• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.3
• /
• pp.129-138
• /
• 2017

The coastal wave environment is a very important factor that directly affects the change of coastal topography, the habitat of marine life, and the design of offshore structures. In recent years, changes in the wave environment due to climate change are expected, and a trend analysis of the wave environment using available data sets is required. In this paper, significant wave heights which are measured at six ocean buoys (Deokjeokdo, Oeyeondo, Chibaldo, Marado, Pohang, Ullengdo) have been used to analyze long-term trend of normal waves. In advance, the outlier of measured data by Korea Meteorological Administration have been removed using Rosner test. And Pearson correlation analysis between the measured data and ECMWF reanalysis data has been conducted. As a results, correlation coefficient between two data were 0.849~0.938. Meanwhile, Mann-Kendall test has been used to analyze the long-term trend of normal waves. As a results, it was found that there were no trend at Deokjeokdo, Oeyeondo and Chibaldo. However, Marado, Pohang and Ullengdo showed an increasing tendency.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.170.1-170.1
• /
• 2015

안티모니 (Sb)를 기반으로 한 제2형 초격자 (Type II superlattice, T2SL)구조 적외선 검출기 연구는 2000년대 들어 Sb 계열의 화합물 반도체 성장 기술이 발전함에 따라 HgCdTe (MCT), InSb, 양자우물 적외선 검출기 (QWIP)를 대체할 수 있는 고성능의 양자형 적외선 검출 소재로 부상하였으며, 현재 전 세계적으로 활발한 연구가 진행되고 있다. 특히, 기존의 양자형 적외선 검출소자에 비해 전자의 유효질량이 상대적으로 커서 밴드 간의 투과전류가 줄어들 뿐만 아니라, 전자와 정공이 서로 다른 물질 영역에 분포하여 Auger 재결합률을 효과적으로 줄일 수 있어 상온 동작이 가능한 소재로 주목을 받고 있다. 또한, T2SL 구조는 초격자를 구성하는 물질의 두께나 조성 변화를 통한 밴드갭 변조가 용이하여 단파장에서 장파장 적외선에 이르는 광범위한 파장 대역에서 동작이 가능할 뿐만 아니라 구조적 변화를 통해 이중 대역을 동시에 검출 할 수 있는 차세대 적외선 열영상 소자로 알려져 있다. 본 연구에서는 분자선 에피택시(MBE)법을 이용하여 300 주기의 InAs/GaSb (10/10 ML) 제2형 초격자 구조를 성장하여 적외선 검출소자를 제작하였다. 제2형 초격자 구조를 구성하는 물질계에 p-type dopant인 Be을 이용하여 각각 도핑 농도가 다른 시료를 성장하였다. 이때 p-type 도핑 농도는 각각 $1/5/10{\times}10^{15}cm^{-3}$로 변화를 주었다. 성장된 시료의 구조적 특성 분석을 위해 고분해능 X선 회절 (High resolution X-ray diffraction, HRXRD)법을 이용하였으며, 초격자 한 주기의 두께가 6.2~6.4 nm 로 설계된 구조와 동일하게 성장됨을 확인 하였으며, 1차 위성피크의 반치폭은 30~80 arcsec로 우수한 결정성을 가짐을 확인하였다. 적외선 검출을 위한 $410{\times}410{\mu}m^2$ 크기의 단위 소자 공정을 진행하였으며 이때 적외선의 전면 입사를 위해 소자 위에 $300{\mu}m$의 윈도우 창을 제작하였다. 단위 소자의 측벽에는 표면 누설 전류가 흐르는데 이를 방지하기 위해서 표면보호막을 증착하였다. 적외선 검출 소자의 전기적 특성 평가를 위해 각각의 시료의 암전류 (dark current)와 파장별 반응 (spectral response)을 온도별로 측정하여 비교 및 분석하였다.

• Korean Journal of Poultry Science
• /
• v.14 no.1
• /
• pp.33-38
• /
• 1987

Two hundred and forty female day-old broiler chicks were employed in this study to investigate the influence of grains containing different levels of dietary fiber on the growth rate, carcass fat content and abdominal fat pad weight. Corn and sorghum were used as low-fiber grains, and rye and hulled barley as high-fiber grains. During the 6 weeks of feeding period, chicks were fed one of the four diets which were iso-caloric and iso-nitrogenous. Birds were Tandomly allotted to 20 battery cages. There were five replicates per treatment and 12 chicks per replicate (pen). Data were subjected to the one-way ANOVA test, and when significant at 5% level, then means were compared by the method of Duncan (1955). At 3 weeks of age, rye-fed chicks grew significantly slower than did the other birds. At 6 weeks of age, the growth rates of chicks fed rye and sorghum were significantly lower than those of birds fed barley ana corn. Carcasses from birds fed rye showed significantly lower tat content than those from birds fed corn and sorghum at 3 weeks of age. No significant difference was found between rye and barley in this context. At 6 weeks of age. however, this difference in carcass fat content disappeared. No significant difference in abdominal fat pad weight was found among four grains at both 3 and 6 weeks of ages.

• Journal of Korea Port Economic Association
• /
• v.29 no.2
• /
• pp.1-17
• /
• 2013

This paper aims to review the fairness of carriers' incentive schemes at Gwangyang port in 2010 and to show the desirable incentive allocation rules using the proportional and egalitarian rules under cooperative game theory. The carriers' incentive schemes at Gwangyang port in 2010 did not meet the no-envy and the efficiency, and satisfy the symmetry axiom. According to the research findings, the equal surplus method satisfies the axioms of equity, efficiency, symmetry, and progressivity. However, the uniform losses method meets the axioms of equity, efficiency, symmetry, and regressivity. We use a single allocation criterion of the total throughput to show the regressivity and the symmetry principles into the incentive scheme instead of using multiple criteria such as total throughput, increased volume, and coastal volume. The uniform losses method based on the total throughput can distribute the incentive amount according to the intent of the incentive schemes. Hence, we need to establish a rationing system to allocate reasonably the total amount of different types of incentives, avoiding the temptation to adjust the volume shipped between the ports of carriers considering the efficiency of allocation.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.292-299
• /
• 2018

The vehicle exterior design is the main parameter of aerodynamic wind noise, but the modification of it is nearly impossible at a proto-type stage. Therefore, it is very important to verify exterior design and estimate the correct wind noise level at the early vehicle design stages. The numerical simulations of aerodynamic wind noises around A-pillar and wiper were developed for specific vehicle exterior designs, but could not be directly used for the discussions with designers because these need complex modeling and simulation process. This study proposes new approach to A-pillar and wiper wind noise estimation at design stage using response surface methodology of modeFRONTIER, of which database is composed of PowerFLOW simulation, PowerCLAY modeling, SEA-Baced (Statistical Energy Analysis-Based) interior noise simulation, and turbulent acoustic power simulation. New design parameters are defined and their contributions are analyzed. A state-of-the-art, easy and reliable CAT (Computer Aided Test) tool for A-pillar and wiper wind noise are acquired from this study, which shows high usefulness in car development.

• Journal of Environmental Impact Assessment
• /
• v.26 no.6
• /
• pp.431-444
• /
• 2017

This study was carried out to review the guidelines being used by law and national policy concerned on river environments management and suggest the applicability of newly developed river environment assessment system. In the current legal system, the national river environment management system is insufficient in securing an independent status in the legal institutional system which is separated to the Ministry of Land, Transport and Infrastructure and the Ministry of Environment. And the river environment assessment system of the national standard, which is a core matter, has not been established yet. In particular, there is a lack of integrated approach between the upper and lower plan or related plans on water resources, water quality, river environment and aquatic ecosystem management. In addition, the consistency and effectiveness as the process of planning and design according to the current status and comprehensive analysis and evaluation of the river environment were not secured either. To integrate national river environment management system and improve efficiency, I proposed the establishment of hierarchy and connection between national river plans, and the adoption and application of developed assessment system based on characteristics of river environment in Korea. Finally, I proposed the separated application with dividing the developed assessment system including the naturalness of river environment and suitability of water friendly activity into both assessment method for management plan of water resources of river basins & basic river plan respectively.

• Composites Research
• /
• v.24 no.6
• /
• pp.56-63
• /
• 2011

The objective of this study is to investigate appropriate bonding methods of solar cells in order to apply solar cells, which have been receiving particular attention as a renewable energy due to fossil energy depletion and environment issues, to composite structures. Back-contact solar cells with approximately 24.2% energy conversion efficiency were used in this study. Since silicon-based solar cells are mechanically fragile, the secondary-bonding methods using adhesive were examined in this study. The experiment was conducted with three kinds of bonding materials such as EVA film, Resin film and elastic adhesive. The performance of solar cells for three types of adhesives under mechanical loading on test specimens is conducted. In addition, the measuring equipment was designed to evaluate the performance of the solar cells under mechanical loading in real time and the fracture characteristics depending on bonding materials were evaluated. The reason decreasing solar cells efficiency were analyzed and considered by Fractography. The results show that the solar cell performance is largely affected by bonding techniques. Moreover, the bonding method using elastic adhesive shows best solar cell efficiency.

• Journal of Navigation and Port Research
• /
• v.27 no.2
• /
• pp.233-238
• /
• 2003

Due to the impermeability of outer wall facilities such as Breakwaters which dissipates the wave energy and keeps harbor tranquility, the enclosed area of harbor becomes partially blocked and the water exchange can be reduced. Recent trends of port development protect water quality and emphasize Water-Front, so the method which enhances the circulation of harbor waters and the dilution of the water pollutants are studied. The best improvement of water quality is a remove of pollutant source on land, but an enclosed port must be enhanced the tidal exchange. For this end, the best improvement may be made a drain-route on the existing outer wall facilities. In this study, the numerical computations were carried out to predict the circulation of harbor waters and the tidal exchange through the drain-rout in the polluted harbor(Samchonpo-guhang) located at the east coast of South Sea. Computational models adopting FDM(Finite Difference Method) were used here and were already verified from the previous studies und ocean survey. As a result of this study, circulation and the tidal exchange at the harbor before and after introduction of drain-route were assessed.

• 대한공업교육학회지
• /
• v.40 no.2
• /
• pp.175-195
• /
• 2015

This study is aimed at exploring the educational meaning of cooperative hands-on activity in the technology subject from the perspective of a student who is an education consumer. For this purpose, this study selected 12 first year student of a middle school located at G City of Gyeonggi-do Province as research participants through purposeful sampling, and conducted an in-depth interview and group discussion based on stimulated recall questionary techniques. This study utilized area analysis, classification analysis and component analysis as a data analysis method, and secured the verity of the research through the examination between research participants and triangulation. As a result of this research work, it was found that the cooperative hands-on class in the technology subject had the meaning of 'Space between a burden and excitement about the technical making', 'Clue and ignition point of technological problem solving', and 'Self-discovery through Technical capability'. To be more concrete, 'Space between a burden and excitement about the technical making' means that students, whose usual school record is excellent, felt great psychological burdens of performance assessment, but their pre-experience and interest in 'Making' induced them to feel exhilaration of hands-on activity. 'Clue and ignition point of technological problem solving' means that students get to make much of the understanding & formation of the relationship with teammates in the process of resolving an unfamiliar hands-on activity task and to have the continuous problem-solving ability. 'Self-discovery through Technical capability' means that students get to realize the importance of learning experience of one's own making through hands-on activity learning, which could be the opportunity to meet the operant demands of the inner side. This study hopes that such results could be utilized as the basic data needed for designing the hands-on activity education in the technology subject more meaningfully and systematically for the time to come.

• The Journal of Korean Institute of Information Technology
• /
• v.15 no.12
• /
• pp.157-164
• /
• 2017

Mobile ECG signal measurement is a technique to measure small signals of several mV, and many studies have been conducted to remove noise including wandering scheme. Removal of the equipotential line noise caused by shaking or movement of the electrode cable is one of the core research contents for the electrocardiogram measurement. In this study, we proposed a modified step-size of combined NLMS(normalized least squares) and DLMS(delayed least squares) adaptive filter to eliminate baseline noise from ECG signals. The proposed method mainly adjusts initial filter step-size to reduce distortion of original ECG signals characteristic after eliminating baseline noise. The modified filter step-size is scaled by filter order size and distortion minimization factor. This method is suitable for portable ECG device with a small processor and less power consumption. This technique also decreases computation time which is essential for real-time filtering. The proposed filter also increase the signal to noise ratio (SNR) compared to conventional NLMS filter.