows. Computational results of this technique applied to IEEE 14-bus system are presented.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.2
• /
• pp.48-57
• /
• 1997

The method of antiresonance frequency analysis of multi-input system is proposed. The structural dynamic modification using antiresonance frequency analysis is also applied to reduce the undertest at specimen attachment points on the fixture in environmental vibration test, which is resulted from the inconsistency of antiresonance frequencies. Several computer simulations show that the proposed method can remove the undertest problem which is not removed in conventional vibration test control. And the effectiveness of the method is verified with the impact hammer excitation of aluminium fixture model.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.10-16
• /
• 2001

A new digital serrodyne (DS) signal processor for the close-loop fiber optic gyroscope was designed and implemented. It is based on a new algorithm that can solve the remaining problems of the existing digital serrodyne processing by utilizing a new modulation wavefonn. The algorithm was implemented in an FPGA and tested. Theoretical limit and experimental value of the random walk were measured to be 2.6 and 3.3 deg/hr/$\sqrt{Hz}$, respectively. And drift of the processor is smaller than that by Shupe's effect.effect.

• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.179-185
• /
• 1998

Mg2SiO4 열형광체에 란탄계 금속 Tb, Tm, La, Ho, Dy 및 Nd를 활성체로 첨가하여 열형광체를 제작했으며, Peak shape법으로 활성화에너지를 계산한 결과 0.53-1.77eV였으며, 발광과정의 차수는 전부 2차였다. 저 에너지 X-선에 대해 매우 높은 감도를 나타내었으므로 방사선 센서 소자로 개발하기 위한 기초 자료가 될 것이다.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.104-106
• /
• 2004

GIS의 금속으로 차폐된 폐쇄형 스페이서(barrier)의 에폭시 주입구를 통해 방사되는 극초단파 부분방전 신호를 검출할 수 있는 외장형 UHF PD 센서를 제작하였다. 센서에 내장되는 패치안테나는 모노폴(monopole)과 다이폴(dipole) 형태로 설계하여 고주파 전자기장 해석 툴을 이용하여 각각의 특성을 계산하고 분석하였다. 제작된 센서는 362kV GIS의 차폐형 스페이서의 에폭시 주입구에 장착하고 각 센서의 PD 검출 감도와 주파수 특성을 측정하고 비교하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.2042-2043
• /
• 2007

고압회전기의 운전중 부분방전을 효과적으로 측정하고 진단하기위해 고정자 권선과 슬롯사이에 취부 되는 방향성 결합기형태의 부분방전센서가 일부 사용되고 있다. 기존 결합기형 센서는 마이크로스트립 등의 전송선로 타입으로, 센서 출력 단자의 효과적인 매칭을 목표로 설계되었으나, 센싱도체의 폭이 좁아 권선으로부터 효과적인 커플링이 힘들다. 본 논문에서는 고정자 권선 및 슬롯 구조의 전계분포 계산결과를 바탕으로 부분방전 신호 측정에 효과적인 형태의 센서를 설계하였다. 제작된 센서를 실제와 동일한 고정자 권선 및 슬롯 구조에서 타 센서와 비교하여 성능을 시험한 결과, 기존 마이크로스트립타입의 센서와 상용센서에 비해 좋은 감도를 가지는 것으로 나타났다.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.4
• /
• pp.383-390
• /
• 2004

We describe the in-flight sensitivity calibration of the Far ultraviolet Imaging Spectrograph (FIMS, also known as SPEAR) onboard the first Korean science satellite, STSAT-1, which was launched in September 2003. The sensitivity calibration is based on a comparison of the FIMS observations of the hot white dwarf G191B2B, and two O-type stars Alpha-Cam, HD93521 with the HUT (Hopkins Ultraviolet Telescope) observations. The FIMS observations for the calibration targets have been conducted from November 2003 through May 2004. The effective areas calculated from the targets are compared with each other.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.6
• /
• pp.344-352
• /
• 2011

In this paper, the resonant characteristic of a Tonpilz transducer with a fixed tail mass has been studied by means of an equivalent circuit approach. An equivalent circuit has been designed to describe the characteristic of a Tonpilz transducer that has an additional resonance because of its fixed tail mass. The transmitting voltage response of the transducer calculated by the designed circuit has been compared with that by the FEA (finite element analysis) to confirm the validity of the circuit. This equivalent circuit approach produces identical results with the FEA, in which the variation of resonant frequencies and TVR has been clearly figured out in relation to the stiffness of the mounting fixture and the mass of the tail mass. The suggested equivalent circuit can be utilized to figure out the characteristics of the Tonpilz transducer more efficiently than FEA that requires much calculation time and revision of the models in accordance with the variation of design variables.

• Korean Journal of Optics and Photonics
• /
• v.20 no.2
• /
• pp.71-75
• /
• 2009

A compact electric field probe sensor incorporating two different electro-optic materials of $LiNbO_3$ and GaAs was proposed and fabricated, and it was used to measure the strength of the horizontal and vertical fields generated by a microstrip ring-resonator filter. The sensitivities of the sensors in $LiNbO_3$ and GaAs were $9.315{\mu}V/\sqrt{Hz}$ and ${\sim}49.346{\mu}V/\sqrt{Hz}$ respectively, and their signal to noise ratios were approximately ${\sim}50\;dB$ and ${\sim}40\;dB$ respectively. And the operating frequency range was up to ${\sim}1.2\;GHz$. The electric field profile for the test circuit was scanned and found to be in good agreement with that obtained by using the HFSS simulation.