• Journal of Radiation Protection and Research
• /
• v.24 no.2
• /
• pp.73-86
• /
• 1999

The ion-exchange method for the purification of primary coolant has been used broadly in PWR(pressurized water reactor)-type nuclear power plants due to its high decontamination efficiency, simple system, and easy operation. However, its non-selective removal of metal and non-radionuclides shortens its life, resulting in the generation of a large amount of waste ion-exchange resin. In this study, the feasibility of electrodeionization (EDI) was investigated for the purification of primary cooling water using synthetic solutions under various experimental conditions as an alternative method for the ion exchange. The results shows that as the feed flow-rate increased, the removal efficiency increased and the power consumption decreased. The removal rate was observed as a 1000 decontamination factor(DF) at a nearly constant level. For the synthetic solution of 3 ppm TDS (Total Dissolved Solid), the power consumption was 40.3 mWh/L at 2.0 L/min of feed flow rate. The higher removal rate of metal species and lower power consumption were obtained with greater resin volume per diluting compartment. However, the flow rate of the EDI process decreased with the elapsed time because of the hydrodynamic resistivity of resin itself and resin fouling by suspended solids. Thus, the ion-exchange resin was replaced by an ion-conducting spacer in order to overcome the drawback. The system equipped with the ion-conducting spacer resolved the problem of the decreasing flow rate but showed a lower efficiency in terms of the power consumption, the removal rate of metal species and current efficiency. In the repeated batch operation, it was found that the removal efficiency of metal species was stably maintained at DF 1000.

• Journal of Radiation Protection and Research
• /
• v.36 no.1
• /
• pp.28-34
• /
• 2011

The measurement-based verification for intensity modulated radiation therapy (IMRT) is a time-and labor-consuming procedure. Instead, this study aims to develop a MU fluence reconstruction method for IMRT QA. Total actual fluences from treatment planning system (TPS, Eclipse 8.6, Varian) were selected as a reference. Delivered leaf positions according to MU were extracted by the dynalog file generated after IMRT delivery. An in-house software was develop to reconstruct MU fluence from the acquired delivered leaf position data using MATLAB. We investigated five patient's plans delivered by both step-and-shoot IMRT and sliding window technologies. The total actual fluence was compared with the MU fluence reconstructed by using commercial software (Verisoft 3.1, PTW) and gamma analysis method (criteria: 3%/3 mm and 2%/1 mm). Gamma pass rates were $97.8{\pm}1.33$% and the reconstructed fluence was shown good agreement with RTP-based actual fluence. The fluence from step and shoot IMRT was shown slightly higher agreement with the actual fluence than that from sliding window IMRT. If moving from IMRT QA measurements toward independent computer calculations, the developed method can be used for IMRT QA. A point dose calculation method from reconstructed fluences is under development for the routine IMRT QA purpose.

• Journal of Navigation and Port Research
• /
• v.26 no.1
• /
• pp.22-27
• /
• 2002

The 25 Watt hybrid MIC SSPA has been developed in the frequency rang from 1.6265 GHz to 1.6465 GHz for uplink of INMARST's earth station. To simplify the fabrication process, the whole system is designed of two parts composed of a friving amplifier and a power amplifier. The Motorolas MRF-6401 is used for driving part, the Motorolas MRF-16006 and MRF-16030 is used the power amplifier. We reduced weight and volume of high power amplifier through arranging the bias circuits in the same housing. The realized SSPA has more than 30 dB for gain within 20 MHz bandwidth, and the voltage standing wave ratios(VSWR) of input and output port are less than 1.7, respectively. The output power of 44 dBm is achieved at the 1 dB gain compression point of 106365 GHz These results reveal a high power amplifier of 25 Watt which is the design target. The Proposed SSPA manufacture techniques in this paper can be applied to the implementation of high power amplifiers for some radars and SCPC.

• Journal of Korea Water Resources Association
• /
• v.41 no.8
• /
• pp.761-772
• /
• 2008

The object of this study is to develop the model that solves the numerically difficult problems in hydraulic engineering and to demonstrate the applicability of this model by means of various test examples, such as, verification in the gradually varied unsteady condition, three steady flow problems with the change of bottom slope with exact solution, and frictional bed with analytical solution. The governing equation of this model is the integral form of the Saint-Venant equation satisfying the conservation laws, and finite volume method with the Riemann solver is used. The evaluation of the mass and momentum flux with the HLL Riemann approximate solver is executed. MUSCL-Hancock scheme is used to achieve the second order accuracy in space and time. This study introduce the new and simple technique to discretize the source terms of gravity and hydrostatic pressure force due to longitudinal width variation for the balance of quantity between nonlinear flux and source terms. The results show that the developed model's implementation is accurate, robust and highly stable in various flow conditions with source terms, and this model is reliable for one-dimensional applications in hydraulic engineering.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.3 no.2
• /
• pp.18-35
• /
• 1993

The water level control system of the steam generator in a pressurized water reactor and its control problems are analysed. In this work the stable control strategy during the low power operation and transient states is studied. To solve the problem, a fuzzy logic control method is applied as a basic algorithm of the controller. The control algorithm is based on the operator's knowledges and the experiences of manual operation for water level control at the compact nuclear simulator set up in Korea Atomic Energy Research Institute. From a viewpoint of the system realization, the control variables and rules are established considering simpler tuning and the input-output relation. The control strategy includes the dynamic tuning method and employs a substitutional information using the bypass valve opening instead of incorrectly measured signal at the low flow rate as the fuzzy variable of the flow rate during the pressure control mode of the steam generator. It also involves the switching algorithm between the control valves to suppress the perturbation of water level. The simulation results show that both of the fine control action at the small level error and the quick response at the large level error can be obtained and that the performance of the controller is improved.

• Weed & Turfgrass Science
• /
• v.4 no.1
• /
• pp.26-34
• /
• 2015

Korean Poaceae includes approximately 80 species of the agricultural weeds. Precise species identification is the first step for more effective weed management in the agricultural fields. However, the identification of species in Poaceae is not easy without the assistance of taxonomists or identification experts although they are relatively easy to distinguish from the plants of the other family by the unique characteristics of caryopsis. Thus, DNA barcode was suggested as an alternative powerful technique for species identification by using short sections of DNA from a specific region of the genome. Two standard barcode markers of vascular plants, chloroplast rbcL and matK, and a supplementary nuclear ribosomal Internal Transcribed Spacer (ITS) region were used for barcode of major Korean Poaceae weeds, 403 individuals of 84 taxa. All the barcode markers revealed a good level of sequencing success with the lowest 73.7% for matK and the highest 88.8% for rbcL. The barcode sequences were deposited to the National Center for Biotechnology Information (NCBI) database for public use. Combined matK and ITS showed very high resolving power with 92.9%. Besides the identification of weeds for weed managment, the generated DNA barcode data could be used for many other applications such as rapid biodiversity assessment and conservation prioritization.

• Korean Journal of Medicinal Crop Science
• /
• v.10 no.2
• /
• pp.120-125
• /
• 2002

This study was carried out to find the possibility of use of Solid Phase Microextraction (SPME) for extracting the volatile aroma compounds in the five aromatic plants (Agastache rugosa O. Kuntze, Mentha arvensis Linne, Thymus quinquecostatus Celakovsky, Elsholtzia splendens Nakai, Schizonepta tenuifolia Briquet) belongs to the Labiatae. In the result of the analysis, the volatile aroma compounds were mainly composed monoterpene alcohol (linanol, menthol, ${\alpha}-terpineol$, borneol), monoterpene ketone (limonene, menthone) and sesquiterpene (trans-caryophyllene,${\delta}-cadinene)$. The volatile aroma compounds of Agastache rugosa O. Kuntze and Mentha arvensis Linne were extracted by SPME more identified than the SDE. However, Schizonepta tenuifolia Briquet more identified by the SDE and in Elsholtzia splendens Nakai similar to the SDE. Especially, the SPME showed the sesquiterpene contents was more than the SDE. The major volatile aroma compounds were difference but the composition of those between the SPME and the SDE showed no difference. Within the results, the SPME showed the most convenient and a rapid extraction method to analysis of the volatile aroma compounds.

• Korean Journal of Clinical Laboratory Science
• /
• v.39 no.1
• /
• pp.49-55
• /
• 2007

HCV is a single-stranded RNA virus and more than 1 million new cases are reported annually worldwide. The six major HCV genotypes and numerous subtypes vary in their geographic distribution. It is thought that genetic heterogeneity of HCV may account for some of the differences in disease outcome and response to treatment observed in HCV infected persons. In this study, we determined HCV genotypes among chronic Korean HCV patients and evaluated direct sequence PCR protocols developed. For the study, 232 chronic HCV patient sera were used. HCV RNA was extracted and two pairs of consensus PCR primers were selected in 5'UTR region for amplification of HCV RNA. Amplification products obtained from the HCV positive cases were subjected to automatic sequencing. Sequences were compared with those in GenBank by using the BLAST program. From this study, five HCV genotypes, 1b, 2a, 2b, 2c and 3a were found. HCV genotypes 4, 5 and 6 were not determined. HCV genotype 1b (53.9%, 125/232) and 2a (35.8%, 83/232) were most frequently found. This group was followed by 2b (3.9%, 9/232), 3a (3.4%, 8/232) and 2c (3.0%, 7/232). The data presented here suggest a complex distribution of HCV types and they were well correlated with other reports on Koreans and will be helpful for type-specific follow-up of Korean HCV patients. This study showed that 5'UTR direct sequence analysis is a sensitive and rapid method to identify HCV genotypes.

• KSBB Journal
• /
• v.24 no.3
• /
• pp.227-238
• /
• 2009

In the recent years, some organic toxic chemicals were used for obtaining high-yield productivity in agriculture. The undegraded pesticides may remain in the agricultural foods through atmosphere, water, and soil and cause public health problems to environmental resources and human beings even at very low concentrations. Small amounts of pesticides can affect a central nervous system, resulting in immunogenic diseases, infertility problems, respiratory diseases and born marrow diseases, which can lead even to death. Monitoring of the environmental pesticide is one of the important issues for the human well-being. Several kinds of biosensors have been successfully applied to the detection of agrichemical toxicity. Also, few platforms for biocide detection have been definitely developed for the degradation and reaction of pesticides. Biochip and electrochemistry experiments involve immobilizing a receptor molecule on a solid substrate surface, and monitoring its interaction with an analyze in a sample solution. Furthermore, nanotechnology can be applied to make high-throughput analyses that are smaller, faster and sensitive than conventional assays. Some nanomaterials or nanofabricated surfaces can be coupled to biomolecules and used in antibody-based assays and enzymatic methods for pesticide residues. The operation procedure has become more convenient as it does not require labeling procedure. In this paper, we review the recent advances in agrichemical defection research and also describe the label-free biosensor for pesticides using various useful detection methods.

• Geotechnical Engineering
• /
• v.10 no.2
• /
• pp.25-40
• /
• 1994

In order to investigate behavior of lateral flow by plasticity of soils and construction control due to it, in the case of unsymmetrical surcharge load on the soft soils, we examine the existing theoretical background, and compared and analysed the experimental results by model test. After model test fabricated by model test apparatus, which made full remolding samples of soft soils, we observed the state of behavior for deformation with increasing load step to constant time interval. The critical surcharge and ultimate capacity showed tendency to approach to the proposed value of Jaky and Meyerhof, and the lateral flow pressure of which the maximum value was acted on the depth calculated by z/H=0.26+1.71cu and one third value of the maximum lateral flow pressure acted on the ground surface, approach the trapezoid distribution And maximum lateral flow pressure will be calculated by proposed equation of Hong or simple equation which($\alpha=0.4$) the flow pressure coefficient . of proposed equation by Tschebotarioff exchanged to($\alpha=K_0$) . Basides, the failure surcharge by [(q/$y_m$)-q] and [$S_y-(y_m/S_y)$] showed the smaller than ultimate bearing capacity, especially failure criteria line of control diagram of [$S_y(y_m/S_y)$] will be calculated by following equation. $S_y.=3.15exp[-0.58(y_m/S_y)$