• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.539-549
• /
• 1999

In this paper, the bit error rare (BER) performance of DS/CDMA DQPSK communication system in the presence of multi access interference, impulsive noise and Nakagami fading is investigated. The DS/CDMA DQPSK communication system adopts Maximum Ratio Combining (MRC) diversity reception and error correcting BCH code technique to enhance system performance. Using the derived error probability equation, the error rate performance of DS/CDMA DQPSK communication system has been evaluated and shown in figures to discuss as a function of impulsive index(A), Gaussian noise to impulsive noise power ratio($\Gamma$'), multi access interference(Κ), Nakagami fading parameter(m), the number of diversity branch (Ｌ), the number of error correction symbol (t), PN code sequence length(N) and $E_b/N_0$. The error performance of DS/CDMA-MDPSK signals improve by adopting MRC diversity and BCH(15,7) coding technique in the environment of impulsive noise plus Nagakami fading. From the results, we known that proposed system is affected by multi access interference, impulsive noise and Nakagami fading in radio communication system environment. Also, BER performance of DS/CDMA DQPSK communication system cam be improved increasing either the power of desired signal or the value of Gaussian noise to impulsive noise power ratio. And BCH(15,7) code technique is more effective to restrain the affection of multi access, interference, impulsive noise and Nakagami fading in DS/CDMA DQPSK communication system than MRC diversity reception technique.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.17 no.3
• /
• pp.21-34
• /
• 1990

Trail and campground deteriorations and their environmental changes of soil and vegetation were studied in Tonghwa -Sa district of Mt. Palgong Natural Park through 1988 into 1989. The results are summarized as follows : 1. The bare width of trail as one of the trail condition factor was significantly greater on the more heavily used trail. Deterioration types of trail which had higher frequency for a total of 45 observations were rock exposure(42%), trail deepening(40%) and root exposure(18%) in the high order. And also sound type on which the trail was not deteriorated at all amounted to 33% of all observations. 2. Ecological changes of soil and vegatation of trailsides were not found at a uniform tendency except that soil hardness was slightly decreased from trail edge to the forest, but they could be grouped by the type of user\`s behavior and site conditions. Use impacts on the natural environment of trailside in Mt. Palgong are still far from the severe harmulness. 3. Worse damages to compground condition were appeared in Bawi-gol than Susu-gol campsite. Types of mechanically damaged trees were tree with exposed root(63% ), scared tree(43% ), mutilated tree(30 % ) and felled tree in highly frequent order. And diameter increments of trees in campsites were oppressed by the campers. 4. Tree damage types and their frequencies could be basic as a means of which grasp the bounds of user's impacts. User's disturbance on campsite extended to the distance of 70∼90m from the core of campsite at Pawi-gol and 20∼30m at Susu-gol respectively. As the tolerant trees to use impact, Lespedeza maximowiczii, Rhus trichocarpa, Acer palmatum, Rubus crataegifolius and Celastrus orbiculatus were considered.

• Explosives and Blasting
• /
• v.16 no.2
• /
• pp.34-46
• /
• 1998

We developed a method to control vibration from some blasting points. This method uses a correlation of vibration waves to decide the most effective delay time to control vibration by interfering vibration waves with each other. We applied this method to the small blasting using mortar blocks and examined the effect on controlling vibration. As the result of the examinations, the maximum vibration velocity by this method caused by five detonators blasting in row of five holes became smaller than that by a detonator blasting in the nearest hole from the measuring point. And the velocity was about one fifth of that of maximum condition in which vibration waves caused by the five detonators arrivved at the same time to the measuring point.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2007.05a
• /
• pp.239-245
• /
• 2007

차세대 유비쿼터스 환경에서 중요한 기술적, 산업적 위치를 차지하는 RFID 네트워크에는 다수의 RFID 리더(Reader)와 수많은 RFID 태그(Tag)들이 통신을 하면서 존재하게 된다. 이러한 RFID 네트워크에서 리더와 태그간의 원활한 통신을 위해서는 주파수 충돌이 발생하지 않아야 한다. 주파수 충돌 현상은 리더와 다수의 태그들 간의 태그 충돌(Tag Collision)과 리더간 주파수 간섭으로 인한 리더간 충돌(Reader Collision)로 나뉘어 질 수 있다. 따라서 리더간 충돌 현상을 피하기 위해서는 근접한 리더들 간에 서로 다른 타임슬롯(Timeslot)을 사용하여 태그와 통신을 시도하여야 한다. 본 연구에서는 RFID 네트워크에서 다수의 리더간 충돌을 최소화하며 안전한 태그 인식을 할 수 있도록 타임 슬롯 할당 문제를 CSP(Constraint Satisfaction Problem)로 접근한다. 그리고 CSP를 풀기 위해 리더간 충돌 문제가 가지고 있는 제약조건을 찾아내고 해를 찾기 위한 목적함수를 모델링 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.12
• /
• pp.771-773
• /
• 2014

Dual-polarization antenna system has been being researched for wireless communications under short range line-of-sight channel environments. In this paper, probability density function of signal-to-interference-ratio(SIR) for the dual-polarization antenna system is derived, and SIR outage is analyzed. It is shown that the upper bound capacity of a dual-polarization antenna system without polarization alignment is 4.5324 bps/hz.

• Korean Journal of Optics and Photonics
• /
• v.10 no.5
• /
• pp.413-418
• /
• 1999

We report on the frequency response of microwave signal processing networks using optical fiber circuits. Microwave frequency rejection filters using Mach-Zehnder interferometer and Fabry-Perot interferometer are modelled theoretically and tested experimentally. Graphical representation method provides a simple tool for computating single mode fiber delay-line microwave filters. The calculated results are in good agreement with experimental results. A 36dB microwave frequency rejection filter is also demonstrated.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.51-55
• /
• 2004

Surface plasmons (SPs) are charge density oscillations that propagate along an interface between a dielectric and metal. In this paper, the electric field of SPs and the intereference of two SPs are observed by using Near-field Scanning Optical Microscope (NSOM). The excitation condition of SPs is changed as the optical tip approaches the metal surface, because the excitation condition of SPs is very sensitive to surface structures. To measure the microscope field of SPs, the distance between metal surface and optical tip must contain a specific interval.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.2
• /
• pp.461-470
• /
• 1996

In this paper, the average probability of bit error of direct sequence spread spectrum multiple access (DS/SSMA) communication system is derived over frequency-selective rician fading channels with Gaussian and impulsive noise. Multiple access interference due to K asynchronous users transmitting simultaneously is computed using the characteristic function method, and compared with Gaussian approximation.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.648-651
• /
• 2011

본 논문에서는 3차원 섬유분포를 가정하여 고유동 섬유보강 시멘트 모르타르의 유동에 따른 섬유방향성변화를 해석적으로 파악해 보았다. 유동흐름은 평면상의 2차원 완전발달 전단흐름을 고려하였다. 유동에 따른 섬유의 회전운동은 섬유간의 상호 간섭효과를 무시한 Jeffery의 기본식에 근거하였다. 굳지 않은 섬유혼입 모르타르의 유동에 따른 섬유방향성 분포 변화를 흐름선과 동일 유동거리 상의 단면에 대해 파악하였다. 그 결과, 단면 내 위치에 따라서 섬유방향성 분포 변화가 크게 차이가 발생하는 것을 확인할 수 있었다. 또한 유동거리에 따른 단면상의 섬유방향성 분포는 초기 유동거리에서 분포 형상에 큰 변화가 발생하였고, 유동에 따라 섬유가 유동방향과 나란하게 놓이는 경향이 커지는 것을 확인할 수 있었다. 이러한 섬유방향성 변화의 예측은 섬유보강 시멘트 복합체의 인장특성에 예측하는데 유용하게 사용될 것이다.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.4
• /
• pp.82-87
• /
• 1998

여러 음원들에 의해 형성된 파동장내에서 각 신호음의 주파수 특성과 시간 지연 (time delay)을 추정할 수 있는 알고리즘을 개발하였다. 이 알고리즘의 관련 수식은 두 개의 상호 간섭하는 신호가 입사하고 여기에 주변 환경에 의한 랜덤 잡음이 첨가된다고 가정하여 유도되었으며 두 개 이상의 신호음이 있는 상황에 대해 확장이 가능하다. 본 논문에서 시간 지연이 일정한 수신 신호 영역에 등간격으로 놓여진 수신기로부터 각 센서에 수신된 신호의 스펙트럼은 M개의 센서에 대해 K개의 음원 스펙트럼과 K개의 조정 벡터(steering vector) 의 선형 조합(linear combination)으로 주파수에서 모델된다. 각 음원의 주파수 특성과 음원 으로 들어오는 신호의 입사각을 결정하기 위하여 본 알고리즘은 전달 행렬(transfer matrix) 을 계산하고 그 전달 행렬의 고유값(eigenvalue)과 고유벡터(eigenvector)를 분석한다. 이 고 유값들은 복소수이며 그 크기는 진폭 변환 계수를 결정한다. 위상은 수신기의 간격으로부터 시간 지연을 결정하는 기울기를 갖는 주파수의 선형 함수이다. 전달 행렬에의 입력 자료들 은 동일 간격 소자간의 cross-power spectra이다.