• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.52-59
• /
• 2004

This paper shows about the machine simulation embodiment when it happens NC equipment and between workpiece and interference in 5 axises machining of aluminium alloy a vehicles parts. And this research has been chosen because of the highest equipment interference occurrence rate at a vehicles parts processing of 5 axises horizontal machine. It can verify simulation and machining process through correlation of their dynamic relations, interference, collision as embodied virtual manufacturing system of machine, workpiece, and holder etc. That is necessary element in shape of machine tool, function and processing in imagination ball. Also, it verifies about interference and collision between NC equipment and workpiece, as it applied machine simulation to NC Data of actuality aircraft parts of BULKHEAD and FRAME. As the result of this study, by removing the equipment interference and collision element which creates NC data, the virtual machine tool it the efficiency of machine process has increased.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.233-237
• /
• 1992

본 연구에서는 offset곡면의 Intersection check 알고리즘중 최근에 발표된 Barnhill의 알고리즘을 곡면간의 교차곡선 계산에 이용하고, 교차가능 영역의 판정은, Bezier 특성다각형의 성징을 이용해 계산속도를 높였다. 여기서 얻어지는 교차곡선 사이의 간섭영역 제거로 간섭없는 공구경로를 산출해 내므로서 가공 data의 저장에 필요한 memory의 크기도 줄일 수 있었으며, 공구경로의 선정에도 유연성을 가질 수 있다.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.6
• /
• pp.22-29
• /
• 2013

As construction projects are getting larger, more complex and specialized, the size and scale of the structures are increasing and large-scale projects with multiple participants involved have continuously been ordered. Due to the nature of a large-scale construction project, when there are interferences and conflicts in process, schedule and area among project participants, the project requires more time and efforts to resolve the issues as it progresses further. This study suggests the interface management model that is time-saving and physically beneficial in solving interface issues based on case study. This study provides a practical management model including the organization of interface consultative group, checklist preparation, LIST management and PMIS application, which will be useful for the construction sites seeking effective know-how to manage design interferences and changes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1728-1730
• /
• 2015

In this letter, a parity check based iterative IC scheme is proposed for LDPC coded MIMO systems. After the decoding procedures in each iteration of the proposed scheme, each decoded codeword is utilized for the IC procedures only when the ratio of the check nodes satisfying the parity check equations to the total number of check nodes is not smaller than the pre-defined threshold value. Simulation results verify that the proposed scheme can achieve an improved BLER at the high SNR region compared to the conventional iterative IC scheme.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.8-11
• /
• 2002

In this study, Automatic design program creates 3D solid models and constructs them. The method of making assembly model is two. One assembles the element made in automatic design program with hand, the other develops the automatic design program for creating assembly model. Automatic design program improves the convenience of user. In creating gears, involute ewe and Trochoidal fillet curve are made by mathematical development.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.1
• /
• pp.39-47
• /
• 2013

Top Drive Machine is drilling equipment which transfers motor torque to the drill bit. Kelly Rotary Table of the Derrick Drilling Machine (DDM) is firstly developed at 1983, and the first commercial model DDM 650DC was released at 1984. Offshore drilling business is high value-added industries. "N" Company of U.S.A and "A" company of Norway hold more than 90 percent of the global offshore drill system market, so it is hard to take away market share and develop offshore drilling equipment. Consequently, this paper introduce method for concept design of new reliability machine by limited information. To achieve this, design & analysis tools as CATIA, DELMIA, Pro Engineering, ANSYS were used to evaluate design error and strength/flow analysis at new concept design in Top Drive Machine.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.1
• /
• pp.23-26
• /
• 2000

In spot welded joint. Electronic Speckle Pattern Interferometry(ESPI) method using the Model 95 Ar laser a video system and an image processor was applied to measure the stress Unlike traditional strain gauges or Moire method, ESPI method has no special surface preparation or attachments and can be measured in-plane displacement with non-contact and real time. In this experiment, specimens are loaded in parallel with a load cell. The specimens are made of the cold rolled steel sheet with 1mm thickness, are attached strain. gauges. This study Provides an example of how ESPI has been used to measure stress and strain inspecimen. The results measured by ESPI are compared with the data which was measured by strain gauge method under tensile testing.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.3
• /
• pp.43-55
• /
• 2012

A methodology for BIM Quality Assurance in the construction industry is becoming increasingly an important issue to determine the reliability of BIM. However, the quality assurance of BIM is currently limited to check 3D models, such as clash detection and space layout while verification methods for disciplinary BIM results from structural engineering, mechanical engineering, and estimation do not exist yet. Particularly, in the BIM-based estimation mathematical equations to take off quantities are not clearly exposed so that the results are not quite accepted at practices. With the concept of reliability engineering defined in the manufacturing industry to improve reliability of outcomes of BIM-based quantity take-off, impacting factors that affect reliability of BIM-based quantity take-off were derived. It was found that the factors also include the modeling method and the features of a BIM tool. Therefore, this research aims to propose modeling and verification methods to improve reliability of BIM-based quantity take-off through the pilot test that was performed with commercial BIM tools and IFC-based BIM data.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.5
• /
• pp.53-64
• /
• 2010

Remodeling becomes the significant issue in the aspect of the resource recycling, because it does not demolishes the whole buildings, but a part of main structure. However, compared with new construction, remodeling has several problems of adding the repair and rehabilitation works, using the partial demolition method, and having difficulties of making decision due to disagreement between several owner organizations. BIM, which is the total solution for managing and producing information during whole life cycle of the buildings, seems to be the right solution for the way to address these issues. has a possibility for solving the problems. Therefore this paper provided the framework and database for applying the BIM in the remodeling, and proved the applicability of the BIM database in the remodeling project through the case studies.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.529-533
• /
• 1996

Recently, manufacturing industries are doing their best to increase productivity and to reduce production time. One of tile efforts is to develop user-friendly and effective CAM systems. For this purpose, a CAM system for turning was developed. In the developed system. user interacts with tile CAM system using graphical user interface (GUI) and manufacturing support functions to make NC programs effectively. Manufacturing support functions include cycle decoder. interference check be ween tool and workpicce. bar turning without air cut and dynamic/wireframe simulation. In the cycle decoder. basic options are provided to novices for their convenience. and advanced options are provided to help expert to modify the program using their knowledge. Interference check has been nil issue in tile CAM system for tuning. In this paper. when a user selects a tool. interference check between selected tools and workpieces is done automatically. Moreover. remaining shapes are calculated automatically. Then, tile CAM system requests user to input all additional tool and generates NC codes to cut tile remaining shapes. In bar turning of forged raw material, air cut should be prevented for effective machining. For this purpose, a new algorithm for bar turning was developed. Dynamic and wireframe simulation was used to verify the generated NC code.